#####  Complements Debug Concole: ##### 

[Aug 24 02:18:11] DEBUG[28324]: chan_zap.c:1152 zt_r2_write_log: Chan 49 - calling callback on chan 49
[Aug 24 02:18:11] WARNING[28324]: chan_zap.c:1143 zt_r2_write_log: Chan 49 - Seize Timeout Expired!
[Aug 24 02:18:11] ERROR[28324]: chan_zap.c:1146 zt_r2_write_log: Chan 49 - Protocol error. Reason = Seize Timeout, R2 State = Seize Transmitted, MF state = MF Engine Off, MF Group = Forward MF init
[Aug 24 02:18:11] DEBUG[28324]: chan_zap.c:1152 zt_r2_write_log: Chan 49 - DNIS = 276, ANI = , Last MF Signal =
[Aug 24 02:18:11] DEBUG[28324]: chan_zap.c:1152 zt_r2_write_log: Chan 49 - ABCD Tx >> [IDLE] 0x08
[Aug 24 02:18:11] DEBUG[28324]: chan_zap.c:1152 zt_r2_write_log: Chan 49 - ABCD Raw Tx >> 0x09
[Aug 24 02:18:11] ERROR[28324]: chan_zap.c:959 zt_r2_on_protocol_error: MFC/R2 protocol error on chan 49: Seize Timeout
[Aug 24 02:18:11] DEBUG[28324]: chan_zap.c:3005 zt_hangup: disconnecting MFC/R2 call on chan 49
    -- Hungup 'Zap/49-1'
    -- Executing [failed@rec-r2:1] Answer("OutgoingSpoolFailed", "") in new stack
  == Spawn extension (rec-r2, failed, 1) exited non-zero on 'OutgoingSpoolFailed'
    -- Executing [h@rec-r2:1] Hangup("OutgoingSpoolFailed", "") in new stack
  == Spawn extension (rec-r2, h, 1) exited non-zero on 'OutgoingSpoolFailed'
[Aug 24 02:18:11] DEBUG[28324]: chan_zap.c:918 zt_r2_get_channel_category: no MFC/R2 category specified for chan Zap/48-1, using default National Subscriber
[Aug 24 02:18:11] DEBUG[28324]: chan_zap.c:1152 zt_r2_write_log: Chan 48 - Attempting to make call (ANI=, DNIS=239, category=National Subscriber)
[Aug 24 02:18:11] DEBUG[28324]: chan_zap.c:1152 zt_r2_write_log: Chan 48 - ABCD Raw Rx << 0x09
[Aug 24 02:18:11] DEBUG[28324]: chan_zap.c:1152 zt_r2_write_log: Chan 48 - No change in bits
[Aug 24 02:18:11] DEBUG[28324]: chan_zap.c:1152 zt_r2_write_log: Chan 48 - Call started at Sun Aug 24 02:18:11 2008 on chan 48
[Aug 24 02:18:11] DEBUG[28324]: chan_zap.c:1152 zt_r2_write_log: Chan 48 - ABCD Tx >> [SEIZE] 0x00
[Aug 24 02:18:11] DEBUG[28324]: chan_zap.c:1152 zt_r2_write_log: Chan 48 - ABCD Raw Tx >> 0x01


##### Sometimes on Channel Hangup i has this error on channels Hangup: ##### 

    -- Executing [h@incoming:1] Hangup("Zap/22-1", "") in new stack
  == Spawn extension (incoming, h, 1) exited non-zero on 'Zap/22-1'
  == End MixMonitor Recording Zap/22-1
[Aug 24 01:48:11] DEBUG[24447]: chan_zap.c:3005 zt_hangup: disconnecting MFC/R2 call on chan 22
[Aug 24 01:48:11] DEBUG[24447]: chan_zap.c:1152 zt_r2_write_log: Chan 22 - Call ended
[Aug 24 01:48:11] DEBUG[24447]: chan_zap.c:1152 zt_r2_write_log: Chan 22 - ABCD Tx >> [IDLE] 0x08
[Aug 24 01:48:11] DEBUG[24447]: chan_zap.c:1152 zt_r2_write_log: Chan 22 - ABCD Raw Tx >> 0x09
[Aug 24 01:48:11] NOTICE[24447]: chan_zap.c:1009 zt_r2_on_call_end: MFC/R2 call end on chan 22
[Aug 24 01:48:11] DEBUG[24447]: chan_zap.c:1021 zt_r2_update_monitor_count: At least one device needs monitoring, let's wake up that lazy bastard.
