Index: pbx/ael/ael_lex.c
===================================================================
--- pbx/ael/ael_lex.c	(revision 66822)
+++ pbx/ael/ael_lex.c	(working copy)
@@ -230,8 +230,8 @@
 	 */
 	int yy_at_bol;
 
-    int yy_bs_lineno; /**< The line count. */
-    int yy_bs_column; /**< The column count. */
+    int yy_bs_lineno; /*!< The line count. */
+    int yy_bs_column; /*!< The column count. */
     
 	/* Whether to try to fill the input buffer when we reach the
 	 * end of it.
@@ -899,7 +899,7 @@
 #define YY_EXTRA_TYPE void *
 #endif
 
-/* Holds the entire state of the reentrant scanner. */
+/*! \brief Holds the entire state of the reentrant scanner. */
 struct yyguts_t
     {
 
@@ -908,9 +908,9 @@
 
     /* The rest are the same as the globals declared in the non-reentrant scanner. */
     FILE *yyin_r, *yyout_r;
-    size_t yy_buffer_stack_top; /**< index of top of stack. */
-    size_t yy_buffer_stack_max; /**< capacity of stack. */
-    YY_BUFFER_STATE * yy_buffer_stack; /**< Stack as an array. */
+    size_t yy_buffer_stack_top; /*!< index of top of stack. */
+    size_t yy_buffer_stack_max; /*!< capacity of stack. */
+    YY_BUFFER_STATE * yy_buffer_stack; /*!< Stack as an array. */
     char yy_hold_char;
     int yy_n_chars;
     int yyleng_r;
@@ -2176,10 +2176,12 @@
 }
 #endif	/* ifndef YY_NO_INPUT */
 
-/** Immediately switch to a different input stream.
- * @param input_file A readable stream.
- * @param yyscanner The scanner object.
- * @note This function does not reset the start condition to @c INITIAL .
+/*!
+ * \brief Immediately switch to a different input stream.
+ * \param input_file A readable stream.
+ * \param yyscanner The scanner object.
+ *
+ * \note This function does not reset the start condition to @c INITIAL .
  */
     void ael_yyrestart  (FILE * input_file , yyscan_t yyscanner)
 {
@@ -2195,9 +2197,10 @@
 	ael_yy_load_buffer_state(yyscanner );
 }
 
-/** Switch to a different input buffer.
- * @param new_buffer The new input buffer.
- * @param yyscanner The scanner object.
+/*! 
+ * \brief Switch to a different input buffer.
+ * \param new_buffer The new input buffer.
+ * \param yyscanner The scanner object.
  */
     void ael_yy_switch_to_buffer  (YY_BUFFER_STATE  new_buffer , yyscan_t yyscanner)
 {
@@ -2240,11 +2243,13 @@
 	yyg->yy_hold_char = *yyg->yy_c_buf_p;
 }
 
-/** Allocate and initialize an input buffer state.
- * @param file A readable stream.
- * @param size The character buffer size in bytes. When in doubt, use @c YY_BUF_SIZE.
- * @param yyscanner The scanner object.
- * @return the allocated buffer state.
+/*!
+ * \brief Allocate and initialize an input buffer state.
+ * \param file A readable stream.
+ * \param size The character buffer size in bytes. When in doubt, use @c YY_BUF_SIZE.
+ * \param yyscanner The scanner object.
+ *
+ * \return the allocated buffer state.
  */
     YY_BUFFER_STATE ael_yy_create_buffer  (FILE * file, int  size , yyscan_t yyscanner)
 {
@@ -2270,9 +2275,10 @@
 	return b;
 }
 
-/** Destroy the buffer.
- * @param b a buffer created with ael_yy_create_buffer()
- * @param yyscanner The scanner object.
+/*! 
+ * \brief Destroy the buffer.
+ * \param b a buffer created with ael_yy_create_buffer()
+ * \param yyscanner The scanner object.
  */
     void ael_yy_delete_buffer (YY_BUFFER_STATE  b , yyscan_t yyscanner)
 {
@@ -2323,9 +2329,10 @@
 	errno = oerrno;
 }
 
