asterisk*CLI> misdn show stacks
BEGIN STACK_LIST:
  * Port 1 Type TE Prot. PMP L2Link DOWN L1Link:DOWN Blocked:0  Debug:4
  * Port 2 Type NT Prot. PMP L2Link DOWN L1Link:UP Blocked:0  Debug:4
P[ 0] MGMT: SSTATUS: L1_ACTIVATED
P[ 1] handle_frm: frm->addr:42000103 frm->prim:3f082
P[ 1] handle_frm: frm->addr:42000103 frm->prim:30582
P[ 1] set_channel: bc->channel:0 channel:1
P[ 1] I IND :NEW_CHANNEL oad: dad:XXXXXX pid:4 state:none
P[ 1]  --> channel:1 mode:TE cause:16 ocause:16 rad: cad:
P[ 1]  --> info_dad: onumplan:0 dnumplan:4 rnumplan:  cpnnumplan:0
P[ 1]  --> caps:Speech pi:0 keypad: sending_complete:1
P[ 1]  --> screen:0 --> pres:1
P[ 1]  --> addr:0 l3id:20034 b_stid:0 layer_id:50010180
P[ 1]  --> facility:Fac_None out_facility:Fac_None
P[ 1]  --> bc_state:BCHAN_CLEANED
P[ 1] Chan not existing at the moment bc->l3id:20034 bc:0x81b7078 event:NEW_CHANNEL port:1 channel:1
P[ 1] NO USERUESRINFO
P[ 1]  --> found chan (preselected): 1
P[ 1] set_chan_in_stack: 1
P[ 1] I IND :SETUP oad: dad:XXXXXX pid:4 state:none
P[ 1]  --> channel:1 mode:TE cause:16 ocause:16 rad: cad:
P[ 1]  --> info_dad: onumplan:0 dnumplan:4 rnumplan:  cpnnumplan:0
P[ 1]  --> caps:Speech pi:0 keypad: sending_complete:1
P[ 1]  --> screen:0 --> pres:1
P[ 1]  --> addr:0 l3id:20034 b_stid:0 layer_id:50010180
P[ 1]  --> facility:Fac_None out_facility:Fac_None
P[ 1]  --> bc_state:BCHAN_CLEANED
P[ 1]  --> Bearer: Speech
P[ 1]  --> Codec: Alaw
P[ 1]  --> Bearer: Speech
P[ 1]  --> Codec: Alaw
P[ 0]  --> * NEW CHANNEL dad:XXXXXX oad:
P[ 1] read_config: Getting Config
P[ 1]  --> CTON: Unknown
P[ 1]  --> EXPORT_PID: pid:4
P[ 1]  --> PRES: Restricted (1)
P[ 1]  --> SCREEN: Unscreened (0)
P[ 1] * Queuing chan 0x81fb7d8
P[ 1] I SEND:PROCEEDING oad: dad:XXXXXX pid:4
P[ 1]  --> bc_state:BCHAN_CLEANED
P[ 1]  --> channel:1 mode:TE cause:16 ocause:16 rad: cad:
P[ 1]  --> info_dad: onumplan:0 dnumplan:4 rnumplan:  cpnnumplan:0
P[ 1]  --> caps:Speech pi:0 keypad: sending_complete:1
P[ 1]  --> screen:0 --> pres:1
P[ 1]  --> addr:0 l3id:20034 b_stid:0 layer_id:50010180
P[ 1]  --> facility:Fac_None out_facility:Fac_None
P[ 1] GOT SETUP OK
P[ 1] Sending msg, prim:30280 addr:41000104 dinfo:20034
P[ 1] MGMT: SSTATUS: L2_ESTABLISH
     -- Executing [XXXXXX@incoming:6] Dial("mISDN/1-u6", "misdn/2/XXXXXX/:dAnonymer Anrufer") in new stack
P[ 0]  --> * NEW CHANNEL dad:XXXXXX oad:(null)
P[ 2] * Queuing chan 0x8201b78
P[ 2] read_config: Getting Config
P[ 2]  --> TON: Unknown
P[ 2]  --> LTON: Unknown
P[ 2]  --> CTON: Unknown
P[ 2] * CALL: 2/XXXXXX/:dAnonymer Anrufer
P[ 2]  --> * dad:XXXXXX tech:mISDN/2-u7 ctx:outgoing
P[ 2]  --> * adding2newbc ext XXXXXX
P[ 2]  --> * adding2newbc callerid
P[ 2]  --> pres: -1 screen: -1
