DCH 4 UIPE_OMSG CC_SETUP_REQ  REF 0000002E CH 3 15 TOD  19:49:10 CK 2FB2DBFF 
PROGRESS: ORIGINATING END IS NOT ISDN 
CALLING #:3030 NUM PLAN: E164  TON: UNKNOWN  
CALLED  #:104 NUM PLAN: E164  TON: UNKNOWN  

DCH 4 UIPE_IMSG CC_MORE_INFO_IND  REF 0000002E CH 3 15 TOD  19:49:12 CK 2FB2DCBE 
PROGRESS: INBAND INFO OR PATTERN IS AVAIL

DCH 4 UIPE_OMSG CC_INFO_REQ   REF 0000002E CH 3 15 TOD  19:49:12 CK 2FB2DCCA 

DCH 4 UIPE_IMSG CC_SETUP_CONF   REF 0000002E CH 3 15 TOD  19:49:12 CK 2FB2DD8A 
CONNECT




***************************************************************************************


testpc*CLI>
P[ 1]  --> found chan: 1
P[ 1] set_channel: bc->channel:1 channel:15
P[ 1] We already have a channel (1)
P[ 1] set_chan_in_stack: 1
P[ 1] I IND :SETUP oad:3030 dad:104 pid:4 state:none
P[ 1]  --> channel:1 mode:NT cause:16 ocause:16 rad: cad:
P[ 1]  --> info_dad: onumplan:0 dnumplan:0 rnumplan:  cpnnumplan:0
P[ 1]  --> caps:Speech pi:3 keypad: sending_complete:0
P[ 1]  --> screen:0 --> pres:0
P[ 1]  --> addr:0 l3id:2e000000 b_stid:0 layer_id:50010180
P[ 1]  --> facility:FAC_NONE out_facility:FAC_NONE
P[ 1]  --> bc_state:BCHAN_CLEANED
P[ 1]  --> Bearer: Speech
P[ 1]  --> Codec: Alaw
P[ 0]  --> * NEW CHANNEL dad:104 oad:3030
P[ 1]  --> CTON: Unknown
P[ 1]  --> EXPORT_PID: pid:4
P[ 1]  --> PRES: Restricted (0)
P[ 1]  --> SCREEN: Unscreened (0)
P[ 1] * Queuing chan 0x9e3c1b8
P[ 1] I SEND:SETUP_ACKNOWLEDGE oad:3030 dad:104 pid:4
P[ 1]  --> bc_state:BCHAN_CLEANED
P[ 1]  --> channel:1 mode:NT cause:16 ocause:16 rad: cad:
P[ 1]  --> info_dad: onumplan:0 dnumplan:0 rnumplan:  cpnnumplan:0
P[ 1]  --> caps:Speech pi:3 keypad: sending_complete:0
P[ 1]  --> screen:0 --> pres:0
P[ 1]  --> addr:0 l3id:2e000000 b_stid:0 layer_id:50010180
P[ 1]  --> facility:FAC_NONE out_facility:FAC_NONE
P[ 1] setup_bc: with dsp
P[ 1]  --> Channel is 1
P[ 1]  --> TRANSPARENT Mode
P[ 1] BCHAN: bchan ACT Confirm pid:4
P[ 1] * ANSWER:
P[ 1]  --> Connection is without BF encryption
P[ 1]  --> ECHO OFF
P[ 1] ph_control: c1:2303 c2:0
P[ 1]  --> None
P[ 1]  --> empty cad using dad
P[ 1] I SEND:CONNECT oad:3030 dad:104 pid:4
P[ 1]  --> bc_state:BCHAN_ACTIVATED
P[ 1]  --> channel:1 mode:NT cause:16 ocause:16 rad: cad:104
P[ 1]  --> info_dad: onumplan:0 dnumplan:0 rnumplan:  cpnnumplan:0
P[ 1]  --> caps:Speech pi:3 keypad: sending_complete:0
P[ 1]  --> screen:0 --> pres:0
P[ 1]  --> addr:50010102 l3id:2e000000 b_stid:10010100 layer_id:50010180
P[ 1]  --> facility:FAC_NONE out_facility:FAC_NONE
P[ 1] $$$ bc already upsetted stid :10010100 (state:BCHAN_ACTIVATED)
P[ 1] ph_control: c1:2100 c2:0
P[ 1] ec_enable
P[ 1] I IND :INFORMATION oad:3030 dad:104 pid:4 state:CONNECTED
P[ 1]  --> channel:1 mode:NT cause:16 ocause:16 rad: cad:104
P[ 1]  --> info_dad: onumplan:0 dnumplan:0 rnumplan:  cpnnumplan:0
P[ 1]  --> caps:Speech pi:3 keypad: sending_complete:0
P[ 1]  --> screen:0 --> pres:0
P[ 1]  --> addr:50010102 l3id:2e000000 b_stid:10010100 layer_id:50010180
P[ 1]  --> facility:FAC_NONE out_facility:FAC_NONE
P[ 1]  --> bc_state:BCHAN_ACTIVATED
P[ 1]  --> None
P[ 1] * IND :   ringing pid:4
P[ 1]  --> * IND :      ringing pid:4 but Connected, so just send TONE_ALERTING without state changes
P[ 1]  --> * IND :      -1! (stop indication) pid:4
P[ 1]  --> None
Jun 21 19:46:37 NOTICE[7186]: chan_sip.c:11123 handle_request_subscribe: Got SUBSCRIBE for extension 5026@default from 10.203.129.23, but there is no hint for that extension
Jun 21 19:46:38 NOTICE[7186]: chan_sip.c:11123 handle_request_subscribe: Got SUBSCRIBE for extension 5022@default from 10.203.129.23, but there is no hint for that extension