-/** Discard all buffered characters. On the next scan, YY_INPUT will be called.
- * @param b the buffer state to be flushed, usually @c YY_CURRENT_BUFFER.
- * @param yyscanner The scanner object.
+/*!
+ * \brief Discard all buffered characters. On the next scan, YY_INPUT will be called.
+ * \param b the buffer state to be flushed, usually @c YY_CURRENT_BUFFER.
+ * \param yyscanner The scanner object.
  */
     void ael_yy_flush_buffer (YY_BUFFER_STATE  b , yyscan_t yyscanner)
 {
@@ -2351,11 +2358,12 @@
 		ael_yy_load_buffer_state(yyscanner );
 }
 
-/** Pushes the new state onto the stack. The new state becomes
+/*!
+ * \brief Pushes the new state onto the stack. The new state becomes
  *  the current state. This function will allocate the stack
  *  if necessary.
- *  @param new_buffer The new state.
- *  @param yyscanner The scanner object.
+ *  \param new_buffer The new state.
+ *  \param yyscanner The scanner object.
  */
 void ael_yypush_buffer_state (YY_BUFFER_STATE new_buffer , yyscan_t yyscanner)
 {
@@ -2384,9 +2392,10 @@
 	yyg->yy_did_buffer_switch_on_eof = 1;
 }
 
-/** Removes and deletes the top of the stack, if present.
+/*!
+ * \brief Removes and deletes the top of the stack, if present.
  *  The next element becomes the new top.
- *  @param yyscanner The scanner object.
+ *  \param yyscanner The scanner object.
  */
 void ael_yypop_buffer_state (yyscan_t yyscanner)
 {
@@ -2448,11 +2457,13 @@
 	}
 }
 
-/** Setup the input buffer state to scan directly from a user-specified character buffer.
- * @param base the character buffer
- * @param size the size in bytes of the character buffer
- * @param yyscanner The scanner object.
- * @return the newly allocated buffer state object. 
+/*!
+ * \brief Setup the input buffer state to scan directly from a user-specified character buffer.
+ * \param base the character buffer
+ * \param size the size in bytes of the character buffer
+ * \param yyscanner The scanner object.
+ *
+ * \return the newly allocated buffer state object. 
  */
 YY_BUFFER_STATE ael_yy_scan_buffer  (char * base, yy_size_t  size , yyscan_t yyscanner)
 {
@@ -2483,12 +2494,15 @@
 	return b;
 }
 
-/** Setup the input buffer state to scan a string. The next call to ael_yylex() will
+/*!
+ * \brief Setup the input buffer state to scan a string. The next call to ael_yylex() will
  * scan from a @e copy of @a str.
- * @param str a NUL-terminated string to scan
- * @param yyscanner The scanner object.
- * @return the newly allocated buffer state object.
- * @note If you want to scan bytes that may contain NUL values, then use
+ * \param str a NUL-terminated string to scan
+ * \param yyscanner The scanner object.
+ *
+ * \return the newly allocated buffer state object.
+ * 
+ * \note If you want to scan bytes that may contain NUL values, then use
  *       ael_yy_scan_bytes() instead.
  */
 YY_BUFFER_STATE ael_yy_scan_string (yyconst char * str , yyscan_t yyscanner)
@@ -2497,12 +2511,14 @@
 	return ael_yy_scan_bytes(str,strlen(str) ,yyscanner);
 }
 
-/** Setup the input buffer state to scan the given bytes. The next call to ael_yylex() will
+/*!
+ * \brief Setup the input buffer state to scan the given bytes. The next call to ael_yylex() will
  * scan from a @e copy of @a bytes.
- * @param bytes the byte buffer to scan
- * @param len the number of bytes in the buffer pointed to by @a bytes.
- * @param yyscanner The scanner object.
- * @return the newly allocated buffer state object.
+ * \param bytes the byte buffer to scan
+ * \param len the number of bytes in the buffer pointed to by @a bytes.
+ * \param yyscanner The scanner object.
+ * 
+ * \return the newly allocated buffer state object.
  */
 YY_BUFFER_STATE ael_yy_scan_bytes  (yyconst char * bytes, int  len , yyscan_t yyscanner)
 {
@@ -2563,8 +2579,9 @@
 