P[ 2]  --> pres: 3
P[ 2]  --> PRES: Allowed (0x0)
P[ 2]  --> SCREEN: Network Nr. (0x3)
P[ 2]  --> IMPORT_PID: importing pid:4
P[ 2] SETOPT: Display:Anonymer Anrufer
P[ 2] I SEND:SETUP oad: dad:XXXXXX pid:5
P[ 2]  --> bc_state:BCHAN_CLEANED
P[ 2]  --> channel:0 mode:NT cause:16 ocause:16 rad: cad:
P[ 2]  --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0
P[ 2]  --> caps:Speech pi:0 keypad: sending_complete:0
P[ 2]  --> screen:3 --> pres:0
P[ 2]  --> addr:0 l3id:80010040 b_stid:0 layer_id:50010280
P[ 2]  --> facility:Fac_None out_facility:Fac_None
P[ 2]  --> found chan: 1
P[ 2] set_chan_in_stack: 1
P[ 2]  -->  found channel: 1
P[ 2]  --> new_l3id ff00
P[ 2]  --> * SEND: State Dialing pid:5
    -- Called 2/XXXXXX/:dAnonymer Anrufer
P[ 2]  --> lib: Event_ind:SETUP CONFIRM [NT] : new L3ID  is 8002ff00
P[ 2] I IND :CC_SETUP|CONFIRM: old l3id:ff00 new l3id:8002ff00
P[ 2] I IND :NEW_L3ID oad: dad:XXXXXX pid:5 state:CALLING
P[ 2]  --> channel:1 mode:NT cause:16 ocause:16 rad: cad:
P[ 2]  --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0
P[ 2]  --> caps:Speech pi:0 keypad: sending_complete:0
P[ 2]  --> screen:3 --> pres:0
P[ 2]  --> addr:0 l3id:8002ff00 b_stid:0 layer_id:50010280
P[ 2]  --> facility:Fac_None out_facility:Fac_None
P[ 2]  --> bc_state:BCHAN_CLEANED
P[ 2] % GOT L2 Activate Info.
P[ 2] % GOT L2 Activate Info.
P[ 2] set_channel: bc->channel:1 channel:-1
P[ 2] I IND :PROCEEDING oad: dad:XXXXXX pid:5 state:CALLING
P[ 2]  --> channel:1 mode:NT cause:16 ocause:16 rad: cad:
P[ 2]  --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0
P[ 2]  --> caps:Speech pi:0 keypad: sending_complete:0
P[ 2]  --> screen:3 --> pres:0
P[ 2]  --> addr:0 l3id:8002ff00 b_stid:0 layer_id:50010280
P[ 2]  --> facility:Fac_None out_facility:Fac_None
P[ 2]  --> bc_state:BCHAN_CLEANED
P[ 2]  --> updating channel name to [mISDN/3-u8]
    -- mISDN/3-u8 is proceeding passing it to mISDN/1-u6
P[ 1]  --> * IND :      proceeding pid:4
P[ 1] I SEND:PROCEEDING oad: dad:XXXXXX pid:4
P[ 1]  --> bc_state:BCHAN_CLEANED
P[ 1]  --> channel:1 mode:TE cause:16 ocause:16 rad: cad:
P[ 1]  --> info_dad: onumplan:0 dnumplan:4 rnumplan:  cpnnumplan:0
P[ 1]  --> caps:Speech pi:0 keypad: sending_complete:1
P[ 1]  --> screen:0 --> pres:1
P[ 1]  --> addr:0 l3id:20034 b_stid:0 layer_id:50010180
P[ 1]  --> facility:Fac_None out_facility:Fac_None
P[ 1] Sending msg, prim:30280 addr:41000104 dinfo:20034
P[ 2] set_channel: bc->channel:1 channel:-1
P[ 2] I IND :PROCEEDING oad: dad:XXXXXX pid:5 state:PROCEEDING
P[ 2]  --> channel:1 mode:NT cause:16 ocause:16 rad: cad:
P[ 2]  --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0
P[ 2]  --> caps:Speech pi:0 keypad: sending_complete:0
P[ 2]  --> screen:3 --> pres:0
