Linux version 2.6.18-4-686 (Debian 2.6.18.dfsg.1-11) (waldi@debian.org) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 SMP Wed Feb 21 16:06:54 UTC 2007 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009b800 (usable) BIOS-e820: 000000000009b800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001fe90000 (usable) BIOS-e820: 000000001fe90000 - 000000001fea6000 (ACPI data) BIOS-e820: 000000001fea6000 - 000000001ff00000 (ACPI NVS) BIOS-e820: 000000001ff00000 - 0000000020000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 510MB LOWMEM available. found SMP MP-table at 000f69a0 On node 0 totalpages: 130704 DMA zone: 4096 pages, LIFO batch:0 Normal zone: 126608 pages, LIFO batch:31 DMI present. ACPI: RSDP (v000 HP ) @ 0x000f6970 ACPI: RSDT (v001 HP ML110 G4 0x06040000 FOXC 0x00000000) @ 0x1fea1617 ACPI: FADT (v002 HP ML110 G4 0x06040000 FOXC 0x00000003) @ 0x1fea5e20 ACPI: SPMI (v005 HP ML110 G4 0x06040000 FOXC 0x00000001) @ 0x1fea5ea4 ACPI: SPCR (v001 HP ML110 G4 0x06040000 FOXC 0x00000001) @ 0x1fea5ee4 ACPI: MCFG (v001 HP ML110 G4 0x06040000 FOXC 0x00000000) @ 0x1fea5f34 ACPI: MADT (v001 HP ML110 G4 0x06040000 FOXC 0x00000000) @ 0x1fea5f70 ACPI: BOOT (v001 HP ML110 G4 0x06040000 FOXC 0x00000001) @ 0x1fea5fd8 ACPI: DSDT (v001 HP ML110 G4 0x06040000 MSFT 0x03000000) @ 0x00000000 ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 6:15 APIC version 20 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 6:15 APIC version 20 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000) Detected 1862.176 MHz processor. Built 1 zonelists. Total pages: 130704 Kernel command line: root=/dev/sda1 ro mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 2048 (order: 11, 8192 bytes) Console: colour VGA+ 80x25 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 510624k/522816k available (1544k kernel code, 11592k reserved, 577k data, 196k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 3727.03 BogoMIPS (lpj=7454075) Security Framework v1.0.0 initialized SELinux: Disabled at boot. Capability LSM initialized Mount-cache hash table entries: 512 CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 monitor/mwait feature present. using mwait in idle threads. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU: After all inits, caps: bfebfbff 20100000 00000000 00000940 0000e3bd 00000000 00000001 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code ACPI: Core revision 20060707 CPU0: Intel(R) Xeon(R) CPU 3040 @ 1.86GHz stepping 06 SMP alternatives: switching to SMP code Booting processor 1/1 eip 3000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3724.28 BogoMIPS (lpj=7448564) CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 monitor/mwait feature present. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU: After all inits, caps: bfebfbff 20100000 00000000 00000940 0000e3bd 00000000 00000001 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel(R) Xeon(R) CPU 3040 @ 1.86GHz stepping 06 Total of 2 processors activated (7451.31 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 checking TSC synchronization across 2 CPUs: passed. Brought up 2 CPUs migration_cost=149 checking if image is initramfs... it is Freeing initrd memory: 4383k freed NET: Registered protocol family 16 ACPI: bus type pci registered PCI: BIOS Bug: MCFG area at f0000000 is not E820-reserved PCI: Not using MMCONFIG. PCI: PCI BIOS revision 2.10 entry at 0xfd8c0, last bus=10 PCI: Using configuration