NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Null NEW_HANGUP DEBUG: Destroying the call, ourstate Null, peerstate Null -- Got Disconnect from peer. Sending Unnumbered Acknowledgement q921.c:852 q921_reset: q921_state now is Q921_LINK_CONNECTION_RELEASED Sending Set Asynchronous Balanced Mode Extended q921.c:211 q921_send_sabme: q921_state now is Q921_AWAITING_ESTABLISH [Jun 22 14:21:43] NOTICE[12440]: chan_dahdi.c:11105 pri_dchannel: PRI got event: Alarm (4) on Primary D-channel of span 1 [Jun 22 14:21:43] WANING[12444]: chan_dahdi.c:4707 handle_alarms: Detected alarm on channel 1: Red Alarm [Jun 22 14:21:43] WARNING[12444]: chan_dahdi.c:4707 handle_alarms: Detected alarm on channel 2: Red Alarm Sending Set Asynchronous Balanced Mode Extended Sending Set Asynchronous Balanced Mode Extended Sending Set Asynchronous Balanced Mode Extended Sending Set Asynchronous Balanced Mode Extended Sending Set Asynchronous Balanced Mode Extended Sending Set Asynchronous Balanced Mode Extended Sending Set Asynchronous Balanced Mode Extended Sending Set Asynchronous Balanced Mode Extended Sending Set Asynchronous Balanced Mode Extended Sending Set Asynchronous Balanced Mode Extended Sending Set Asynchronous Balanced Mode Extended Sending Set Asynchronous Balanced Mode Extended Sending Set Asynchronous Balanced Mode Extended Sending Set Asynchronous Balanced Mode Extended pbx*CLI> pri intensive debug span 1 Enabled EXTENSIVE debugging on span 1 Sending Set Asynchronous Balanced Mode Extended > [ 00 a5 7f ] > Unnumbered frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 082 EA: 1 > M3: 3 P/F: 1 M2: 3 11: 3 [ SABME (set asynchronous balanced mode extended) ] > 0 bytes of data Sending Set Asynchronous Balanced Mode Extended pbx*CLI> > [ 00 a5 7f ] > Unnumbered frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 082 EA: 1 > M3: 3 P/F: 1 M2: 3 11: 3 [ SABME (set asynchronous balanced mode extended) ] > 0 bytes of data Sending Set Asynchronous Balanced Mode Extended pbx*CLI> > [ 00 a5 7f ] pbx*CLI> > Unnumbered frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 082 EA: 1 > M3: 3 P/F: 1 M2: 3 11: 3 [ SABME (set asynchronous balanced mode extended) ] > 0 bytes of data Sending Set Asynchronous Balanced Mode Extended pbx*CLI> > [ 00 a5 7f ] > Unnumbered frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 082 EA: 1 > M3: 3 P/F: 1 M2: 3 11: 3 [ SABME (set asynchronous balanced mode extended) ] > 0 bytes of data Sending Set Asynchronous Balanced Mode Extended pbx*CLI> > [ 00 a5 7f ] pbx*CLI> > Unnumbered frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 082 EA: 1 > M3: 3 P/F: 1 M2: 3 11: 3 [ SABME (set asynchronous balanced mode extended) ] > 0 bytes of data Sending Set Asynchronous Balanced Mode Extended pbx*CLI> > [ 00 a5 7f ] > Unnumbered frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 082 EA: 1 > M3: 3 P/F: 1 M2: 3 11: 3 [ SABME (set asynchronous balanced mode extended) ] > 0 bytes of data Sending Set Asynchronous Balanced Mode Extended pbx*CLI> > [ 00 a5 7f ] > Unnumbered frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 082 EA: 1 > M3: 3 P/F: 1 M2: 3 11: 3 [ SABME (set asynchronous balanced mode extended) ] > 0 bytes of data Sending Set Asynchronous Balanced Mode Extended pbx*CLI> > [ 00 a5 7f ] > Unnumbered frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 082 EA: 1 > M3: 3 P/F: 1 M2: 3 11: 3 [ SABME (set asynchronous balanced mode extended) ] > 0 bytes of data Sending Set Asynchronous Balanced Mode Extended pbx*CLI> > [ 00 a5 7f ] > Unnumbered frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 082 EA: 1 > M3: 3 P/F: 1 M2: 3 11: 3 [ SABME (set asynchronous balanced mode extended) ] > 0 bytes of data Sending Set Asynchronous Balanced Mode Extended pbx*CLI> > [ 00 a5 7f ] > Unnumbered frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 082 EA: 1 > M3: 3 P/F: 1 M2: 3 11: 3 [ SABME (set asynchronous balanced mode extended) ] > 0 bytes of data Sending Set Asynchronous Balanced Mode Extended pbx*CLI> > [ 00 a5 7f ] > Unnumbered frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 082 EA: 1 > M3: 3 P/F: 1 M2: 3 11: 3 [ SABME (set asynchronous balanced mode extended) ] > 0 bytes of data Sending Set Asynchronous Balanced Mode Extended pbx*CLI> > [ 00 a5 7f ] pbx*CLI> > Unnumbered frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 082 EA: 1 > M3: 3 P/F: 1 M2: 3 11: 3 [ SABME (set asynchronous balanced mode extended) ] > 0 bytes of data Sending Set Asynchronous Balanced Mode Extended pbx*CLI> > [ 00 a5 7f ] > Unnumbered frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 082 EA: 1 > M3: 3 P/F: 1 M2: 3 11: 3 [ SABME (set asynchronous balanced mode extended) ] > 0 bytes of data Sending Set