    -- Hungup 'Zap/22-1'
  == Parsing '/etc/asterisk/manager.conf': Found
[Aug 24 01:48:11] DEBUG[24642]: chan_zap.c:918 zt_r2_get_channel_category: no MFC/R2 category specified for chan Zap/22-1, using default National Subscriber
[Aug 24 01:48:11] DEBUG[24642]: chan_zap.c:1152 zt_r2_write_log: Chan 22 - Attempting to make call (ANI=, DNIS=204, category=National Subscriber)
[Aug 24 01:48:11] DEBUG[24642]: chan_zap.c:1152 zt_r2_write_log: Chan 22 - ABCD Raw Rx << 0x09
[Aug 24 01:48:11] DEBUG[24642]: chan_zap.c:1152 zt_r2_write_log: Chan 22 - No change in bits
[Aug 24 01:48:11] DEBUG[24642]: chan_zap.c:1152 zt_r2_write_log: Chan 22 - Call started at Sun Aug 24 01:48:11 2008 on chan 22
[Aug 24 01:48:11] DEBUG[24642]: chan_zap.c:1152 zt_r2_write_log: Chan 22 - ABCD Tx >> [SEIZE] 0x00
[Aug 24 01:48:11] DEBUG[24642]: chan_zap.c:1152 zt_r2_write_log: Chan 22 - ABCD Raw Tx >> 0x01
[Aug 24 01:48:11] DEBUG[23079]: chan_zap.c:8610 mfcr2_monitor: Alright, back to work!
[Aug 24 01:48:11] DEBUG[23081]: chan_zap.c:1152 zt_r2_write_log: Chan 53 - ABCD Raw Rx << 0x01
[Aug 24 01:48:11] DEBUG[23081]: chan_zap.c:1152 zt_r2_write_log: Chan 53 - Bits changed from 0x04 to 0x00
[Aug 24 01:48:11] DEBUG[23081]: chan_zap.c:1152 zt_r2_write_log: Chan 53 - ABCD Rx << [0x00] 0x00
[Aug 24 01:48:11] ERROR[23081]: chan_zap.c:1146 zt_r2_write_log: Chan 53 - Protocol error. Reason = Invalid CAS, R2 State = Clear Forward Transmitted, MF state = MF Engine Off, MF Group = Forward Group II
[Aug 24 01:48:11] DEBUG[23081]: chan_zap.c:1152 zt_r2_write_log: Chan 53 - DNIS = 80, ANI = , Last MF Signal =
[Aug 24 01:48:11] DEBUG[23081]: chan_zap.c:1152 zt_r2_write_log: Chan 53 - ABCD Tx >> [IDLE] 0x08
[Aug 24 01:48:11] DEBUG[23081]: chan_zap.c:1152 zt_r2_write_log: Chan 53 - ABCD Raw Tx >> 0x09
[Aug 24 01:48:11] ERROR[23081]: chan_zap.c:959 zt_r2_on_protocol_error: MFC/R2 protocol error on chan 53: Invalid CAS

##### Cli Log - Channel 40 ( E1-2 ) calling Channel 9 ( E1-1 ) #####

[Aug 25 10:09:22] DEBUG[3212]: chan_zap.c:8610 mfcr2_monitor: Alright, back to work!