type 1 Setting up standard PCI resources ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 Boot video device is 0000:03:00.0 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.LAN1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.LAN2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 10 11 12 14 15) *7 ACPI: PCI Interrupt Link [LNKB] (IRQs 3 10 11 *12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 10 11 12 14 15) *5 ACPI: PCI Interrupt Link [LNKE] (IRQs 3 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *10 11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 10 devices PnPBIOS: Disabled by ACPI PNP PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI: Bridge: 0000:00:1c.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.4 IO window: disabled. MEM window: ef000000-ef8fffff PREFETCH window: ee000000-eeffffff PCI: Bridge: 0000:00:1c.5 IO window: disabled. MEM window: ef900000-ef9fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1e.0 IO window: 4000-4fff MEM window: efa00000-efafffff PREFETCH window: disabled. ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:1c.0 to 64 ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:1c.4 to 64 ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 16 (level, low) -> IRQ 177 PCI: Setting latency timer of device 0000:00:1c.5 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 5, 131072 bytes) TCP bind hash table entries: 8192 (order: 4, 65536 bytes) TCP: Hash tables configured (established 16384 bind 8192) TCP reno registered Simple Boot Flag at 0x37 set to 0x1 audit: initializing netlink socket (disabled) audit(1175272929.064:1): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] Allocate Port Service[0000:00:1c.0:pcie02] PCI: Setting latency timer of device 0000:00:1c.4 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.4:pcie00] Allocate Port Service[0000:00:1c.4:pcie02] PCI: Setting latency timer of device 0000:00:1c.5 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.5:pcie00] Allocate Port Service[0000:00:1c.5:pcie02] isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize PNP: No PS/2 controller found. Probing ports directly. serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 8 NET: Registered protocol family 20 Starting balanced_irq Using IPI No-Shortcut mode ACPI: (supports S0 S4 S5) Time: tsc clocksource has been installed. Freeing unused kernel memory: 196k freed ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: Processor [CPU1] (supports 8 throttling states) ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707] ACPI: Getting cpuindex for acpiid 0x2 ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707] ACPI: Getting cpuindex for acpiid 0x3 usbcore: registered new driver usbfs usbcore: registered new driver hub ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 217 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 217, io mem 0xefd00000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx USB Universal Host Controller Interface driver v3.0 SCSI subsystem initialized libata version 2.00 loaded. tg3.c:v3.65 (August 07, 2006) ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:04:00.0 to 64 eth0: Tigon3 [partno(N/A) rev 4201 PHY(5750)] (PCI Express) 10/100/1000BaseT Ethernet 00:18:71:77:76:2d eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] Split[0] WireSpeed[1] TSOcap[1] eth0: dma_rwctrl[76180000] dma_mask[64-bit] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 