Jun 21 19:46:38 NOTICE[7186]: chan_sip.c:11123 handle_request_subscribe: Got SUBSCRIBE for extension 5023@default from 10.203.129.23, but there is no hint for that extension
Jun 21 19:46:38 NOTICE[7186]: chan_sip.c:11123 handle_request_subscribe: Got SUBSCRIBE for extension 5025@default from 10.203.129.23, but there is no hint for that extension
Jun 21 19:46:38 NOTICE[7186]: chan_sip.c:11123 handle_request_subscribe: Got SUBSCRIBE for extension 5022@default from 10.203.129.23, but there is no hint for that extension
Jun 21 19:46:45 NOTICE[7283]: rtp.c:576 ast_rtp_read: Unknown RTP codec 126 received
Jun 21 19:46:55 NOTICE[7283]: rtp.c:576 ast_rtp_read: Unknown RTP codec 126 received
Jun 21 19:47:05 NOTICE[7283]: rtp.c:576 ast_rtp_read: Unknown RTP codec 126 received
testpc*CLI>
Jun 21 19:47:25 NOTICE[7283]: rtp.c:576 ast_rtp_read: Unknown RTP codec 126 received
P[ 1] I IND :DISCONNECT oad:3030 dad:104 pid:4 state:CONNECTED
P[ 1]  --> channel:1 mode:NT cause:16 ocause:16 rad: cad:104
P[ 1]  --> info_dad: onumplan:0 dnumplan:0 rnumplan:  cpnnumplan:0
P[ 1]  --> caps:Speech pi:0 keypad: sending_complete:0
P[ 1]  --> screen:0 --> pres:0
P[ 1]  --> addr:50010102 l3id:2e000000 b_stid:10010100 layer_id:50010180
P[ 1]  --> facility:FAC_NONE out_facility:FAC_NONE
P[ 1]  --> bc_state:BCHAN_ACTIVATED
P[ 1] $$$ find_holded: --> holded:0 channel:0
P[ 1]  --> org:2 nt:1, inbandavail:0 state:10
P[ 1]  --> queue_hangup
P[ 1] I SEND:RELEASE oad:3030 dad:104 pid:4
P[ 1]  --> bc_state:BCHAN_ACTIVATED
P[ 1]  --> channel:1 mode:NT cause:16 ocause:-1 rad: cad:104
P[ 1]  --> info_dad: onumplan:0 dnumplan:0 rnumplan:  cpnnumplan:0
P[ 1]  --> caps:Speech pi:0 keypad: sending_complete:0
P[ 1]  --> screen:0 --> pres:0
P[ 1]  --> addr:50010102 l3id:2e000000 b_stid:10010100 layer_id:50010180
P[ 1]  --> facility:FAC_NONE out_facility:FAC_NONE
P[ 1] * IND : HANGUP    pid:4 ctx:default dad:104 oad:3030 State:CONNECTED
P[ 1]  --> l3id:2e000000
P[ 1]  --> cause:16
P[ 1]  --> out_cause:16
P[ 1]  --> state:CONNECTED
P[ 1] ph_control: c1:2310 c2:12
P[ 1] I SEND:DISCONNECT oad:3030 dad:104 pid:4
P[ 1]  --> bc_state:BCHAN_ACTIVATED
P[ 1]  --> channel:1 mode:NT cause:16 ocause:16 rad: cad:104
P[ 1]  --> info_dad: onumplan:0 dnumplan:0 rnumplan:  cpnnumplan:0
P[ 1]  --> caps:Speech pi:8 keypad: sending_complete:0
P[ 1]  --> screen:0 --> pres:0
P[ 1]  --> addr:50010102 l3id:2e000000 b_stid:10010100 layer_id:50010180
P[ 1]  --> facility:FAC_NONE out_facility:FAC_NONE
P[ 1]  --> we have already send Disconnect
P[ 1]  --> Channel: mISDN/1-1 hanguped new state:CLEANING
P[ 1] empty_chan_in_stack: 1
P[ 1] $$$ CLEANUP CALLED pid:4
P[ 1] $$$ Cleaning up bc with stid :10010100 pid:4
P[ 1]  --> ec_disable
P[ 1] Sending Control ECHOCAN_OFF
P[ 1] ph_control: c1:2319 c2:0
P[ 1] I IND :RELEASE_COMPLETE oad: dad: pid:4 state:CLEANING
P[ 1]  --> channel:0 mode:NT cause:16 ocause:16 rad: cad:
P[ 1]  --> info_dad: onumplan:0 dnumplan:0 rnumplan:0 cpnnumplan:0
P[ 1]  --> caps:Speech pi:0 keypad: sending_complete:0
P[ 1]  --> screen:0 --> pres:0
P[ 1]  --> addr:50010102 l3id:2e000000 b_stid:0 layer_id:50010180
P[ 1]  --> facility:FAC_NONE out_facility:FAC_NONE
P[ 1]  --> bc_state:BCHAN_CLEANED
P[ 1] ast_hangup already called, so we have no ast ptr anymore in event(RELEASE_COMPLETE)
P[ 1]  --> No need to queue hangup
P[ 1] Cannot hangup chan, no ast
P[ 1]  --> Faking Realease_cr for 41000101
P[ 1]  --> lib: RELEASE_CR Ind with l3id:2e000000
P[ 1]  --> lib: CLEANING UP l3id: 2e000000
P[ 1] $$$ CLEANUP CALLED pid:4
P[ 1] BCHAN: DeACT Conf pid:4
P[ 1] BCHAN: MGR_DELLAYER|CNF pid:4
testpc*CLI>



*