P[ 2]  --> addr:0 l3id:8002ff00 b_stid:0 layer_id:50010280
P[ 2]  --> facility:Fac_None out_facility:Fac_None
P[ 2]  --> bc_state:BCHAN_CLEANED
P[ 2]  --> updating channel name to [mISDN/3-u9]
    -- mISDN/3-u9 is proceeding passing it to mISDN/1-u6
P[ 1]  --> * IND :      proceeding pid:4
P[ 1] I SEND:PROCEEDING oad: dad:XXXXXX pid:4
P[ 1]  --> bc_state:BCHAN_CLEANED
P[ 1]  --> channel:1 mode:TE cause:16 ocause:16 rad: cad:
P[ 1]  --> info_dad: onumplan:0 dnumplan:4 rnumplan:  cpnnumplan:0
P[ 1]  --> caps:Speech pi:0 keypad: sending_complete:1
P[ 1]  --> screen:0 --> pres:1
P[ 1]  --> addr:0 l3id:20034 b_stid:0 layer_id:50010180
P[ 1]  --> facility:Fac_None out_facility:Fac_None
P[ 1] Sending msg, prim:30280 addr:41000104 dinfo:20034
P[ 2] I IND :ALERTING oad: dad:XXXXXX pid:5 state:PROCEEDING
P[ 2]  --> channel:1 mode:NT cause:16 ocause:16 rad: cad:
P[ 2]  --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0
P[ 2]  --> caps:Speech pi:0 keypad: sending_complete:0
P[ 2]  --> screen:3 --> pres:0
P[ 2]  --> addr:0 l3id:8002ff00 b_stid:0 layer_id:50010280
P[ 2]  --> facility:Fac_None out_facility:Fac_None
P[ 2]  --> bc_state:BCHAN_CLEANED
P[ 2]  --> updating channel name to [mISDN/3-u10]
P[ 2]  --> We have no inband Data, the other end must create ringing
    -- mISDN/3-u10 is ringing
P[ 1] * IND :   ringing pid:4
P[ 1]  --> * IND :      ringing pid:4
P[ 1] I SEND:ALERTING oad: dad:XXXXXX pid:4
P[ 1]  --> bc_state:BCHAN_CLEANED
P[ 1]  --> channel:1 mode:TE cause:16 ocause:16 rad: cad:
P[ 1]  --> info_dad: onumplan:0 dnumplan:4 rnumplan:  cpnnumplan:0
P[ 1]  --> caps:Speech pi:0 keypad: sending_complete:1
P[ 1]  --> screen:0 --> pres:1
P[ 1]  --> addr:0 l3id:20034 b_stid:0 layer_id:50010180
P[ 1]  --> facility:Fac_None out_facility:Fac_None
P[ 1] Sending msg, prim:30180 addr:41000104 dinfo:20034
P[ 1]  --> * SEND: State Ring pid:4
P[ 1]  --> incoming_early_audio off
P[ 2] I IND :ALERTING oad: dad:XXXXXX pid:5 state:ALERTING
P[ 2]  --> channel:1 mode:NT cause:16 ocause:16 rad: cad:
P[ 2]  --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0
P[ 2]  --> caps:Speech pi:0 keypad: sending_complete:0
P[ 2]  --> screen:3 --> pres:0
P[ 2]  --> addr:0 l3id:8002ff00 b_stid:0 layer_id:50010280
P[ 2]  --> facility:Fac_None out_facility:Fac_None
P[ 2]  --> bc_state:BCHAN_CLEANED
P[ 2]  --> updating channel name to [mISDN/3-u11]
P[ 2]  --> We have no inband Data, the other end must create ringing
    -- mISDN/3-u11 is ringing
P[ 2] I IND :CONNECT oad: dad:XXXXXX pid:5 state:ALERTING
P[ 2]  --> channel:1 mode:NT cause:16 ocause:16 rad: cad:
P[ 2]  --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0
P[ 2]  --> caps:Speech pi:0 keypad: sending_complete:0