217 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 217, io base 0x00003000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 225 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 225, io base 0x00003020 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 233 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 233, io base 0x00003040 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 177 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 177, io base 0x00003060 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected ata_piix 0000:00:1f.2: version 2.00 ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] input: AT Translated Set 2 keyboard as /class/input/input0 ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 225 PCI: Setting latency timer of device 0000:00:1f.2 to 64 ata1: SATA max UDMA/133 cmd 0x30C8 ctl 0x30BE bmdma 0x3090 irq 225 ata2: SATA max UDMA/133 cmd 0x30C0 ctl 0x30BA bmdma 0x3098 irq 225 scsi0 : ata_piix usb 5-1: new full speed USB device using uhci_hcd and address 2 ata1.00: ATA-7, max UDMA/100, 156301488 sectors: LBA48 ata1.00: ata1: dev 0 multi count 16 ata1.00: configured for UDMA/100 scsi1 : ata_piix usb 5-1: configuration #1 chosen from 1 choice usbcore: registered new driver hiddev input: ServerEngines SE USB Device as /class/input/input1 input: USB HID v1.11 Keyboard [ServerEngines SE USB Device] on usb-0000:00:1d.3-1 input: ServerEngines SE USB Device as /class/input/input2 input: USB HID v1.11 Mouse [ServerEngines SE USB Device] on usb-0000:00:1d.3-1 usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver ATA: abnormal status 0x7F on port 0x30C7 Vendor: ATA Model: Maxtor 6L080M0 Rev: BACE Type: Direct-Access ANSI SCSI revision: 05 ICH7: IDE controller at PCI slot 0000:00:1f.1 ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 233 ICH7: chipset revision 1 ICH7: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x3080-0x3087, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x3088-0x308f, BIOS settings: hdc:pio, hdd:pio Probing IDE interface ide0... SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write through SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write through sda: sda1 sda2 sda3 sd 0:0:0:0: Attached scsi disk sda hda: HL-DT-ST RW/DVD GCC-4482B, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hda: ATAPI 48X DVD-ROM CD-R/RW drive, 1536kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 Attempting manual resume kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Real Time Clock Driver v1.12ac Modular ISDN Stack core version (1_1_1) revision ($Revision: 1.40 $) mISDNd: kernel daemon started (current:dfe38000) mISDNd: test event done input: PC Speaker as /class/input/input3 intel_rng: FWH not detected CSLIP: code copyright 1989 Regents of the University of California ts: Compaq touchscreen protocol output ISDN subsystem Rev: 1.1.2.3/1.1.2.3/1.1.2.2/1.1.2.3/1.1.2.2/1.1.2.2 loaded HiSax: Linux Driver for passive ISDN cards HiSax: Version 3.5 (module) HiSax: Layer1 Revision 2.46.2.5 HiSax: Layer2 Revision 2.30.2.4 HiSax: TeiMgr Revision 2.20.2.3 HiSax: Layer3 Revision 2.22.2.3 HiSax: LinkLayer Revision 2.59.2.4 Zapata Telephony Interface Registered on major 196 Zaptel Version: 1.4.0 Echo Canceller: MG2 ACPI: PCI Interrupt 0000:0a:01.0[A] -> GSI 18 (level, low) -> IRQ 233 Freshmaker version: 71 Freshmaker passed register test Module 0: Installed -- AUTO FXO (FCC mode) Module 1: Installed -- AUTO FXO (FCC mode) Module 2: Not installed Module 3: Not installed Found a Wildcard TDM: Wildcard TDM400P REV E/F (2 modules) Registered tone zone 0 (United States / North America) CAPI Subsystem Rev 1.1.2.8 capifs: Rev 1.1.2.3 capi20: Rev 1.1.2.7: started up with major 68 (middleware+capifs) ISDN L1 driver version 1.20 mISDN_register_module(e087a860) ISDN L2 driver version 1.32 mISDN_register_module(e09793e0) mISDN: DSS1 Rev. 1.47 mISDN_register_module(e0a28b60) mISDN Capi 2.0 driver file version 1.21 mISDN_register_module(e09ea580) mISDN: HFC-multi driver Rev. 1.67 HFC-multi: card manufacturer: 'Cologne Chip AG' card name: 'HFC-4S IOB4ST' clock: double ACPI: PCI Interrupt 0000:0a:00.0[A] -> GSI 16 (level, low) -> IRQ 177 HFC-4S#1: defined at IOBASE 0x4400 IRQ 177 HZ 250 leds-type 2 HFC_multi: resetting HFC with chip ID=0xc revision=1 hfcpci_probe: DIPs(0x8f) jumpers(0x0) 1 devices registered mISDN_register_module(e09fdc20) mISDN_dsp: Audio DSP Rev. 1.27 (debug=0x0) EchoCancellor MG2 dtmfthreshold(100) mISDN_dsp: DSP clocks every 128 samples. This equals 4 jiffies. mISDN_register_module(e0ba1440) HFC-4S/8S: Layer 1 driver module for HFC-4S/8S isdn chips, Revision: 1.10 HFC-4S/8S: (C) 2003 Cornelius Consult, www.cornelius-consult.de HFC-4S/8S: found 0 cards Adding 979956k swap on /dev/sda2. Priority:-1 extents:1 across:979956k EXT3 FS on sda1, internal journal loop: loaded (max 8 devices) ztdummy: RTC rate is 1024 Registered tone zone 0 (United States / North America) device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com kjournald starting. Commit interval 5 seconds EXT3 FS on sda3, internal journal EXT3-fs: mounted filesystem with ordered data mode. PM: Writing back config space on device 0000:04:00.0 at offset c (was 60010000, writing 0) PM: Writing back config space on device 0000:04:00.0 at offset 1 (was 100506, writing 100106) NET: Registered protocol family 10 lo: Disabled Privacy Extensions ADDRCONF(NETDEV_UP): eth0: link is not ready IPv6 over IPv4 tunneling driver tg3: eth0: Link is up at 100 Mbps, full duplex. tg3: eth0: Flow control is on for TX and on for RX. ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready ACPI: Power Button (FF) [PWRF] ACPI: Power Button (CM) [PWRB] eth0: no IPv6 routers present DSS1 2 Restart 80 DSS1 2 Resetting channel mISDN_unregister_module(e0ba1440) mISDN_unregister_module(e09ea580) free_Application: no garbage mISDN_unregister_module(e0a28b60) mISDNl3 u_dss1 list not empty mISDN_unregister_module(e09793e0) mISDNl2 l2 list not empty mISDN_unregister_module(e087a860) mISDNl1 inst list not empty mISDN_unregister_module(e09fdc20) ACPI: PCI interrupt for device 0000:0a:00.0 disabled mISDNd: daemon exit now (current:dfe38000) mISDNcore unloaded Modular ISDN Stack core version (1_1_1) revision ($Revision: 1.40 $) mISDNd: kernel daemon started (current:debd0aa0) mISDNd: test event done ISDN L1 driver version 1.20 mISDN_register_module(e087a860) ISDN L2 driver version 1.32 mISDN_register_module(e09793e0) mISDN: DSS1 Rev. 1.47 mISDN_register_module(e09dfb60) mISDN Capi 2.0 driver file version 1.21 mISDN_register_module(e09f4580) mISDN: HFC-multi driver Rev. 1.67 HFC-multi: card manufacturer: 'Cologne Chip AG' card name: 'HFC-4S IOB4ST' clock: double PCI: Enabling device 0000:0a:00.0 (0000 -> 0003) ACPI: PCI Interrupt 0000:0a:00.0[A] -> GSI 16 (level, low) -> IRQ 177 HFC-4S#1: defined at IOBASE 0x4400 IRQ 177 HZ 250 leds-type 2 HFC_multi: resetting HFC