[Aug 25 10:09:22] DEBUG[3214]: chan_zap.c:1152 zt_r2_write_log: Chan 40 - ABCD Raw Rx << 0x09
[Aug 25 10:09:22] DEBUG[3214]: chan_zap.c:1152 zt_r2_write_log: Chan 40 - Bits changed from 0x00 to 0x08
[Aug 25 10:09:22] DEBUG[3214]: chan_zap.c:1152 zt_r2_write_log: Chan 40 - ABCD Rx << [CLEAR FORWARD] 0x08
[Aug 25 10:09:22] DEBUG[3214]: chan_zap.c:1152 zt_r2_write_log: Chan 40 - Call ended
[Aug 25 10:09:22] DEBUG[3214]: chan_zap.c:1152 zt_r2_write_log: Chan 40 - ABCD Tx >> [IDLE] 0x08
[Aug 25 10:09:22] DEBUG[3214]: chan_zap.c:1152 zt_r2_write_log: Chan 40 - ABCD Raw Tx >> 0x09
[Aug 25 10:09:22] NOTICE[3214]: chan_zap.c:1009 zt_r2_on_call_end: MFC/R2 call end on chan 40
[Aug 25 10:09:22] DEBUG[6306]: chan_zap.c:918 zt_r2_get_channel_category: no MFC/R2 category specified for chan Zap/40-1, using default National Subscriber
[Aug 25 10:09:22] DEBUG[6306]: chan_zap.c:1152 zt_r2_write_log: Chan 40 - Attempting to make call (ANI=, DNIS=544, category=National Subscriber)
[Aug 25 10:09:22] DEBUG[6306]: chan_zap.c:1152 zt_r2_write_log: Chan 40 - ABCD Raw Rx << 0x09
[Aug 25 10:09:22] DEBUG[6306]: chan_zap.c:1152 zt_r2_write_log: Chan 40 - No change in bits
[Aug 25 10:09:22] DEBUG[6306]: chan_zap.c:1152 zt_r2_write_log: Chan 40 - ABCD Tx >> [SEIZE] 0x00
[Aug 25 10:09:22] DEBUG[6306]: chan_zap.c:1152 zt_r2_write_log: Chan 40 - ABCD Raw Tx >> 0x01
[Aug 25 10:09:22] DEBUG[3212]: chan_zap.c:1152 zt_r2_write_log: Chan 9 - ABCD Raw Rx << 0x01
[Aug 25 10:09:22] DEBUG[3212]: chan_zap.c:1152 zt_r2_write_log: Chan 9 - Bits changed from 0x0C to 0x00
[Aug 25 10:09:22] DEBUG[3212]: chan_zap.c:1152 zt_r2_write_log: Chan 9 - ABCD Rx << [0x00] 0x00
[Aug 25 10:09:22] ERROR[3212]: chan_zap.c:1146 zt_r2_write_log: Chan 9 - Protocol error. Reason = Invalid CAS, R2 State = Clear Forward Transmitted, MF state = MF Engine Off, MF Group = Forward Group II
[Aug 25 10:09:22] DEBUG[3212]: chan_zap.c:1152 zt_r2_write_log: Chan 9 - DNIS = 566, ANI = , Last MF Signal =
[Aug 25 10:09:22] DEBUG[3212]: chan_zap.c:1152 zt_r2_write_log: Chan 9 - ABCD Tx >> [IDLE] 0x08
[Aug 25 10:09:22] DEBUG[3212]: chan_zap.c:1152 zt_r2_write_log: Chan 9 - ABCD Raw Tx >> 0x09
[Aug 25 10:09:22] ERROR[3212]: chan_zap.c:959 zt_r2_on_protocol_error: MFC/R2 protocol error on chan 9: Invalid CAS
[Aug 25 10:09:22] DEBUG[3214]: chan_zap.c:8608 mfcr2_monitor: No one requires my monitoring services :-(
[Aug 25 10:09:30] DEBUG[6306]: chan_zap.c:1152 zt_r2_write_log: Chan 40 - calling callback on chan 40
[Aug 25 10:09:30] WARNING[6306]: chan_zap.c:1143 zt_r2_write_log: Chan 40 - Seize Timeout Expired!