P[ 2]  --> screen:3 --> pres:0
P[ 2]  --> addr:0 l3id:8002ff00 b_stid:0 layer_id:50010280
P[ 2]  --> facility:Fac_None out_facility:Fac_None
P[ 2]  --> bc_state:BCHAN_CLEANED
P[ 2] I SEND:CONNECT_ACKNOWLEDGE  oad: dad:XXXXXX pid:5
P[ 2]  --> bc_state:BCHAN_CLEANED
P[ 2]  --> channel:1 mode:NT cause:16 ocause:16 rad: cad:
P[ 2]  --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0
P[ 2]  --> caps:Speech pi:0 keypad: sending_complete:0
P[ 2]  --> screen:3 --> pres:0
P[ 2]  --> addr:0 l3id:8002ff00 b_stid:0 layer_id:50010280
P[ 2]  --> facility:Fac_None out_facility:Fac_None
P[ 2] setup_bc: with dsp
P[ 2]  --> Channel is 1
P[ 2]  --> TRANSPARENT Mode
P[ 2] ph_control: c1:2100 c2:0
P[ 2] ec_enable
P[ 2] --> Changing txgain to -1
P[ 2] ph_control: c1:2312 c2:ffffffff
P[ 2]  --> None
P[ 2]  --> Removing Process Id:0 on this port.
P[ 2] lib: Event_ind:CC_NEW_CR : very new L3ID  is 80020040
P[ 2] I IND :NEW_L3ID oad: dad:XXXXXX pid:5 state:CONNECTED
P[ 2]     -- mISDN/3-u11 answered mISDN/1-u6
P[ 1]  --> * IND :      -1! (stop indication) pid:4
P[ 1]  --> None
P[ 1] * ANSWER:
P[ 1]  --> Connection is without BF encryption
P[ 1]  --> None
P[ 1]  --> empty cad using dad
P[ 1] I SEND:CONNECT oad: dad:XXXXXX pid:4
P[ 1]  --> bc_state:BCHAN_CLEANED
P[ 1]  --> channel:1 mode:TE cause:16 ocause:16 rad: cad:XXXXXX
P[ 1]  --> info_dad: onumplan:0 dnumplan:4 rnumplan:  cpnnumplan:0
P[ 1]  --> caps:Speech pi:0 keypad: sending_complete:1
P[ 1]  --> screen:0 --> pres:1
P[ 1]  --> addr:0 l3id:20034 b_stid:0 layer_id:50010180
P[ 1]  --> facility:Fac_None out_facility:Fac_None
 --> channel:1 mode:NT cause:16 ocause:16 rad: cad:
P[ 2]  --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0
P[ 2]  --> caps:Speech pi:0 keypad: sending_complete:0
P[ 2]  --> screen:3 --> pres:0
P[ 2]  --> addr:50010202 l3id:80020040 b_stid:10010200 layer_id:50010280
P[ 2]  --> facility:Fac_None out_facility:Fac_None
P[ 2]  --> bc_state:BCHAN_ACTIVATED
P[ 1] Sending msg, prim:30780 addr:41000104 dinfo:20034
P[ 2] BCHAN: bchan ACT Confirm pid:5
P[ 2] *HOLDER: find 80020041
P[ 2] *HOLDER: find nothing
P[ 2]  --> Didn't found BC so temporarly creating dummy BC (l3id:80020041).
P[ 2] $$$ CLEANUP CALLED pid:0
P[ 2] I IND :RELEASE_COMPLETE oad: dad: pid:0 state:none
P[ 2]  --> channel:0 mode:NT cause:0 ocause:16 rad: cad:
P[ 2]  --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0
P[ 2]  --> caps:Speech pi:0 keypad: sending_complete:0
P[ 2]  --> screen:0 --> pres:0
P[ 2]  --> addr:0 l3id:80020041 b_stid:0 layer_id:0
P[ 2]  --> facility:Fac_None out_facility:Fac_None
P[ 2]  --> bc_state:BCHAN_CLEANED
P[ 2]  --> no Ch, so we've already released.
P[ 0] Cannot hangup chan, no ch
P[ 2] release_chan: Ch not found!