with chip ID=0xc revision=1 hfcpci_probe: DIPs(0x8f) jumpers(0x0) register_layer: register_sysfs failed -17 st(00000100) inst(40000100) register_layer: register_sysfs failed -17 st(00000200) inst(40000200) register_layer: register_sysfs failed -17 st(00000300) inst(40000300) register_layer: register_sysfs failed -17 st(00000400) inst(40000400) 1 devices registered mISDN_register_module(e0bfec20) mISDN_dsp: Audio DSP Rev. 1.27 (debug=0x0) EchoCancellor MG2 dtmfthreshold(100) mISDN_dsp: DSP clocks every 128 samples. This equals 4 jiffies. mISDN_register_module(e0b6a440) mISDN_unregister_module(e0b6a440) mISDN_unregister_module(e09f4580) free_Application: no garbage mISDN_unregister_module(e09dfb60) mISDNl3 u_dss1 list not empty mISDN_unregister_module(e09793e0) mISDNl2 l2 list not empty mISDN_unregister_module(e087a860) mISDNl1 inst list not empty mISDN_unregister_module(e0bfec20) ACPI: PCI interrupt for device 0000:0a:00.0 disabled mISDNd: daemon exit now (current:debd0aa0) mISDNcore unloaded Modular ISDN Stack core version (1_1_1) revision ($Revision: 1.40 $) mISDNd: kernel daemon started (current:cd14d550) mISDNd: test event done ISDN L1 driver version 1.20 mISDN_register_module(e087a860) ISDN L2 driver version 1.32 mISDN_register_module(e09793e0) mISDN: DSS1 Rev. 1.47 mISDN_register_module(e09dfb60) mISDN Capi 2.0 driver file version 1.21 mISDN_register_module(e09f4580) mISDN: HFC-multi driver Rev. 1.67 HFC-multi: card manufacturer: 'Cologne Chip AG' card name: 'HFC-4S IOB4ST' clock: double PCI: Enabling device 0000:0a:00.0 (0000 -> 0003) ACPI: PCI Interrupt 0000:0a:00.0[A] -> GSI 16 (level, low) -> IRQ 177 HFC-4S#1: defined at IOBASE 0x4400 IRQ 177 HZ 250 leds-type 2 HFC_multi: resetting HFC with chip ID=0xc revision=1 hfcpci_probe: DIPs(0x8f) jumpers(0x0) register_layer: register_sysfs failed -17 st(00000100) inst(40000100) register_layer: register_sysfs failed -17 st(00000200) inst(40000200) register_layer: register_sysfs failed -17 st(00000300) inst(40000300) register_layer: register_sysfs failed -17 st(00000400) inst(40000400) 1 devices registered mISDN_register_module(e0bfec20) mISDN_dsp: Audio DSP Rev. 1.27 (debug=0x0) EchoCancellor MG2 dtmfthreshold(100) mISDN_dsp: DSP clocks every 128 samples. This equals 4 jiffies. mISDN_register_module(e0b6a440) tei lapd 1 assign req failed MDL_ERROR|REQ (tei_l2) tei lapd 2 assign req failed MDL_ERROR|REQ (tei_l2) tei lapd 3 assign req failed MDL_ERROR|REQ (tei_l2) tei lapd 1 assign req failed MDL_ERROR|REQ (tei_l2) tei lapd 1 assign req failed MDL_ERROR|REQ (tei_l2) mISDN_unregister_module(e0b6a440) mISDN_unregister_module(e09f4580) free_Application: no garbage mISDN_unregister_module(e09dfb60) mISDNl3 u_dss1 list not empty mISDN_unregister_module(e09793e0) mISDNl2 l2 list not empty mISDN_unregister_module(e087a860) mISDNl1 inst list not empty mISDN_unregister_module(e0bfec20) ACPI: PCI interrupt for device 0000:0a:00.0 disabled mISDNd: daemon exit now (current:cd14d550) mISDNcore unloaded Modular ISDN Stack core version (1_1_1) revision ($Revision: 1.40 $) mISDNd: kernel daemon started (current:dfe55550) mISDNd: test event done ISDN L1 driver version 1.20 mISDN_register_module(e087a860) ISDN L2 driver version 1.32 mISDN_register_module(e09793e0) mISDN: DSS1 Rev. 1.47 mISDN_register_module(e09dfb60) mISDN Capi 2.0 driver file version 1.21 mISDN_register_module(e09f4580) mISDN: HFC-multi driver Rev. 1.67 HFC-multi: card manufacturer: 'Cologne