*CLI>   == Using SIP RTP CoS mark 5
  == Using UDPTL CoS mark 5
    -- Executing [1115@mytest:1] Monitor("SIP/10-0a25a838", "wav,bri") in new stack
    -- Executing [1115@mytest:2] Dial("SIP/10-0a25a838", "dahdi/g1/1115") in new stack
-- Making new call for cr 32770
    -- Requested transfer capability: 0x00 - SPEECH
[May 18 21:11:13] ERROR[14535]: chan_dahdi.c:12173 dahdi_pri_error: dakris inside q921_transmit sapi:00 tei:127 pri->dakris_setup:0

> [ 02 ff 03 08 01 02 05 04 03 80 90 a3 18 01 81 28 05 76 72 62 61 6e 6c 04 41 81 31 30 70 05 c1 31 31 31 35 a1 ]

> Unnumbered frame:
> SAPI: 00  C/R: 1 EA: 0
>  TEI: 127        EA: 1
>   M3: 0   P/F: 0 M2: 0 11: 3  [ UI (unnumbered information) ]
> 33 bytes of data
[May 18 21:11:13] ERROR[14535]: chan_dahdi.c:12173 dahdi_pri_error: nt_ptmp: in q921_transmit_uframe and tei is:127
> Protocol Discriminator: Q.931 (8)  len=33
> Call Ref: len= 1 (reference 2/0x2) (Originator)
> Message Type: SETUP (5)
> [04 03 80 90 a3]
> Bearer Capability (len= 5) [ Ext: 1  Q.931 Std: 0  Info transfer capability: Speech (0)
>                              Ext: 1  Trans mode/rate: 64kbps, circuit-mode (16)
>                                User information layer 1: A-Law (35)
> [18 01 81]
> Channel ID (len= 3) [ Ext: 1  IntID: Implicit  Other  Spare: 0  Preferred  Dchan: 0
>                        ChanSel: B1 channel
                         ]
> [28 05 76 72 62 61 6e]
> Display (len= 5) [ vrban ]
> [6c 04 41 81 31 30]
> Calling Number (len= 6) [ Ext: 0  TON: Subscriber Number (4)  NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1)
>                           Presentation: Presentation permitted, user number passed network screening (1)  '10' ]
> [70 05 c1 31 31 31 35]
> Called Number (len= 7) [ Ext: 1  TON: Subscriber Number (4)  NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1)  '1115' ]
> [a1]
> Sending Complete (len= 1)
q931.c:3211 q931_setup: call 32770 on channel 1 enters state 1 (Call Initiated)
    -- Called g1/1115

< [ 00 81 08 06 08 01 82 07 ]

< Informational frame:
< SAPI: 00  C/R: 0 EA: 0
<  TEI: 064        EA: 1
< N(S): 004   0: 0
< N(R): 003   P: 0
< 4 bytes of data
[May 18 21:11:13] ERROR[14532]: chan_dahdi.c:12173 dahdi_pri_error: dakris in q921_receive SAPI/TEI=0/64 pri->tei:64
[May 18 21:11:13] ERROR[14532]: chan_dahdi.c:12173 dahdi_pri_error: q921_receive ask q921_receive with subchannel for SAPI/TEI=0/64 pri->tei:64
[May 18 21:11:13] ERROR[14532]: chan_dahdi.c:12173 dahdi_pri_error: dakris in q921_receive SAPI/TEI=0/64 pri->tei:64
Handling message for SAPI/TEI=0/64
[May 18 21:11:13] ERROR[14532]: chan_dahdi.c:12173 dahdi_pri_error: in q921_ack_rx
-- ACKing all packets from 2 to (but not including) 3
-- Since there was nothing left, stopping T200 counter
-- Stopping T203 counter since we got an ACK
-- Nothing left, starting T203 counter
< Protocol Discriminator: Q.931 (8)  len=4
< Call Ref: len= 1 (reference 2/0x2) (Terminator)
< Message Type: CONNECT (7)
q931.c:3813 post_handle_q931_message: call 32770 on channel 1 enters state 10 (Active)
[May 18 21:11:13] ERROR[14532]: chan_dahdi.c:12173 dahdi_pri_error: nt_ptmp todo: HACK HACK HACK! i set pri->q921_state = Q921_LINK_CONNECTION_ESTABLISHED, but pri->q921_state is:0
[May 18 21:11:13] ERROR[14532]: chan_dahdi.c:12173 dahdi_pri_error: dakris inside q921_transmit sapi:00 tei:064 pri->dakris_setup:1

> [ 02 81 00 00 08 01 02 0f ]

> Informational frame:
> SAPI: 00  C/R: 1 EA: 0
>  TEI: 064        EA: 1
> N(S): 000   0: 0
> N(R): 000   P: 0
> 4 bytes of data
Stopping T_203 timer
Starting T_200 timer
-- Restarting T200 timer
> Protocol Discriminator: Q.931 (8)  len=4
> Call Ref: len= 1 (reference 2/0x2) (Originator)
> Message Type: CONNECT ACKNOWLEDGE (15)
[May 18 21:11:13] ERROR[14532]: chan_dahdi.c:12173 dahdi_pri_error: 1111113223237680245 NOT! called q921_rr
[May 18 21:11:13] ERROR[14532]: chan_dahdi.c:12173 dahdi_pri_error: 49837947 startet reschedule_t203
-- Restarting T203 timer

< [ 02 81 09 06 ]

< Supervisory frame:
< SAPI: 00  C/R: 1 EA: 0
<  TEI: 064        EA: 1
< Zero: 0     S: 2 01: 1  [ REJ (reject) ]
< N(R): 003 P/F: 0
< 0 bytes of data