P[ 1] handle_frm: frm->addr:42000103 frm->prim:30f82
P[ 1] setup_bc: with dsp
P[ 1]  --> Channel is 1
P[ 1]  --> TRANSPARENT Mode
P[ 1] ph_control: c1:2100 c2:0
P[ 1] ec_enable
P[ 1] Sending Control ECHOCAN_ON taps:256
P[ 1] Taps is 256
P[ 1] --> Changing txgain to -1
P[ 1] ph_control: c1:2312 c2:ffffffff
P[ 1] I IND :CONNECT_ACKNOWLEDGE  oad: dad:XXXXXX pid:4 state:CONNECTED
P[ 1]  --> channel:1 mode:TE cause:16 ocause:16 rad: cad:XXXXXX
P[ 1]  --> info_dad: onumplan:0 dnumplan:4 rnumplan:  cpnnumplan:0
P[ 1]  --> caps:Speech pi:0 keypad: sending_complete:1
P[ 1]  --> screen:0 --> pres:1
P[ 1]  --> addr:50010102 l3id:20034 b_stid:10010100 layer_id:50010180
P[ 1]  --> facility:Fac_None out_facility:Fac_None
P[ 1]  --> bc_state:BCHAN_ACTIVATED
P[ 1] BCHAN: bchan ACT Confirm pid:4
P[ 1] handle_frm: frm->addr:42000103 frm->prim:34582
P[ 1] I IND :DISCONNECT oad: dad:XXXXXX pid:4 state:CONNECTED
P[ 1]  --> channel:1 mode:TE cause:16 ocause:16 rad: cad:XXXXXX
P[ 1]  --> info_dad: onumplan:0 dnumplan:4 rnumplan:  cpnnumplan:0
P[ 1]  --> caps:Speech pi:8 keypad: sending_complete:1
P[ 1]  --> screen:0 --> pres:1
P[ 1]  --> addr:50010102 l3id:20034 b_stid:10010100 layer_id:50010180
P[ 1]  --> facility:Fac_None out_facility:Fac_None
P[ 1]  --> bc_state:BCHAN_ACTIVATED
P[ 1] $$$ find_holded: --> holded:0 channel:0
P[ 1] $$$ find_holded: --> holded:0 channel:0
P[ 1]  --> org:2 nt:0, inbandavail:0 state:11
P[ 1]  --> queue_hangup
P[ 1] I SEND:RELEASE oad: dad:XXXXXX pid:4
P[ 1]  --> bc_state:BCHAN_ACTIVATED
P[ 1]  --> channel:1 mode:TE cause:16 ocause:-1 rad: cad:XXXXXX
P[ 1]  --> info_dad: onumplan:0 dnumplan:4 rnumplan:  cpnnumplan:0
P[ 1]  --> caps:Speech pi:8 keypad: sending_complete:1
P[ 1]  --> screen:0 --> pres:1
P[ 1]  --> addr:50010102 l3id:20034 b_stid:10010100 layer_id:50010180
P[ 1]  --> facility:Fac_None out_facility:Fac_None
P[ 2] * IND : HANGUP    pid:5 ctx:outgoing dad: oad:XXXXXX State:CONNECTED
P[ 2]  --> l3id:80020040
P[ 2]  --> cause:16
P[ 2]  --> out_cause:16
P[ 2]  --> state:CONNECTED
P[ 2] ph_control: c1:2310 c2:12
P[ 2] I SEND:DISCONNECT oad: dad:XXXXXX pid:5
P[ 2]  --> bc_state:BCHAN_ACTIVATED
P[ 2]  --> channel:1 mode:NT cause:16 ocause:16 rad: cad:
P[ 2]  --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0
P[ 2]  --> caps:Speech pi:8 keypad: sending_complete:0
P[ 2]  --> screen:3 --> pres:0
P[ 2]  --> addr:50010202 l3id:80020040 b_stid:10010200 layer_id:50010280
P[ 2]  --> facility:Fac_None out_facility:Fac_None
P[ 2]  --> Channel: mISDN/3-u11 hanguped new state:CLEANING
  == Spawn extension (incoming, XXXXXX, 6) exited non-zero on 'mISDN/1-u6'
P[ 1] * IND : HANGUP    pid:4 ctx:incoming dad:XXXXXX oad: State:CONNECTED