Asynchronous Balanced Mode Extended pbx*CLI> > [ 00 a5 7f ] > Unnumbered frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 082 EA: 1 > M3: 3 P/F: 1 M2: 3 11: 3 [ SABME (set asynchronous balanced mode extended) ] > 0 bytes of data Sending Set Asynchronous Balanced Mode Extended pbx*CLI> > [ 00 a5 7f ] > Unnumbered frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 082 EA: 1 > M3: 3 P/F: 1 M2: 3 11: 3 [ SABME (set asynchronous balanced mode extended) ] > 0 bytes of data Sending Set Asynchronous Balanced Mode Extended pbx*CLI> > [ 00 a5 7f ] > Unnumbered frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 082 EA: 1 > M3: 3 P/F: 1 M2: 3 11: 3 [ SABME (set asynchronous balanced mode extended) ] > 0 bytes of data Sending Set Asynchronous Balanced Mode Extended pbx*CLI> > [ 00 a5 7f ] > Unnumbered frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 082 EA: 1 > M3: 3 P/F: 1 M2: 3 11: 3 [ SABME (set asynchronous balanced mode extended) ] > 0 bytes of data Sending Set Asynchronous Balanced Mode Extended pbx*CLI> > [ 00 a5 7f ] > Unnumbered frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 082 EA: 1 > M3: 3 P/F: 1 M2: 3 11: 3 [ SABME (set asynchronous balanced mode extended) ] > 0 bytes of data Sending Set Asynchronous Balanced Mode Extended pbx*CLI> > [ 00 a5 7f ] > Unnumbered frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 082 EA: 1 > M3: 3 P/F: 1 M2: 3 11: 3 [ SABME (set asynchronous balanced mode extended) ] > 0 bytes of data Sending Set Asynchronous Balanced Mode Extended pbx*CLI> > [ 00 a5 7f ] pbx*CLI> > Unnumbered frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 082 EA: 1 > M3: 3 P/F: 1 M2: 3 11: 3 [ SABME (set asynchronous balanced mode extended) ] > 0 bytes of data Sending Set Asynchronous Balanced Mode Extended pbx*CLI> > [ 00 a5 7f ] > Unnumbered frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 082 EA: 1 > M3: 3 P/F: 1 M2: 3 11: 3 [ SABME (set asynchronous balanced mode extended) ] > 0 bytes of data Sending Set Asynchronous Balanced Mode Extended pbx*CLI> > [ 00 a5 7f ] pbx*CLI> > Unnumbered frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 082 EA: 1 > M3: 3 P/F: 1 M2: 3 11: 3 [ SABME (set asynchronous balanced mode extended) ] > 0 bytes of data Sending Set Asynchronous Balanced Mode Extended pbx*CLI> > [ 00 a5 7f ] pbx*CLI> > Unnumbered frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 082 EA: 1 > M3: 3 P/F: 1 M2: 3 11: 3 [ SABME (set asynchronous balanced mode extended) ] > 0 bytes of data Sending Set Asynchronous Balanced Mode Extended pbx*CLI> > [ 00 a5 7f ] pbx*CLI> > Unnumbered frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 082 EA: 1 > M3: 3 P/F: 1 M2: 3 11: 3 [ SABME (set asynchronous balanced mode extended) ] > 0 bytes of data Sending Set Asynchronous Balanced Mode Extended pbx*CLI> > [ 00 a5 7f ] pbx*CLI> > Unnumbered frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 082 EA: 1 > M3: 3 P/F: 1 M2: 3 11: 3 [ SABME (set asynchronous balanced mode extended) ] > 0 bytes of data Sending Set Asynchronous Balanced Mode Extended pbx*CLI> > [ 00 a5 7f ] pbx*CLI> > Unnumbered frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 082 EA: 1 > M3: 3 P/F: 1 M2: 3 11: 3 [ SABME (set asynchronous balanced mode extended) ] > 0 bytes of data Sending Set Asynchronous Balanced Mode tended pbx*CLI> > [ 00 a5 7f ] pbx*CLI> > Unnumbered frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 082 EA: 1 > M3: 3 P/F: 1 M2: 3 11: 3 [ SABME (set asynchronous balanced mode extended) ] > 0 bytes of data Sending Set Asynchronous Balanced Mode Extended pbx*CLI> > [ 00 a5 7f ] pbx*CLI> > Unnumbered frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 082 EA: 1 > M3: 3 P/F: 1 M2: 3 11: 3 [ SABME (set asynchronous balanced mode extended) ] > 0 bytes of data Sending Set Asynchronous Balanced Mode Extended pbx*CLI> > [ 00 a5 7f ] pbx*CLI> > Unnumbered frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 082 EA: 1 > M3: 3 P/F: 1 M2: 3 11: 3 [ SABME (set asynchronous balanced mode extended) ] > 0 bytes of data Sending Set Asynchronous Balanced Mode Extended pbx*CLI> > [ 00 a5 7f ] pbx*CLI> > Unnumbered frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 082 EA: 1 > M3: 3 P/F: 1 M2: 3 11: 3 [ SABME (set asynchronous balanced mode extended) ] > 0 bytes of data Sending Set Asynchronous Balanced Mode Extended pbx*CLI> > [ 00 a5 7f ] pbx*CLI> > Unnumbered frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 082 EA: 1 > M3: 3 P/F: 1 M2: 3 11: 3 [ SABME (set asynchronous balanced mode extended) ] > 0 bytes of data Sending Set Asynchronous Balanced Mode Extended pbx*CLI> > [ 00 a5 7f ] pbx*CLI> > Unnumbered frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 082 EA: 1 > M3: 