-- Starting Skinny session from 192.168.0.205
Received Alarm Message: 25: Name=SEP001A6CA981E4 Load=4.0(03.02) Last=Phone-Re-IP
Device SEP001A6CA981E4 is attempting to register
     -- Device 'SEP001A6CA981E4' successfully registered
 Requesting capabilities
Version Request*CLI>
Received CapabilitiesRes
 Adding codec capability '4 (4)'
 Adding codec capability '8 (2)'
 Adding codec capability '0 (11)'
 Adding codec capability '256 (12)'
 Adding codec capability '0 (15)'
 Adding codec capability '0 (16)'
 Device capability set to '12'
 Buttontemplate requested
 Adding button: 9, 1
 Sending 30002 template to 7828
Received SoftKey Template Request
Received SoftKeySetReq
Received Time/Date Request
unknown1 in handle_stimulus_message is '0'
 [Jul  9 11:53:19] WARNING[24754]: chan_skinny.c:1252 find_subchannel_by_instance_reference:  Could not find subchannel with refer
ence '0' on '7828'
 Received Stimulus: Line(1)
 Setting ringer mode to '1'.
 skinny_new: tmp->nativeformats=12 fmt=4
 Attempting to Clear display on Skinny 7828@7828
 Clearing Display
     -- Starting simple switch on '7828@7828'
Collected digit: [5]
     -- Asked to indicate 'Stop tone' condition on channel Skinny/7828@7828-1
Collected digit: [2]
     -- Asked to indicate 'Stop tone' condition on channel Skinny/7828@7828-1
Collected digit: [8]
     -- Asked to indicate 'Stop tone' condition on channel Skinny/7828@7828-1
Collected digit: [5]
     -- Executing [5285@longdistance:1] Dial("Skinny/7828@7828-1", "IAX2/isdpbx:password@isdpbx/5285") in new stack
    -- Called isdpbx:password@isdpbx/5285
    -- Call accepted by 192.168.1.15 (format ulaw)
     -- Format for call is ulaw
    -- IAX2/192.168.1.15:4569-1 is ringing
     -- Asked to indicate 'Remote end is ringing' condition on channel Skinny/7828@7828-1
 Displaying Prompt Status 'Ring Out'
Skinny 7828@7828 went on hook
     -- Hungup 'IAX2/192.168.1.15:4569-1'
   == Spawn extension (longdistance, 5285, 1) exited non-zero on 'Skinny/7828@7828-1'
 skinny_hangup(Skinny/7828@7828-1) on 7828@7828
 Setting ringer mode to '1'.
 Clearing Display