 /* Accessor  methods (get/set functions) to struct members. */
 
-/** Get the user-defined data for this scanner.
- * @param yyscanner The scanner object.
+/*!
+ * \brief Get the user-defined data for this scanner.
+ * \param yyscanner The scanner object.
  */
 YY_EXTRA_TYPE ael_yyget_extra  (yyscan_t yyscanner)
 {
@@ -2572,8 +2589,9 @@
     return yyextra;
 }
 
-/** Get the current line number.
- * @param yyscanner The scanner object.
+/*!
+ * \brief Get the current line number.
+ * \param yyscanner The scanner object.
  */
 int ael_yyget_lineno  (yyscan_t yyscanner)
 {
@@ -2585,8 +2603,9 @@
     return yylineno;
 }
 
-/** Get the current column number.
- * @param yyscanner The scanner object.
+/*!
+ * \brief Get the current column number.
+ * \param yyscanner The scanner object.
  */
 int ael_yyget_column  (yyscan_t yyscanner)
 {
@@ -2598,8 +2617,9 @@
     return yycolumn;
 }
 
-/** Get the input stream.
- * @param yyscanner The scanner object.
+/*!
+ * \brief Get the input stream.
+ * \param yyscanner The scanner object.
  */
 FILE *ael_yyget_in  (yyscan_t yyscanner)
 {
@@ -2607,8 +2627,9 @@
     return yyin;
 }
 
-/** Get the output stream.
- * @param yyscanner The scanner object.
+/*!
+ * \brief Get the output stream.
+ * \param yyscanner The scanner object.
  */
 FILE *ael_yyget_out  (yyscan_t yyscanner)
 {
@@ -2616,8 +2637,9 @@
     return yyout;
 }
 
-/** Get the length of the current token.
- * @param yyscanner The scanner object.
+/*!
+ * \brief Get the length of the current token.
+ * \param yyscanner The scanner object.
  */
 int ael_yyget_leng  (yyscan_t yyscanner)
 {
@@ -2625,8 +2647,9 @@
     return yyleng;
 }
 
-/** Get the current token.
- * @param yyscanner The scanner object.
+/*!
+ * \brief Get the current token.
+ * \param yyscanner The scanner object.
  */
 
 char *ael_yyget_text  (yyscan_t yyscanner)
@@ -2635,9 +2658,10 @@
     return yytext;
 }
 
-/** Set the user-defined data. This data is never touched by the scanner.
- * @param user_defined The data to be associated with this scanner.
- * @param yyscanner The scanner object.
+/*!
+ * \brief Set the user-defined data. This data is never touched by the scanner.
+ * \param user_defined The data to be associated with this scanner.
+ * \param yyscanner The scanner object.
  */
 void ael_yyset_extra (YY_EXTRA_TYPE  user_defined , yyscan_t yyscanner)
 {
@@ -2645,9 +2669,10 @@
     yyextra = user_defined ;
 }
 
-/** Set the current line number.
- * @param line_number
- * @param yyscanner The scanner object.
+/*!
+ * \brief Set the current line number.
+ * \param line_number
+ * \param yyscanner The scanner object.
  */
 void ael_yyset_lineno (int  line_number , yyscan_t yyscanner)
 {
@@ -2660,9 +2685,10 @@
     yylineno = line_number;
 }
 
-/** Set the current column.
- * @param line_number
- * @param yyscanner The scanner object.
+/*!
+ * \brief Set the current column.
+ * \param line_number
+ * \param yyscanner The scanner object.
  */
 void ael_yyset_column (int  column_no , yyscan_t yyscanner)
 {
@@ -2675,11 +2701,13 @@
     yycolumn = column_no;
 }
 
-/** Set the input stream. This does not discard the current
+/*!
+ * \brief Set the input stream. This does not discard the current
  * input buffer.
- * @param in_str A readable stream.
- * @param yyscanner The scanner object.
- * @see ael_yy_switch_to_buffer
+ * \param in_str A readable stream.
+ * \param yyscanner The scanner object.
+ *
+ * \see ael_yy_switch_to_buffer
  */
 void ael_yyset_in (FILE *  in_str , yyscan_t yyscanner)
 {
  *   each Name-value pair is output as a single row of a two-column table.