3 P/F: 1 M2: 3 11: 3 [ SABME (set asynchronous balanced mode extended) ] > 0 bytes of data Sending Set Asynchronous Balanced Mode Extended pbx*CLI> > [ 00 a5 7f ] pbx*CLI> > Unnumbered frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 082 EA: 1 > M3: 3 P/F: 1 M2: 3 11: 3 [ SABME (set asynchronous balanced mode extended) ] > 0 bytes of data Sending Set Asynchronous Balanced Mode Extended pbx*CLI> > [ 00 a5 7f ] pbx*CLI> > Unnumbered frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 082 EA: 1 > M3: 3 P/F: 1 M2: 3 11: 3 [ SABME (set asynchronous balanced mode extended) ] > 0 bytes of data Sending Set Asynchronous Balanced Mode Extended pbx*CLI> > [ 00 a5 7f ] pbx*CLI> > Unnumbered frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 082 EA: 1 > M3: 3 P/F: 1 M2: 3 11: 3 [ SABME (set asynchronous balanced mode extended) ] > 0 bytes of data Sending Set Asynchronous Balanced Mode Extended pbx*CLI> > [ 00 a5 7f ] pbx*CLI> > Unnumbered frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 082 EA: 1 > M3: 3 P/F: 1 M2: 3 11: 3 [ SABME (set asynchronous balanced mode extended) ] > 0 bytes of data Sending Set Asynchronous Balanced Mode Extended pbx*CLI> > [ 00 a5 7f ] pbx*CLI> > Unnumbered frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 082 EA: 1 > M3: 3 P/F: 1 M2: 3 11: 3 [ SABME (set asynchronous balanced mode extended) ] > 0 bytes of data Sending Set Asynchronous Balanced Mode Extended pbx*CLI> > [ 00 a5 7f ] pbx*CLI> > Unnumbered frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 082 EA: 1 > M3: 3 P/F: 1 M2: 3 11: 3 [ SABME (set asynchronous balanced mode extended) ] > 0 bytes of data Sending Set Asynchronous Balanced Mode Extended pbx*CLI> > [ 00 a5 7f ] pbx*CLI> > Unnumbered frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 082 EA: 1 > M3: 3 P/F: 1 M2: 3 11: 3 [ SABME (set asynchronous balanced mode extended) ] > 0 bytes of data Sending Set Asynchronous Balanced Mode Extended pbx*CLI> > [ 00 a5 7f ] pbx*CLI> > Unnumbered frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 082 EA: 1 > M3: 3 P/F: 1 M2: 3 11: 3 [ SABME (set asynchronous balanced mode extended) ] > 0 bytes of data Sending Set Asynchronous Balanced Mode Extended pbx*CLI> > [ 00 a5 7f ] pbx*CLI> > Unnumbered frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 082 EA: 1 > M3: 3 P/F: 1 M2: 3 11: 3 [ SABME (set asynchronous balanced mode extended) ] > 0 bytes of data Sending Set Asynchronous Balanced Mode Extended pbx*CLI> > [ 00 a5 7f ] pbx*CLI> > Unnumbered frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 082 EA: 1 > M3: 3 P/F: 1 M2: 3 11: 3 [ SABME (set asynchronous balanced mode extended) ] > 0 bytes of data Sending Set Asynchronous Balanced Mode Extended pbx*CLI> > [ 00 a5 7f ] pbx*CLI> > Unnumbered frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 082 EA: 1 > M3: 3 P/F: 1 M2: 3 11: 3 [ SABME (set asynchronous balanced mode extended) ] > 0 bytes of data Sending Set Asynchronous Balanced Mode Extended pbx*CLI> > [ 00 a5 7f ] pbx*CLI> > Unnumbered frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 082 EA: 1 > M3: 3 P/F: 1 M2: 3 11: 3 [ SABME (set asynchronous balanced mode extended) ] > 0 bytes of data Sending Set Asynchronous Balanced Mode Extended pbx*CLI> > [ 00 a5 7f ] pbx*CLI> > Unnumbered frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 082 EA: 1 > M3: 3 P/F: 1 M2: 3 11: 3 [ SABME (set asynchronous balanced mode extended) ] > 0 bytes of data Sending Set Asynchronous Balanced Mode Extended pbx*CLI> > [ 00 a5 7f ] pbx*CLI> > Unnured frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 082 EA: 1 > M3: 3 P/F: 1 M2: 3 11: 3 [ SABME (set asynchronous balanced mode extended) ] > 0 bytes of data Sending Set Asynchronous Balanced Mode Extended pbx*CLI> > [ 00 a5 7f ] pbx*CLI> > Unnumbered frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 082 EA: 1 > M3: 3 P/F: 1 M2: 3 11: 3 [ SABME (set asynchronous balanced mode extended) ] > 0 bytes of data Sending Set Asynchronous Balanced Mode Extended pbx*CLI> > [ 00 a5 7f ] pbx*CLI> > Unnumbered frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 082 EA: 1 > M3: 3 P/F: 1 M2: 3 11: 3 [ SABME (set asynchronous balanced mode extended) ] > 0 bytes of data Sending Set Asynchronous Balanced Mode Extended pbx*CLI> > [ 00 a5 7f ] pbx*CLI> > Unnumbered frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 082 EA: 1 > M3: 3 P/F: 1 M2: 3 11: 3 [ SABME (set asynchronousbalanced mode extended) ] > 0 bytes of data Sending Set Asynchronous Balanced Mode Extended pbx*CLI> > [ 00 a5 7f ] pbx*CLI> > Unnumbered frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 082 EA: 1 > M3: 3 P/F: 1 M2: 3 11: 3 [ SABME (set asynchronous balanced mode extended) ] > 0 bytes of data