---<<BOOT>>---
Copyright (c) 1992-2020 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.2-RELEASE r366954 GENERIC amd64
FreeBSD clang version 10.0.1 (git@github.com:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2)
VT(vga): resolution 640x480
CPU: Intel(R) Atom(TM) CPU D525   @ 1.80GHz (1800.04-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x106ca  Family=0x6  Model=0x1c  Stepping=10
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x40e31d<SSE3,DTES64,MON,DS_CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE>
  AMD Features=0x20100800<SYSCALL,NX,LM>
  AMD Features2=0x1<LAHF>
  TSC: P-state invariant, performance statistics
real memory  = 8589934592 (8192 MB)
avail memory = 8270958592 (7887 MB)
Event timer "LAPIC" quality 100
ACPI APIC Table: <022112 APIC1550>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads
random: unblocking device.
Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 128/64 (20200430/tbfadt-748)
ioapic0: MADT APIC ID 4 != hw id 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
Launching APs: 3 2 1
Timecounter "TSC" frequency 1800041715 Hz quality 1000
random: entropy device external interface
kbd1 at kbdmux0
000.000023 [4336] netmap_init               netmap: loaded module
[ath_hal] loaded
module_register_init: MOD_LOAD (vesa, 0xffffffff81115e40, 0) error 19
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <SMCI > on motherboard
acpi0: Power Button (fixed)
acpi0: _OSC failed: AE_BUFFER_OVERFLOW
cpu0: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 450
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
apei0: <ACPI Platform Error Interface> on acpi0
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
uhci0: <Intel 82801I (ICH9) USB controller> port 0xbc00-0xbc1f irq 16 at device 26.0 on pci0
uhci0: LegSup = 0x2f00
usbus0 on uhci0
usbus0: 12Mbps Full Speed USB v1.0
uhci1: <Intel 82801I (ICH9) USB controller> port 0xb880-0xb89f irq 21 at device 26.1 on pci0
uhci1: LegSup = 0x2f00
usbus1 on uhci1
usbus1: 12Mbps Full Speed USB v1.0
uhci2: <Intel 82801I (ICH9) USB controller> port 0xb800-0xb81f irq 19 at device 26.2 on pci0
uhci2: LegSup = 0x2f00
usbus2 on uhci2
usbus2: 12Mbps Full Speed USB v1.0
ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xfebfbc00-0xfebfbfff irq 18 at device 26.7 on pci0
usbus3: EHCI version 1.0
usbus3 on ehci0
usbus3: 480Mbps High Speed USB v2.0
pcib1: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <PCI-PCI bridge> at device 0.0 on pci1
pci2: <PCI bus> on pcib2
pci2: <network, ethernet> at device 8.0 (no driver attached)
pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0
pci3: <ACPI PCI bus> on pcib3
em0: <Intel(R) PRO/1000 Network Connection> port 0xdc00-0xdc1f mem 0xfe9e0000-0xfe9fffff,0xfe9dc000-0xfe9dffff irq 16 at device 0.0 on pci3
em0: Using 1024 TX descriptors and 1024 RX descriptors
em0: Using 2 RX queues 2 TX queues
em0: Using MSI-X interrupts with 3 vectors
em0: Ethernet address: 00:25:90:97:48:50
em0: netmap queues/slots: TX 2/1024, RX 2/1024
pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0
pci4: <ACPI PCI bus> on pcib4
em1: <Intel(R) PRO/1000 Network Connection> port 0xec00-0xec1f mem 0xfeae0000-0xfeafffff,0xfeadc000-0xfeadffff irq 17 at device 0.0 on pci4
em1: Using 1024 TX descriptors and 1024 RX descriptors
em1: Using 2 RX queues 2 TX queues
em1: Using MSI-X interrupts with 3 vectors
em1: Ethernet address: 00:25:90:97:48:51
em1: netmap queues/slots: TX 2/1024, RX 2/1024
uhci3: <Intel 82801I (ICH9) USB controller> port 0xb480-0xb49f irq 23 at device 29.0 on pci0
uhci3: LegSup = 0x2f00
usbus4 on uhci3
usbus4: 12Mbps Full Speed USB v1.0
uhci4: <Intel 82801I (ICH9) USB controller> port 0xb400-0xb41f irq 19 at device 29.1 on pci0
uhci4: LegSup = 0x2f00
usbus5 on uhci4
usbus5: 12Mbps Full Speed USB v1.0
uhci5: <Intel 82801I (ICH9) USB controller> port 0xb080-0xb09f irq 18 at device 29.2 on pci0
uhci5: LegSup = 0x2f00
usbus6 on uhci5
usbus6: 12Mbps Full Speed USB v1.0
ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xfebfb800-0xfebfbbff irq 23 at device 29.7 on pci0
usbus7: EHCI version 1.0
usbus7 on ehci1
usbus7: 480Mbps High Speed USB v2.0
pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci5: <ACPI PCI bus> on pcib5
vgapci0: <VGA-compatible display> mem 0xfc000000-0xfcffffff,0xfdffc000-0xfdffffff,0xfe000000-0xfe7fffff irq 17 at device 4.0 on pci5
vgapci0: Boot video device
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel ICH9 AHCI SATA controller> port 0xa480-0xa487,0xb000-0xb003,0xac00-0xac07,0xa880-0xa883,0xa800-0xa81f mem 0xfebfb000-0xfebfb7ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.20 with 6 3Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
acpi_button0: <Power Button> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart2: <16550 or compatible> port 0x3e8-0x3ef irq 5 on acpi0
orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff pnpid ORM0000 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12.
