;--------------------------------------------------------------------------------;
; Do NOT edit this file as it is auto-generated by FreePBX. All modifications to ;
; this file must be done via the web gui. There are alternative files to make    ;
; custom modifications, details at: http://freepbx.org/configuration_files       ;
;--------------------------------------------------------------------------------;
;

[general]

; These files will all be included in the [general] context
;
#include sip_general_additional.conf

;sip_general_custom.conf is the proper file location for placing any sip general 
;options that you might need set. For example: enable and force the sip jitterbuffer. 
;If these settings are desired they should be set the sip_general_custom.conf file.
;
; jbenable=yes
; jbforce=yes
;
;It is also the proper place to add the lines needed for sip nat'ing when going
;through a firewall.  For nat'ing you'd need to add the following lines: 
; nat=yes , externip= , localhost= , and optionally fromdomain= .
;
#include sip_general_custom.conf

;sip_nat.conf is here for legacy support reasons and for those that upgrade 
;from previous versions.  If you have this file with lines in it please make
;sure they are not duplicated in sip_general_custom.conf, if so remove them 
;from sip_nat.conf as sip_general_custom.conf will have precedence.
#include sip_nat.conf

;sip_registrations_custom.conf is for any customizations you might need to do to
;the automatically generated registrations that FreePBX makes.
;
#include sip_registrations_custom.conf
#include sip_registrations.conf

; These files should all be expected to come after the [general] context
;
#include sip_custom.conf
#include sip_additional.conf

;sip_custom_post.conf If you have extra parameters that are needed for a 
;extension to work to for example, those go here.  So you have extension 
;1000 defined in your system you start by creating a line [1000](+) in this 
;file.  Then on the next line add the extra parameter that is needed.  
;When the sip.conf is loaded it will append your additions to the end of 
;that extension. 
;
#include sip_custom_post.conf


;--------------------------------------------------------------------------------;
; Do NOT edit this file as it is auto-generated by FreePBX. All modifications to ;
; this file must be done via the web gui. There are alternative files to make    ;
; custom modifications, details at: http://freepbx.org/configuration_files       ;
;--------------------------------------------------------------------------------;
;

vmexten=*97
disallow=all
allow=ulaw
allow=alaw
context=from-sip-external
callerid=Unknown
notifyringing=yes
notifyhold=yes
limitonpeers=yes
tos_sip=cs3
tos_audio=ef
tos_video=af41


allowguest=no 
videosupport=yes
trustrpid = yes 
sendrpid = pai                 ; Use the "P-Asserted-Identity" header
                               ; to send the identity of the remote party
rpid_update = yes
[polycom-check-cfg]
Event=>check-sync
Content-Length=>0

; Untested
[sipura-check-cfg]
Event=>resync
Content-Length=>0

; Untested
[grandstream-check-cfg]
Event=>sys-control

; Untested
[cisco-check-cfg]
Event=>check-sync
Content-Length=>0

; Tested
[snom-check-cfg]
Event=>check-sync\;reboot=false
Content-Length=>0
;--------------------------------------------------------------------------------;
; Do NOT edit this file as it is auto-generated by FreePBX. All modifications to ;
; this file must be done via the web gui. There are alternative files to make    ;
; custom modifications, details at: http://freepbx.org/configuration_files       ;
;--------------------------------------------------------------------------------;