[Aug 25 10:09:30] ERROR[6306]: chan_zap.c:1146 zt_r2_write_log: Chan 40 - Protocol error. Reason = Seize Timeout, R2 State = Seize Transmitted, MF state = MF Engine Off, MF Group = Forward MF init
[Aug 25 10:09:30] DEBUG[6306]: chan_zap.c:1152 zt_r2_write_log: Chan 40 - DNIS = 544, ANI = , Last MF Signal =
[Aug 25 10:09:30] DEBUG[6306]: chan_zap.c:1152 zt_r2_write_log: Chan 40 - ABCD Tx >> [IDLE] 0x08
[Aug 25 10:09:30] DEBUG[6306]: chan_zap.c:1152 zt_r2_write_log: Chan 40 - ABCD Raw Tx >> 0x09
[Aug 25 10:09:30] ERROR[6306]: chan_zap.c:959 zt_r2_on_protocol_error: MFC/R2 protocol error on chan 40: Seize Timeout
[Aug 25 10:09:30] DEBUG[3212]: chan_zap.c:1152 zt_r2_write_log: Chan 9 - ABCD Raw Rx << 0x09
[Aug 25 10:09:30] DEBUG[3212]: chan_zap.c:1152 zt_r2_write_log: Chan 9 - Bits changed from 0x00 to 0x08
[Aug 25 10:09:30] DEBUG[3212]: chan_zap.c:1152 zt_r2_write_log: Chan 9 - ABCD Rx << [IDLE] 0x08
[Aug 25 10:09:30] NOTICE[3212]: chan_zap.c:1168 zt_r2_on_line_idle: Far end unblocked on chan 9
[Aug 25 10:09:30] DEBUG[6306]: chan_zap.c:3005 zt_hangup: disconnecting MFC/R2 call on chan 40
[Aug 25 10:09:30] DEBUG[6306]: chan_zap.c:1021 zt_r2_update_monitor_count: At least one device needs monitoring, let's wake up that lazy bastard.


##### Call Log File - Channel 40 ( E1-2 ) calling Channel 9 ( E1-1 ) #####

[09:50:38:772] [Thread: 3025005488] [Chan 9] - Call started at Mon Aug 25 09:50:38 2008 on chan 9
[09:50:38:772] [Thread: 3025005488] [Chan 9] - ABCD Tx >> [SEIZE] 0x00
[09:50:38:772] [Thread: 3025005488] [Chan 9] - ABCD Raw Tx >> 0x01
[09:50:38:789] [Thread: 3074022320] [Chan 9] - ABCD Raw Rx << 0x0D
[09:50:38:789] [Thread: 3074022320] [Chan 9] - Bits changed from 0x08 to 0x0C
[09:50:38:789] [Thread: 3074022320] [Chan 9] - ABCD Rx << [SEIZE ACK] 0x0C
[09:50:38:789] [Thread: 3074022320] [Chan 9] - Sending DNIS digit 4
[09:50:38:789] [Thread: 3074022320] [Chan 9] - MF Tx >> 4 [ON]
[09:50:38:852] [Thread: 3025005488] [Chan 9] - MF Rx << 1 [ON]
[09:50:38:852] [Thread: 3025005488] [Chan 9] - MF Tx >> 4 [OFF]
[09:50:38:912] [Thread: 3025005488] [Chan 9] - MF Rx << 1 [OFF]
[09:50:38:912] [Thread: 3025005488] [Chan 9] - Sending DNIS digit 1
[09:50:38:912] [Thread: 3025005488] [Chan 9] - MF Tx >> 1 [ON]
[09:50:38:972] [Thread: 3025005488] [Chan 9] - MF Rx << 1 [ON]
[09:50:38:972] [Thread: 3025005488] [Chan 9] - MF Tx >> 1 [OFF]
[09:50:39:032] [Thread: 3025005488] [Chan 9] - MF Rx << 1 [OFF]
[09:50:39:032] [Thread: 3025005488] [Chan 9] - Sending DNIS digit 2
[09:50:39:032] [Thread: 3025005488] [Chan 9] - MF Tx >> 2 [ON]
[09:50:39:072] [Thread: 3025005488] [Chan 9] - MF Rx << 1 [ON]
[09:50:39:072] [Thread: 3025005488] [Chan 9] - MF Tx >> 2 [OFF]
[09:50:39:132] [Thread: 3025005488] [Chan 9] - MF Rx << 1 [OFF]
[09:50:39:132] [Thread: 3025005488] [Chan 9] - No more DNIS. Doing nothing, waiting for timeout.