Sending Set Asynchronous Balanced Mode Extended pbx*CLI> > [ 00 a5 7f ] pbx*CLI> > Unnumbered frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 082 EA: 1 > M3: 3 P/F: 1 M2: 3 11: 3 [ SABME (set asynchronous balanced mode extended) ] > 0 bytes of data Sending Set Asynchronous Balanced Mode Extended pbx*CLI> > [ 00 a5 7f ] pbx*CLI> > Unnumbered frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 082 EA: 1 > M3: 3 P/F: 1 M2: 3 11: 3 [ SABME (set asynchronous balanced mode extended) ] > 0 bytes of data Sending Set Asynchronous Balanced Mode Extended pbx*CLI> > [ 00 a5 7f ] pbx*CLI> > Unnumbered frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 082 EA: 1 > M3: 3 P/F: 1 M2: 3 11: 3 [ SABME (set asynchronous balanced mode extended) ] > 0 bytes of data . . . . This keeps on going until I make inbound call to that BRI . . . Sending Set Asynchronous Balanced Mode Extended pbx*CLI> > [ 00 a5 7f ] pbx*CLI> > Unnumbered frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 082 EA: 1 > M3: 3 P/F: 1 M2: 3 11: 3 [ SABME (set asynchronous balanced mode extended) ] > 0 bytes of data Sending Set Asynchronous Balanced Mode Extended pbx*CLI> > [ 00 a5 7f ] pbx*CLI> > Unnumbered frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 082 EA: 1 > M3: 3 P/F: 1 M2: 3 11: 3 [ SABME (set asynchronous balanced mode extended) ] > 0 bytes of data pbx*CLI> < [ 02 ff 03 08 01 37 05 a1 04 03 80 90 a3 18 01 89 6c 0b 21 81 31 31 32 30 31 36 37 30 30 70 05 81 38 32 34 38 ] pbx*CLI> < Unnumbered frame: < SAPI: 00 C/R: 1 EA: 0 < TEI: 127 EA: 1 < M3: 0 P/F: 0 M2: 0 11: 3 [ UI (unnumbered information) ] < 33 bytes of data Handling message for SAPI/TEI=0/127 < Protocol Discriminator: Q.931 (8) len=33 < Call Ref: len= 1 (reference 55/0x37) (Originator) < Message type: SETUP (5) < [a1]I> < Sending Complete (len= 1) < [04 03 80 90 a3] < Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer capability: Speech 0) < Ext: 1 Trans mode/rate: 64kbps, circuit-mode (16) < User information layer 1: A-Law (35) < [18 01 89] < Channel ID (len= 3) [ Ext: 1 IntID: Implicit Other Spare: 0 Exclusive Dchan: 0 < ChanSel: B1 channel ] < [6c 0b 21 81 31 31 32 30 31 36 37 30 30] < Calling Number (len=13) [ Ext: 0 TON: National Number (2) NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1) < Presentation: Presentation permitted, user number passed network screening (1) '112016700' ] < [70 05 81 38 32 34 38] < Called Number (len= 7) [ Ext: 1 TON: Unknown Number Type (0) NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1) '8248' ] -- Making new call for cr 55 -- Processing Q.931 Call Setup -- Processing IE 161 (cs0, Sending Complete) -- Processing IE 4 (cs0, Bearer Capability) -- Processing IE 24 (cs0, Channel Identification) -- Processing IE 108 (cs0, Calling Party Number) -- Processing IE 112 (cs0, Called Party Number) q931.c:3566 q931_receive: call 55 on channel 1 enters state 6 (Call Present) -- Restarting T203 timer == Primary D-Channel on span 1 up q931.c:2818 q931_call_proceeding: call 55 on channel 1 enters state 9 (Incoming Call Proceeding) Stopping T_203 timer > Protocol Discriminator: Q.931 (8) len=7 > Call Ref: len= 1 (reference 55/0x37) (Terminator) > Message type: CALL PROCEEDING (2) > [18 01 89] > Channel ID (len= 3) [ Ext: 1 IntID: Implicit Other Spare: 0 Exclusive Dchan: 0 > ChanSel: B1 channel ] -- Executing [8248@from-pstn:1] Goto("DAHDI/1-1", "extensions,100,1") in new stack -- Goto (extensions,100,1) -- Executing [100@extensions:1] Dial("DAHDI/1-1", "SIP/100,,ctT") in new stack == Using SIP RTP CoS mark 5 -- Called 100 -- Accepting call from '0112016700' to '8248' on channel 0/1, span 1 -- SIP/100-0820f278 is ringing q931.c:2846 q931_alerting: call 55 on channel 1 enters state 7 (Call Received) > Protocol Discriminator: Q.931 (8) len=8 > Call Ref: len= 1 (reference 55/0x37) (Terminator) > Message type: ALERTING (1) > [1e 02 81 88] > Progress Indicator (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location: Private network serving the local user (1) > Ext: 1 Progress Description: Inband information or appropriate pattern now available. (8) ] pbx*CLI> < [ 00 8d 73 ] pbx*CLI> < Unnumbered frame: < SAPI: 00 C/R: 0 EA: 0 < TEI: 070 EA: 1 < M3: 3 P/F: 1 M2: 0 11: 3 [ UA (unnumbered acknowledgement) ] < 0 bytes of data pbx*CLI> < [ 00 97 73 ] pbx*CLI> < Unnumbered frame: < SAPI: 00 C/R: 0 EA: 0 < TEI: 075 EA: 1 < M3: 3 P/F: 1 M2: 0 11: 3 [ UA (unnumbered acknowledgement) ] < 0 bytes of data pbx*CLI> < [ 00 91 73 ] pbx*CLI> < Unnumbered frame: < SAPI: 00 C/R: 0 EA: 0 < TEI: 072 EA: 1 < M3: 3 P/F: 1 M2: 0 11: 3 [ UA (unnumbered acknowledgement) ] < 0 bytes of data pbx*CLI> < [ 00 93 73 ] pbx*CLI> < Unnumbered frame: < SAPI: 00 C/R: 0 EA: 0 < TEI: 