Chip AG' card name: 'HFC-4S IOB4ST' clock: double PCI: Enabling device 0000:0a:00.0 (0000 -> 0003) ACPI: PCI Interrupt 0000:0a:00.0[A] -> GSI 16 (level, low) -> IRQ 177 HFC-4S#1: defined at IOBASE 0x4400 IRQ 177 HZ 250 leds-type 2 HFC_multi: resetting HFC with chip ID=0xc revision=1 hfcpci_probe: DIPs(0x8f) jumpers(0x0) register_layer: register_sysfs failed -17 st(00000100) inst(40000100) register_layer: register_sysfs failed -17 st(00000200) inst(40000200) register_layer: register_sysfs failed -17 st(00000300) inst(40000300) register_layer: register_sysfs failed -17 st(00000400) inst(40000400) 1 devices registered mISDN_register_module(e0bfec20) mISDN_dsp: Audio DSP Rev. 1.27 (debug=0x0) EchoCancellor MG2 dtmfthreshold(100) mISDN_dsp: DSP clocks every 128 samples. This equals 4 jiffies. mISDN_register_module(e0b6a440) mISDN_unregister_module(e0b6a440) mISDN_unregister_module(e09f4580) free_Application: no garbage mISDN_unregister_module(e09dfb60) mISDNl3 u_dss1 list not empty mISDN_unregister_module(e09793e0) mISDNl2 l2 list not empty mISDN_unregister_module(e087a860) mISDNl1 inst list not empty mISDN_unregister_module(e0bfec20) ACPI: PCI interrupt for device 0000:0a:00.0 disabled mISDNd: daemon exit now (current:dfe55550) mISDNcore unloaded Modular ISDN Stack core version (1_1_1) revision ($Revision: 1.40 $) mISDNd: kernel daemon started (current:cd148000) mISDNd: test event done ISDN L1 driver version 1.20 mISDN_register_module(e087a860) ISDN L2 driver version 1.32 mISDN_register_module(e09793e0) mISDN: DSS1 Rev. 1.47 mISDN_register_module(e09dfb60) mISDN Capi 2.0 driver file version 1.21 mISDN_register_module(e09f4580) mISDN: HFC-multi driver Rev. 1.67 HFC-multi: card manufacturer: 'Cologne Chip AG' card name: 'HFC-4S IOB4ST' clock: double PCI: Enabling device 0000:0a:00.0 (0000 -> 0003) ACPI: PCI Interrupt 0000:0a:00.0[A] -> GSI 16 (level, low) -> IRQ 177 HFC-4S#1: defined at IOBASE 0x4400 IRQ 177 HZ 250 leds-type 2 HFC_multi: resetting HFC with chip ID=0xc revision=1 hfcpci_probe: DIPs(0x8f) jumpers(0x0) register_layer: register_sysfs failed -17 st(00000100) inst(40000100) register_layer: register_sysfs failed -17 st(00000200) inst(40000200) register_layer: register_sysfs failed -17 st(00000300) inst(40000300) register_layer: register_sysfs failed -17 st(00000400) inst(40000400) 1 devices registered mISDN_register_module(e0bfec20) mISDN_dsp: Audio DSP Rev. 1.27 (debug=0x0) EchoCancellor MG2 dtmfthreshold(100) mISDN_dsp: DSP clocks every 128 samples. This equals 4 jiffies. mISDN_register_module(e0b6a440) tei lapd 1 assign req failed MDL_ERROR|REQ (tei_l2) tei lapd 2 assign req failed MDL_ERROR|REQ (tei_l2) tei lapd 3 assign req failed MDL_ERROR|REQ (tei_l2) tei lapd 1 assign req failed MDL_ERROR|REQ (tei_l2) tei lapd 1 assign req failed MDL_ERROR|REQ (tei_l2) mISDN_unregister_module(e0b6a440) mISDN_unregister_module(e09f4580) free_Application: no garbage mISDN_unregister_module(e09dfb60) mISDNl3 u_dss1 list not empty mISDN_unregister_module(e09793e0) mISDNl2 l2 list not empty mISDN_unregister_module(e087a860) mISDNl1 inst list not empty mISDN_unregister_module(e0bfec20) ACPI: PCI interrupt for device 0000:0a:00.0 disabled mISDNd: daemon exit now (current:cd148000) mISDNcore unloaded Modular ISDN Stack core version (1_1_1) revision ($Revision: 1.40 $) mISDNd: kernel daemon started (current:cd14d550) mISDNd: test event done ISDN L1 driver version 1.20 mISDN_register_module(e087a860) ISDN