[09:50:40:612] [Thread: 3025005488] [Chan 9] - MF Rx << 5 [ON]
[09:50:40:752] [Thread: 3025005488] [Chan 9] - MF Rx << 5 [OFF]
[09:50:40:752] [Thread: 3025005488] [Chan 9] - Sending category National Subscriber
[09:50:40:752] [Thread: 3025005488] [Chan 9] - MF Tx >> 1 [ON]
[09:50:40:812] [Thread: 3025005488] [Chan 9] - MF Rx << 5 [ON]
[09:50:40:812] [Thread: 3025005488] [Chan 9] - MF Tx >> 1 [OFF]
[09:50:40:892] [Thread: 3025005488] [Chan 9] - MF Rx << 5 [OFF]
[09:50:40:892] [Thread: 3025005488] [Chan 9] - Sending more ANI unavailable
[09:50:40:892] [Thread: 3025005488] [Chan 9] - MF Tx >> F [ON]
[09:50:40:952] [Thread: 3025005488] [Chan 9] - MF Rx << 3 [ON]
[09:50:40:952] [Thread: 3025005488] [Chan 9] - MF Tx >> F [OFF]
[09:50:41:012] [Thread: 3025005488] [Chan 9] - MF Rx << 3 [OFF]
[09:50:41:012] [Thread: 3025005488] [Chan 9] - Sending category National Subscriber
[09:50:41:012] [Thread: 3025005488] [Chan 9] - MF Tx >> 1 [ON]
[09:50:41:072] [Thread: 3025005488] [Chan 9] - MF Rx << 1 [ON]
[09:50:41:072] [Thread: 3025005488] [Chan 9] - MF Tx >> 1 [OFF]
[09:50:41:132] [Thread: 3025005488] [Chan 9] - MF Rx << 1 [OFF]
[09:50:41:269] [Thread: 3025005488] [Chan 9] - ABCD Raw Rx << 0x05
[09:50:41:269] [Thread: 3025005488] [Chan 9] - Bits changed from 0x0C to 0x04
[09:50:41:269] [Thread: 3025005488] [Chan 9] - ABCD Rx << [ANSWER] 0x04
[09:57:55:861] [Thread: 3011931056] [Chan 9] - ABCD Raw Rx << 0x0D
[09:57:55:861] [Thread: 3011931056] [Chan 9] - Bits changed from 0x04 to 0x0C
[09:57:55:861] [Thread: 3011931056] [Chan 9] - ABCD Rx << [CLEAR BACK] 0x0C
[09:57:55:861] [Thread: 3011931056] [Chan 9] - Far end disconnected. Reason: Normal Clearing
[09:57:55:877] [Thread: 3011931056] [Chan 9] - ABCD Tx >> [CLEAR FORWARD] 0x08
[09:57:55:877] [Thread: 3011931056] [Chan 9] - ABCD Raw Tx >> 0x09
[09:57:55:909] [Thread: 3074022320] [Chan 9] - ABCD Raw Rx << 0x09
[09:57:55:909] [Thread: 3074022320] [Chan 9] - Bits changed from 0x0C to 0x08
[09:57:55:909] [Thread: 3074022320] [Chan 9] - ABCD Rx << [IDLE] 0x08
[09:57:55:909] [Thread: 3074022320] [Chan 9] - Call ended