073 EA: 1 < M3: 3 P/F: 1 M2: 0 11: 3 [ UA (unnumbered acknowledgement) ] < 0 bytes of data pbx*CLI> < [ 00 8d 01 02 ] pbx*CLI> < Supervisory frame: < SAPI: 00 C/R: 0 EA: 0 < TEI: 070 EA: 1 < Zero: 0 S: 0 01: 1 [ RR (receive ready) ] < N(R): 001 P/F: 0 < 0 bytes of data pbx*CLI> < [ 00 97 01 02 ] pbx*CLI> < Supervisory frame: < SAPI: 00 C/R: 0 EA: 0 < TEI: 075 EA: 1 < Zero: 0 S: 0 01: 1 [ RR (receive ready) ] < N(R): 001 P/F: 0 < 0 bytes of data pbx*CLI> < [ 00 91 01 02 ] pbx*CLI> < Supervisory frame: < SAPI: 00 C/R: 0 EA: 0 < TEI: 072 EA: 1 < Zero: 0 S: 0 01: 1 [ RR (receive ready) ] < N(R): 001 P/F: 0 < 0 bytes of data pbx*CLI> < [ 00 9302 ] < Supervisory frame: < SAPI: 00 C/R: 0 EA: 0 < TEI: 073 EA: 1 < Zero: 0 S: 0 01: 1 [ RR (receive ready) ] < N(R): 001 P/F: 0 < 0 bytes of data [Jun 22 14:33:04] NOTICE[12444]: chan_dahdi.c:8255 handle_init_event: Alarm cleared on channel 2 [Jun 22 14:33:04] NOTICE[17844]: chan_dahdi.c:5198 dahdi_handle_event: Alarm cleared on channel 1 [Jun 22 14:33:04] NOTICE[12440]: chan_dahdi.c:11105 pri_dchannel: PRI got event: No more alarm (5) on Primary D-channel of span 1 q921.c:852 q921_reset: q921_state now is Q921_LINK_CONNECTION_RELEASED [Jun 22 14:33:04] ERROR[12440]: chan_dahdi.c:10813 dahdi_pri_error: Cannot request TEI while its already assigned Sending Set Asynchronous Balanced Mode Extended pbx*CLI> > [ 00 a5 7f ] pbx*CLI> > Unnumbered frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 082 EA: 1 > M3: 3 P/F: 1 M2: 3 11: 3 [ SABME (set asynchronous balanced mode extended) ] > 0 bytes of data pbx*CLI> < [ 00 a5 73 ] pbx*CLI> < Unnumbered frame: < SAPI: 00 C/R: 0 EA: 0 < TEI: 082 EA: 1 < M3: 3 P/F: 1 M2: 0 11: 3 [ UA (unnumbered acknowledgement) ] < 0 bytes of data Handling message for SAPI/TEI=0/82 -- Got UA from network peer Link up. q921.c:801 q921_dchannel_up: q921_state now is Q921_LINK_CONNECTION_ESTABLISHED -- Finally transmitting 0, since window opened up (0) pbx*CLI> > [ 00 a5 00 00 08 01 b7 02 18 01 89 ] pbx*CLI> > Informational frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 082 EA: 1 > N(S): 000 0: 0 > N(R): 000 P: 0 > 7 bytes of data -- Finally transmitting 1, since window opened up (1) pbx*CLI> > [ 00 a5 02 00 08 01 b7 01 1e 02 81 88 ] pbx*CLI> > Informational frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 082 EA: 1 > N(S): 001 0: 0 > N(R): 000 P: 0 > 8 bytes of data -- Restarting T203 timer pbx*CLI> < [ 00 a5 01 02 ] pbx*CLI> < Supervisory frame: < SAPI: 00 C/R: 0 EA: 0 < TEI: 082 EA: 1 < Zero: 0 S: 0 01: 1 [ RR (receive ready) ] < N(R): 001 P/F: 0 < 0 bytes of data Handling message for SAPI/TEI=0/82 -- ACKing all packets from 0 to (but not including) 1 -- ACKing packet 0, new txqueue is 1 (-1 means empty) -- Stopping T203 counter since we got an ACK -- Waiting for acknowledge, restarting T200 counter -- Restarting T200 timer -- Restarting T203 timer pbx*CLI> < [ 00 a5 01 04 ] pbx*CLI> < Supervisory frame: < SAPI: 00 C/R: 0 EA: 0 < TEI: 082 EA: 1 < Zero: 0 S: 0 01: 1 [ RR (receive ready) ] < N(R): 002 P/F: 0 < 0 bytes of data Handling message for SAPI/TEI=0/82 -- ACKing all packets from 0 to (but not including) 2 -- ACKing packet 1, new txqueue is -1 (-1 means empty) -- Since there was nothing left, stopping T200 counter -- Stopping T203 counter since we got an ACK -- Nothing left, starting T203 counter -- Restarting T203 timer pbx*CLI> < [ 02 8d 00 02 08 01 37 4d 08 02 85 90 ] pbx*CLI> < Informational frame: < SAPI: 00 C/R: 1 EA: 0 < TEI: 070 EA: 1 < N(S): 000 0: 0 < N(R): 001 P: 0 < 8 bytes of data pbx*CLI> < [ 02 97 00 02 08 01 37 4d 08 02 85 90 ] pbx*CLI> < Informational frame: < SAPI: 00 C/R: 1 EA: 0 < TEI: 075 EA: 1 < N(S): 000 0: 0 < N(R): 001 P: 0 < 8 bytes of data pbx*CLI> < [ 02 a5 00 04 08 01 37 4d 08 02 85 90 ] pbx*CLI> < Informational frame: < SAPI: 00 C/R: 1 EA: 0 < TEI: 082 EA: 1 < N(S): 000 0: 0 < N(R): 002 P: 0 < 8 bytes of data Handling message for SAPI/TEI=0/82 -- ACKing all packets from 1 to (but not including) 2 -- Since there was nothing left, stopping T200 counter -- Stopping T203 counter since we got an ACK -- Nothing left, starting T203 counter < Protocol Discriminator: Q.931 (8) len=8 < Call Ref: len= 1 (reference 55/0x37) (Originator) < Message type: RELEASE (77) < [08 02 85 90] < Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0 Location: Private network serving the remote user (5) < Ext: 1 Cause: Normal Clearing (16), class = Normal Event (1) ] -- Processing IE 8 (cs0, Cause) q931.c:3819 q931_receive: call 55 on channel 1 enters state 0 (Null) Sending Receiver Ready (1) pbx*CLI> > [ 02 a5 01 02 ] pbx*CLI> > Supervisory frame: > SAPI: 00 C/R: 1 EA: 0 > TEI: 082 EA: 1 > Zero: 0 S: 0 01: 1 [ RR (receive ready) ] > N(R): 001 P/F: 