L2 driver version 1.32 mISDN_register_module(e09793e0) mISDN: DSS1 Rev. 1.47 mISDN_register_module(e09dfb60) mISDN Capi 2.0 driver file version 1.21 mISDN_register_module(e09f4580) mISDN: HFC-multi driver Rev. 1.67 HFC-multi: card manufacturer: 'Cologne Chip AG' card name: 'HFC-4S IOB4ST' clock: double PCI: Enabling device 0000:0a:00.0 (0000 -> 0003) ACPI: PCI Interrupt 0000:0a:00.0[A] -> GSI 16 (level, low) -> IRQ 177 HFC-4S#1: defined at IOBASE 0x4400 IRQ 177 HZ 250 leds-type 2 HFC_multi: resetting HFC with chip ID=0xc revision=1 hfcpci_probe: DIPs(0x8f) jumpers(0x0) register_layer: register_sysfs failed -17 st(00000100) inst(40000100) register_layer: register_sysfs failed -17 st(00000200) inst(40000200) register_layer: register_sysfs failed -17 st(00000300) inst(40000300) register_layer: register_sysfs failed -17 st(00000400) inst(40000400) 1 devices registered mISDN_register_module(e0bfec20) mISDN_dsp: Audio DSP Rev. 1.27 (debug=0x0) EchoCancellor MG2 dtmfthreshold(100) mISDN_dsp: DSP clocks every 128 samples. This equals 4 jiffies. mISDN_register_module(e0b6a440) l2mgr: addr:40000302 prim 23082 G l2mgr: addr:40000302 prim 23082 F mISDN_unregister_module(e0b6a440) mISDN_unregister_module(e09f4580) free_Application: no garbage mISDN_unregister_module(e09dfb60) mISDNl3 u_dss1 list not empty mISDN_unregister_module(e09793e0) mISDNl2 l2 list not empty mISDN_unregister_module(e087a860) mISDNl1 inst list not empty mISDN_unregister_module(e0bfec20) ACPI: PCI interrupt for device 0000:0a:00.0 disabled mISDNd: daemon exit now (current:cd14d550) mISDNcore unloaded Modular ISDN Stack core version (1_1_1) revision ($Revision: 1.40 $) mISDNd: kernel daemon started (current:d87e9aa0) mISDNd: test event done ISDN L1 driver version 1.20 mISDN_register_module(e087a860) ISDN L2 driver version 1.32 mISDN_register_module(e09793e0) mISDN: DSS1 Rev. 1.47 mISDN_register_module(e09dfb60) mISDN Capi 2.0 driver file version 1.21 mISDN_register_module(e09f4580) mISDN: HFC-multi driver Rev. 1.67 HFC-multi: card manufacturer: 'Cologne Chip AG' card name: 'HFC-4S IOB4ST' clock: double PCI: Enabling device 0000:0a:00.0 (0000 -> 0003) ACPI: PCI Interrupt 0000:0a:00.0[A] -> GSI 16 (level, low) -> IRQ 177 HFC-4S#1: defined at IOBASE 0x4400 IRQ 177 HZ 250 leds-type 2 HFC_multi: resetting HFC with chip ID=0xc revision=1 hfcpci_probe: DIPs(0x8f) jumpers(0x0) register_layer: register_sysfs failed -17 st(00000100) inst(40000100) register_layer: register_sysfs failed -17 st(00000200) inst(40000200) register_layer: register_sysfs failed -17 st(00000300) inst(40000300) register_layer: register_sysfs failed -17 st(00000400) inst(40000400) ph_state_change: S/T TE newstate 6 hfcmulti_interrupt: S/T newstate 6 port 0 ph_state_change: S/T TE newstate 6 hfcmulti_interrupt: S/T newstate 6 port 1 ph_state_change: S/T TE newstate 6 hfcmulti_interrupt: S/T newstate 6 port 2 ph_state_change: S/T TE newstate 3 hfcmulti_interrupt: S/T newstate 3 port 3 1 devices registered mISDN_register_module(e0bfec20) mISDN_dsp: Audio DSP Rev. 1.27 (debug=0x0) EchoCancellor MG2 dtmfthreshold(100) mISDN_dsp: DSP clocks every 128 samples. This equals 4 jiffies. mISDN_register_module(e0b6a440) ph_state_change: S/T TE newstate 7 hfcmulti_interrupt: S/T newstate 7 port 0 ph_state_change: S/T TE newstate 7 hfcmulti_interrupt: S/T newstate 7 port 2 ph_state_change: S/T TE newstate 7 hfcmulti_interrupt: S/T newstate 7 port 1 handle_bmsg: unknown PH_CONTROL info 0