[channels]
	language=ru
;	overlapdial=yes
        switchtype=euroisdn
;        switchtype=qsig
;        switchtype=5ess
;        resetinterval=never
;        pridialplan=unknown
        pridialplan=national
;        prilocaldialplan=unknown
        prilocaldialplan=national
        resetinterval = 1800
        facilityenable = yes
        signalling=pri_cpe
;        rxwink=300
        usecallerid=yes
        cidsignalling=bell
        cidstart=ring
        hidecallerid=no
        hidecalleridname=no
        callwaiting=yes
        usecallingpres=yes
        sendcalleridafter=1
        callwaitingcallerid=yes
        threewaycalling=yes
        transfer=yes
        canpark=yes
        cancallforward=yes
        callreturn=yes
;        echocancel=no
        echocancel=yes
;        echocancel=256
        echocancelwhenbridged=no
;        echocancelwhenbridged=yes
;        echotraining=800
        relaxdtmf=yes
        rxgain=0.0
;        rxgain=10.5
        txgain=-5.0
        
        group=1
        context=dahdi
        immediate=no
        mohsuggest=default
	jbenable = yes        
;	jbenable = no
;	jbforce = yes 
	jbmaxsize = 200 
;	display_send=name_initial
	display_send=name
	display_receive=name
        ;display_receive=
        channel=>1-15,17-31
			
        group=1
        context=dahdi
        immediate=no
        mohsuggest=default
        jbenable = yes
        jbmaxsize = 200
;        display_send=name_initial
        display_send=name
	display_receive=name
        ;display_receive=
; list of the following options:
;
; block:        Do not pass display text data
;               Q.SIG: Default for send/receive
;               ETSI CPE: Default for send
; name_initial: Use display text in SETUP/CONNECT messages as the party name
;               Default for all other modes
; name_update:  Use display text in other messages (NOTIFY/FACILITY) for COLP name
;               update
; name:         Combined name_initial and name_update options
; text:         Pass any unused display text data as an arbitrary display message
;               during a call.  Sent text goes out in an INFORMATION message
;
; * Default is an empty string for legacy behavior
; * The name options are not recommended for Q.SIG since Q.SIG already
;   supports names
; * The send block is the only recommended setting for CPE mode since Q.931 uses
;   the display IE only in the network to user direction
;
; display_send and display_receive cannot be changed on reload
;

         channel=>32-46,48-62

;panasonic uplink
        group=3
        context=panasuplink
        overlapdial=yes
;        relaxdtmf=yes
;        immediate=yes
        mohsuggest=default
        jbenable = yes
        jbmaxsize = 200
;        display_send=name_initial
        display_send=name
	display_receive=name
;	display_receive=
        channel=>63-77,79-93

;panasonic
        group=4
        pridialplan=unknown
        prilocaldialplan=unknown
        context=panas
;        signalling=pri_net
        switchtype=qsig
        overlapdial=yes
        resetinterval=never
        immediate=no
        mohsuggest=default
        jbenable = yes
        jbmaxsize = 200
;        display_send=name_initial
        display_send=name
	display_receive=name
;	display_receive=
        channel=>94-108,110-124