0 > 0 bytes of data -- Restarting T203 timer -- Channel 0/1, span 1 got hangup, cause 16 == Spawn extension (extensions, 100, 1) exited non-zero on 'DAHDI/1-1' NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Release Request > [ 00 a5 04 02 08 01 b7 5a 08 02 81 90 ] > Informational frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 082 EA: 1 > N(S): 002 0: 0 > N(R): 001 P: 0 > 8 bytes of data Stopping T_203 timer Starting T_200 timer -- Restarting T200 timer > Protocol Discriminator: Q.931 (8) len=8 > Call Ref: len= 1 (reference 55/0x37) (Terminator) > Message type: RELEASE COMPLETE (90) > [08 02 81 90] > Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0 Location: Private network serving the local user (1) > Ext: 1 Cause: Normal Clearing (16), class = Normal Event (1) ] NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Null NEW_HANGUP DEBUG: Destroying the call, ourstate Null, peerstate Null -- Hungup 'DAHDI/1-1' < [ 00 8d 01 04 ] < Supervisory frame: < SAPI: 00 C/R: 0 EA: 0 < TEI: 070 EA: 1 < Zero: 0 S: 0 01: 1 [ RR (receive ready) ] < N(R): 002 P/F: 0 < 0 bytes of data pbx*CLI> < [ 02 a5 00 05 08 01 37 4d 08 02 85 90 ] pbx*CLI> < Informational frame: < SAPI: 00 C/R: 1 EA: 0 < TEI: 082 EA: 1 < N(S): 000 0: 0 < N(R): 002 P: 1 < 8 bytes of data Handling message for SAPI/TEI=0/82 Sending Reject (1) > [ 02 a5 09 03 ] > Supervisory frame: > SAPI: 00 C/R: 1 EA: 0 > TEI: 082 EA: 1 > Zero: 0 S: 2 01: 1 [ REJ (reject) ] > N(R): 001 P/F: 1 > 0 bytes of data -- Restarting T203 timer -- T200 counter expired, What to o... -- Retransmitting 12 bytes pbx*CLI> > [ 00 a5 04 03 08 01 b7 5a 08 02 81 90 ] pbx*CLI> > Informational frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 082 EA: 1 > N(S): 002 0: 0 > N(R): 001 P: 1 > 8 bytes of data -- Rescheduling retransmission (1) pbx*CLI> < [ 02 97 00 03 08 01 37 4d 08 02 850 ] pbx*CLI> < Informational frame: < SAPI: 00 C/R: 1 EA: 0 < TEI: 075 EA: 1 < N(S): 000 0: 0 < N(R): 001 P: 1 < 8 bytes of data pbx*C> < [ 02 a5 02 04 08 01 37 7d 08 02 82 e5 14 01 13 ] pbx*CLI> < Informational frame: < SAPI: 00 C/R: 1 EA: 0 < TEI: 082 EA: 1 < N(S): 001 0: 0 < N(R): 002 P: 0 < 11 bytes of data Handling message for SAPI/TEI=0/82 -- ACKing all packets from 1 to (but not including) 2 -- Stopping T203 counter se we got an ACK -- Waiting for acknowledge, restarting T200 counter -- Restarting T200 timer Sending Receiver Ready (2) pbx*CLI> > [ 02 a5 01 04 ] pbx*CLI> > Supervisory frame: > SAPI: 00 C/R: 1 EA: 0 > TEI: 082 EA: 1 > Zero: 0 S: 0 01: 1 [ RR (receive ready) ] > N(R): 002 P/F: 0 > 0 bytes of data < Protocol Discriminator: Q.931 (8) len=11 < Call Ref: len= 1 (reference 55/0x37) (Originator) < Message type: STATUS (125) < [08 02 82 e5] < Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0 Location: Public network serving the local user (2) < Ext: 1 Cause: Message not compatible with call state (101), class = Protocol Error (e.g. unknown message) (6) ] < [14 01 13] < Call State (len= 3) [ Ext: 0 Coding: CCITT (ITU) standard (0) Call state: Release Request (19) -- Making new call for cr 55 -- Processing I 8 (cs0, Cause) -- Processing IE 20 (cs0, Call State) Starting T_200 timer -- Restarting T200 timer > Protocol Discriminator: Q.931 (8) len=8 > Call Ref: len= 1 (reference 55/0x37) (Terminator) > Message type: RELEASE COMPLETE (90) > [08 02 81 e5] > Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0 Location: Private network serving the local user (1) > Ext: 1 Cause: Message not compatible with call state (101), class = Protocol Error (e.g. unknown message) (6) ] NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Null NEW_HANGUP DEBUG: Destroying the call, ourstate Null, peerstate Null -- Restarting T203 timer pbx*CLI> < [ 00 a5 01 07 ] pbx*CLI> < Supervisory frame: < SAPI: 00 C/R: 0 EA: 0 < TEI: 082 EA: 1 < Zero: 0 S: 0 01: 1 [ RR (receive ready) ] < N(R): 003 P/F: 1 < 0 bytes of data Handling message for SAPI/TEI=0/82 -- ACKing all packets from 1 to (but not including) 3 -- ACKing packet 2, new txqueue is 3 (-1 means empty) -- Stopping T203 counter since we got an ACK -- Finally transmitting 3, since window opened up (0) pbx*CLI> > [ 00 a5 06 04 08 01 b7 5a 08 02 81 e5 ] pbx*CLI> > Informational frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 082 EA: 1 > N(S): 003 0: 0 > N(R): 002 P: 0 > 8 bytes of data -- Waiting for acknowledge, restarting T200 counter -- Restarting T200 timer -- Got RR response to our frame -- Restarting T203 timer pbx*CLI> < [ 00 a5 01 08 ] pbx*CLI> < Supervisory frame: < SAPI: 00 C/R: 0 EA: 0 < TEI: 082 EA: 1 < Zero: 0 S: 0 01: 1 [ RR (receive ready) ] < N(R): 004 P/F: 0 < 0 bytes of data Handling message for SAPI/TEI=0/82 pbx*CLI>-- ACKing all packets