P[ 1]  --> l3id:20034
P[ 1]  --> cause:16
P[ 1]  --> out_cause:16
P[ 1]  --> state:CONNECTED
P[ 1]  --> Channel: mISDN/1-u6 hanguped new state:CLEANING
P[ 1] Sending msg, prim:34d80 addr:41000104 dinfo:20034
P[ 1] handle_frm: frm->addr:42000103 frm->prim:35a82
P[ 1] I IND :RELEASE_COMPLETE oad: dad:XXXXXX pid:4 state:CLEANING
P[ 1]  --> channel:1 mode:TE cause:16 ocause:16 rad: cad:XXXXXX
P[ 1]  --> info_dad: onumplan:0 dnumplan:4 rnumplan:  cpnnumplan:0
P[ 1]  --> caps:Speech pi:8 keypad: sending_complete:1
P[ 1]  --> screen:0 --> pres:1
P[ 1]  --> addr:50010102 l3id:20034 b_stid:10010100 layer_id:50010180
P[ 1]  --> facility:Fac_None out_facility:Fac_None
P[ 1]  --> bc_state:BCHAN_ACTIVATED
P[ 1] ast_hangup already called, so we have no ast ptr anymore in event(RELEASE_COMPLETE)
P[ 1]  --> No need to queue hangup
P[ 1] Cannot hangup chan, no ast
P[ 1] $$$ CLEANUP CALLED pid:4
P[ 1] $$$ Cleaning up bc with stid :10010100 pid:4
P[ 1]  --> ec_disable
P[ 1] Sending Control ECHOCAN_OFF
P[ 1] ph_control: c1:2319 c2:0
P[ 1] empty_chan_in_stack: 1
P[ 1] handle_frm: frm->addr:42000103 frm->prim:3f182
P[ 1]  --> lib: RELEASE_CR Ind with l3id:20034
P[ 1]  --> lib: CLEANING UP l3id: 20034
P[ 1] $$$ CLEANUP CALLED pid:4
P[ 1] BCHAN: MGR_DELLAYER|CNF pid:4
P[ 2] $$$ CLEANUP CALLED pid:5
P[ 2] $$$ Cleaning up bc with stid :10010200 pid:5
P[ 2]  --> ec_disable
P[ 2] Sending Control ECHOCAN_OFF
P[ 2] ph_control: c1:2319 c2:0
P[ 2] empty_chan_in_stack: 1
P[ 2] I IND :RELEASE oad: dad: pid:5 state:CLEANING
P[ 2]  --> channel:0 mode:NT cause:16 ocause:16 rad: cad:
P[ 2]  --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0
P[ 2]  --> caps:Speech pi:0 keypad: sending_complete:0
P[ 2]  --> screen:3 --> pres:0
P[ 2]  --> addr:50010202 l3id:80020040 b_stid:0 layer_id:50010280
P[ 2]  --> facility:Fac_None out_facility:Fac_None
P[ 2]  --> bc_state:BCHAN_CLEANED
P[ 2] ast_hangup already called, so we have no ast ptr anymore in event(RELEASE)
P[ 2]  --> No need to queue hangup
P[ 2] Cannot hangup chan, no ast
P[ 2] I SEND:RELEASE_COMPLETE oad: dad: pid:5
P[ 2]  --> bc_state:BCHAN_CLEANED
P[ 2]  --> channel:0 mode:NT cause:16 ocause:16 rad: cad:
P[ 2]  --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0
P[ 2]  --> caps:Speech pi:0 keypad: sending_complete:0
P[ 2]  --> screen:3 --> pres:0
P[ 2]  --> addr:50010202 l3id:80020040 b_stid:0 layer_id:50010280
P[ 2]  --> facility:Fac_None out_facility:Fac_None
P[ 2] BCHAN: MGR_DELLAYER|CNF pid:5
P[ 2]  --> Faking Realease_cr for 41000201
P[ 2]  --> lib: RELEASE_CR Ind with l3id:80020040
P[ 2]  --> lib: CLEANING UP l3id: 80020040
P[ 2] $$$ CLEANUP CALLED pid:0