from 2 to (but not including) 4 -- ACKing packet 3, new txqueue is -1 (-1 means empty) -- Since there was nothing left, stopping T200 counter -- Stopping T203 counter since we got an ACK -- Nothing left, starting T203 counter -- Restarting T203 timer pbx*CLI> < [ fe ff 03 0f 00 00 04 ff ] pbx*CLI> < Unnumbered frame: < SAPI: 63 C/R: 1 EA: 0 < TEI: 127 EA: 1 < M3: 0 P/F: 0 M2: 0 11: 3 [ UI (unnumbered information) ] < 5 bytes of data < MDL Message: TEI Identity Check Request (4) < RI: 0 < Ai: 127 E:1 Handling message for SAPI/TEI=63/127 Received MDL message Sending TEI management message 5, TEI=82 > [ fc ff 03 0f da b1 05 a5 ] > Unnumbered frame: > SPI: 63 C/R: 0 EA: 0 > TEI: 127 EA: 1 > M3: 0 P/F: 0 M2: 0 11: 3 [ UI (unnumbered information) ] > 5 bytes of data > MDL Message: TEI Identity Check Response (5) > RI: 55985 > Ai: 82 E:1 -- Restarting T203 timer pbx*CLI> < [ 02 97 00 03 08 01 37 4d 08 02 85 90 ] pbx*CLI> < Informational frame: < SAPI: 00 C/R: 1 EA: 0 < TEI: 075 EA: 1 < N(S): 000 0: 0 < N(R): 001 P: 1 < 8 bytes of data pbx*CLI> < [ 00 97 01 04 ] pbx*CLI> < Supervisory frame: < SAPI: 00 C/R: 0 EA: 0 < TEI: 075 EA: 1 < Zero: 0 S: 0 01: 1 [ RR (receive ready) ] < N(R): 002 P/F: 0 < 0 bytes of data pbx*CLI> pri < [ 02 8d 53 ] pbx*CLI> pri < Unnumbered frame: < SAPI: 00 C/R: 1 EA: 0 < TEI: 070 EA: 1 < M3: 2 P/F: 1 M2: 0 11: 3 [ DISC (disconnect) ] < 0 bytes of data pbx*CLI> pri < [ 02 97 53 ] pbx*CLI> pri < Unnumbered frame: < SAPI: 00 C/R: 1 EA: 0 < TEI: 075 EA: 1 < M3: 2 P/F: 1 M2: 0 11: 3 [ DISC (disconnect) ] < 0 bytes of data pbx*CLI> pri < [ 02 a5 53 ] pbx*CLI> pri < Unnumbered fr: < SAPI: 00 C/R: 1 EA: 0 < TEI: 082 EA: 1 < M3: 2 P/F: 1 M2: 0 11: 3 [ DISC (disconnect) ] < 0 bytes of data Handling message for SAPI/TEI=0/82 -- Got Disconnect from peer. Sending Unnumbered Acknowledgement pbx*CLI> pri > [ 02 a5 73 ] pbx*CLI> pri > Unnumbered frame: > SAPI: 00 C/R: 1 EA: 0 > TEI: 082 EA: 1 > M3: 3 P/F: 1 M2: 0 11: 3 [ UA (unnumbered acknowledgement) ] > 0 bytes of data q921.c:852 q921_reset: q921_state now is Q921_LINK_CONNECTION_RELEASED -- Restarting T203 timer pbx*CLI> pri < [ 02 91 53 ] pbx*CLI> pri < Unnumbered frame: < SAPI: 00 C/R: 1 EA: 0 < TEI: 072 EA: 1 < M3: 2 P/F: 1 M2: 0 11: 3 [ DISC (disconnect) ] < 0 bytes of data pbx*CLI> pri < [ 02 93 53 ] pbx*CLI> pri < Unnumbered frame: < SAPI: 00 C/R: 1 EA: 0 < TEI: 073 EA: 1 < M3: 2 P/F: 1 M2: 0 11: 3 [ DISC (disconnect) ] < 0 bytes of data Sending Set Asynchronous Balanced Mode Extended pbx*CLI> pri > [ 00 a5 7f ] pbx*CLI> pri > Unnumbered frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 082 EA: 1 > M3: 3 P/F: 1 M2: 3 11: 3 [ SABME (set asynchronous balanced mode extended) ] > 0 bytes of data q921.c:211 q921_send_sabme: q921_state now is Q921_AWAITING_ESTABLISH pbx*CLI> pri < [ 02 93 53 ] pbx*CLI> pri < Unnumbered frame: < SAPI: 00 C/R: 1 EA: 0 < TEI: 073 EA: 1 < M3: 2 P/F: 1 M2: 0 11: 3 [ DISC (disconnect) ] < 0 bytes of data pbx*CLI> pri < [ 02 a5 53 ] pbx*CLI> pri < Unnumbered frame: < SAPI: 00 C/R: 1 EA: 0 < TEI: 082 EA: 1 < M3: 2 P/F: 1 M2: 0 11: 3 [ DISC (disconnect) ] < 0 bytes of data Handling message for SAPI/TEI=0/82 -- Got Disconnect from peer. Sending Unnumbered Acknowledgement pbx*CLI> pri > [ 02 a5 73 ] pbx*CLI> pri > Unnumbered frame: > SAPI: 00 C/R: 1 EA: 0 > TEI: 082 EA: 1 > M3: 3 P/F: 1 M2: 0 11: 3 [ UA (unnumbered acknowledgement) ] > 0 bytes of data q921.c:852 q921_reset: q921_state now is Q921_LINK_CONNECTION_RELEASED -- Restarting T203 timer pbx*CLI> pri < [ 02 91 53 ] pbx*CLI> pri < Unnumbered frame: < SAPI: 00 C/R: 1 EA: 0 < TEI: 072 EA: 1 < M3: 2 P/F: 1 M2: 0 11: 3 [ DISC (disconnect) ] < 0 bytes of data pbx*CLI> pri < [ 02 97 53 ] pbx*CLI> pri < Unnumbered frame: < SAPI: 00 C/R: 1 EA: 0 < TEI: 075 EA: 1 < M3: 2 P/F: 1 M2: 0 11: 3 [ DISC (disconnect) ] < 0 bytes of data pbx*CLI> pri < [ 00 a5 1f ] pbx*CLI> pri < Unnumbered frame: < SAPI: 00 C/R: 0 EA: 0 < TEI: 082 EA: 1 < M3: 0 P/F: 1 M2: 3 11: 3 [ DM (disconnect mode) ] < 0 bytes of data Handling message for SAPI/TEI=0/82 -- Got DM Mode from peer. -- Restarting T203 timer pbx*CLI> pri debug < [ 00 91 73 ] pbx*CLI> pri debug < Unnumbered frame: < SAPI: 00 C/R: 0 EA: 0 < TEI: 072 EA: 1 < M3: 3 P/F: 1 M2: 0 11: 3 [ UA (unnumbered acknowledgement) ] < 0 bytes of data Sending Set Asynchronous Balanced Mode Extended pbx*CLI> pri debug > [ 00 a5 7f ] > Unnumbered frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 082 EA: 1 > M3: 3 P/F: 1 M2: 3 11: 3 [ SABME (set asynchronous balanced mode extended) ] > 0 bytes of data q921.c:211 q921_send_sabme: q921_state now is Q921_AWAITING_ESTABLISH pbx*CLI> pri debug < [ 02 a5 53 ] pbx*CLI> pri debug < Unnumbered frame: < SAPI: 00 C/R: 1 EA: 0 < TEI: 082 EA: 1 < M3: 2 P/F: 1 M2: 0 11: 3 [ DISC (disconnect) ] < 0 bytes of data Handling message for SAPI/TEI=0/82 -- Got Disconnect from peer. Sending Unnumbered Acknowledgement pbx*CLI> pri debug > [ 02 a5 73 ] pbx*CLI> pri debug > Unnumbered frame: > SAPI: 00 C/R: 1 EA: 0 > TEI: 082 EA: 1 > M3: 3 P/F: 1 M2: 0 11: 3 [ UA (unnumbered acknowledgement) ] > 0 bytes of data q921.c:852 q921_reset: q921_state now is Q921_LINK_CONNECTION_RELEASED -- Restarting T203 timer pbx*CLI> pri debug < [ 02 91 53 ] pbx*CLI> pri debug < Unnumbered frame: < SAPI: 00 C/R: 1EA: 0 < TEI: 072 EA: 1 < M3: 2 P/F: 1 M2: 0 11: 3 [ DISC (disconnect) ] < 0 bytes of data pbx*CLI> pri debug < [ 02 97 53 ] pbx*CLI> pri debug < Unnumbered frame: < SAPI: 00 C/R: 1 EA: 0 < TEI: 075 EA: 1 < M3: 2 P/F: 1 M2: 0 11: 3 [ DISC (disconnect) ] < 0 bytes of data pbx*CLI> pri debug < [ 00 a5 1f ] pbx*CLI> pri debug < Unnumbered frame: < SAPI: 00 C/R: 0 EA: 0 < TEI: 082 EA: 1 < M3: 0 P/F: 1 M2: 3 11: 3 [ DM (disconnect mode) ] < 0 bytes of data Handling message for SAPI/TEI=0/82 -- Got DM Mode from peer. -- Restarting T203 timer Sending Set Asynchronous Balanced Mode Extended pbx*CLI> pri debug > [ 00 a5 7f ] > Unnumbered frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 082 EA: 1 > M3: 3 P/F: 1 M2: 3 11: 3 [ SABME (set asynchronous balanced mode extended) ] > 0 bytes of data q921.c:211 q921_send_sabme: q921_state now is Q921_AWAITING_ESTABLISH pbx*CLI> pri debug < [ 02 91 53 ] pbx*CLI> pri debug < Unnumbered frame: < SAPI: 00 C/R: 1 EA: 0 < TEI: 072 EA: 1 < M3: 2 P/F: 1 M2: 0 11: 3 [ DISC (disconnect) ] < 0 bytes of data pbx*CLI> pri debug < [ 02 97 53 ] pbx*CLI> pri debug < Unnumbered frame: < SAPI: 00 C/R: 1 EA: 0 < TEI: 075 EA: 1 < M3: 2 P/F: 1 M2: 0 11: 3 [ DISC (disconect) ] < 0 bytes of data pbx*CLI> pri debug < [ 00 a5 73 ] pbx*CLI> pri debug < Unnumbered frame: < SAPI: 00 C/R: 0 EA: 0 < TEI: 082 EA: 1 < M3: 3 P/F: 1 M2: 0 11: 3 [ UA (unnumbered acknowledgement) ] < 0 bytes of data Handling message for SAPI/TEI=0/82 -- Got UA from network peer Link up. q921.c:801 q921_dchannel_up: q921_state now is Q921_LINK_CONNECTION_ESTABLISHED -- Restarting T203 timer pbx*CLI> pri debug < [ fe ff 03 0f 00 00 04 97 ] pbx*CLI> pri debug < Unnumbered frame: < SAPI: 63 C/R: 1 EA: 0 < TEI: 127 EA: 1 < M3: 0 P/F: 0 M2: 0 11: 3 [ UI (unnumbered information) ] < 5 bytes of data < MDL Message: TEI Identity Check Request (4) < RI: 0 < Ai: 75 E:1 Handling message for SAPI/TEI=63/127 Received MDL message -- Restarting T203 timer pbx*CLI> pri debug < [ 00 97 1f ] pbx*CLI> pri debug < Unnumbered frame: < SAPI: 00 C/R: 0 EA: 0 < TEI: 075 EA: 1 < M3: 0 P/F: 1 M2: 3 11: 3 [ DM (disconnect mode) ] < 0 bytes of data pbx*CLI> pri debug < [ fe ff 03 0f 00 00 04 97 ] pbx*CLI> pri debug < Unnumbered frame: < SAPI: 63 C/R: 1 EA: 0 < TEI: 127 EA: 1 < M3: 0 P/F: 0 M2: 0 11: 3 [ UI (unnumbered information) ] < 5 bytes of data < MDL Message: TEI Identity Check Request (4) < RI: 0 < Ai: 75 E:1 Handling message for SAPI/TEI=63/127 Received MDL message -- Restarting T203 timer T203 counter expired, sending RR and scheduling T203 again Sending Receiver Ready (0) > [ 00 a5 01 01 ] > Supervisory frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 082 EA: 1 > Zero: 0 S: 0 01: 1 [ RR (receive ready) ] > N(R): 000 P/F: 1 > 0 bytes of data pbx*CLI> pri debug < [ 00 a5 01 01 ] pbx*CLI> pri debug < Supervisory frame: < SAPI: 00 C/R: 0 EA: 0 < TEI: 082 EA: 1 < Zero: 0 S: 0 01: 1 [ RR (receive ready) ] < N(R): 000 P/F: 1 < 0 bytes of data Handling message for SAPI/TEI=0/82 -- ACKing all packets from 0 to (but not including) 0 -- Since there was nothing left, stopping T200 counter -- Stopping T203 counter since wegot an ACK -- Nothing left, starting T203 counter -- Got RR response to our frame -- Restarting T203 timer T203 counter expired, sending RR and scheduling T203 again Sending Receiver Ready (0) > [ 00 a5 01 01 ] > Supervisory frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 082 EA: 1 > Zero: 0 S: 0 01: 1 [ RR (receive ready) ] > N(R): 000 P/F: 1 > 0 bytes of data pbx*CLI> pri debug < [ 00 a5 01 01 ] pbx*CLI> pri debug < Supervisory frame: < SAPI: 00 C/R: 0 EA: 0 < TEI: 082 EA: < Zero: 0 S: 0 01: 1 [ RR (receive ready) ] < N(R): 000 P/F: 1 < 0 bytes of data Handling message for SAPI/TEI=0/82 --ACKing all packets from 0 to (but not including) 0 -- Since there was nothing left, stopping T200 counter -- Stopping T203 counter since we got an ACK -- Nothing left, starting T203 counter -- Got RR response to our frame -- Restarting T203 timer T203 counter expired in weird state 0 pbx*CLI> pri debug span 1 Enabled debugging on span 1 Received MDL message Sending TEI management message 5, TEI=82 pbx*CLI>