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
Trying to mount root from zfs:zroot/ROOT/default []...
Root mount waiting for: usbus0 usbus1 usbus2 usbus3 usbus4 usbus5 usbus6 usbus7 CAM
ugen5.1: <Intel UHCI root HUB> at usbus5
ugen7.1: <Intel EHCI root HUB> at usbus7
ugen6.1: <Intel UHCI root HUB> at usbus6
ugen4.1: <Intel UHCI root HUB> at usbus4
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
ugen2.1: <Intel UHCI root HUB> at usbus2
ugen3.1: <Intel EHCI root HUB> at usbus3
ugen1.1: <Intel UHCI root HUB> at usbus1
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
uhub6: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ugen0.1: <Intel UHCI root HUB> at usbus0
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
uhub7: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ses0 at ahciem0 bus 0 scbus6 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <SuperMicro SSD SOB20R> ACS-2 ATA SATA 3.x device
ada0: Serial Number SMC0515D91320CS65051
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 512bytes)
ada0: Command Queueing enabled
ada0: 60416MB (123731968 512 byte sectors)
ses0: pass0,ada0 in 'Slot 00', SATA Slot: scbus0 target 0
uhub1: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub7: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub0: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
Root mount waiting for: usbus3 usbus7
Root mount waiting for: usbus3 usbus7
uhub2: 6 ports with 6 removable, self powered
uhub6: 6 ports with 6 removable, self powered
ugen4.2: <Chicony USB Keyboard> at usbus4
ukbd0 on uhub3
ukbd0: <Chicony USB Keyboard, class 0/0, rev 2.00/1.00, addr 2> on usbus4
kbd2 at ukbd0
ugen2.2: <Winbond Electronics Corp Hermon USB hidmouse Device> at usbus2
ukbd1 on uhub5
ukbd1: <Winbond Electronics Corp Hermon USB hidmouse Device, class 0/0, rev 1.10/0.01, addr 2> on usbus2
kbd3 at ukbd1
lo0: link state changed to UP
lagg0: link state changed to DOWN
em0: link state changed to UP
lagg0: link state changed to UP
em1: link state changed to UP
uhid0 on uhub3
uhid0: <Chicony USB Keyboard, class 0/0, rev 2.00/1.00, addr 2> on usbus4
ums0 on uhub5
ums0: <Winbond Electronics Corp Hermon USB hidmouse Device, class 0/0, rev 1.10/0.01, addr 2> on usbus2
ums0: 3 buttons and [Z] coordinates ID=0
Security policy loaded: MAC/ntpd (mac_ntpd)
bridge1: Ethernet address: 02:ec:ed:01:b9:01
em0: promiscuous mode enabled
em1: promiscuous mode enabled
em0: link state changed to DOWN
em1: link state changed to DOWN
lagg0: promiscuous mode enabled
bridge1: link state changed to UP
lagg0: link state changed to DOWN
epair1a: Ethernet address: 02:48:58:42:85:0a
epair1b: Ethernet address: 02:48:58:42:85:0b
epair1a: link state changed to UP
epair1b: link state changed to UP
epair1a: promiscuous mode enabled
em0: link state changed to UP
lagg0: link state changed to UP
em1: link state changed to UP
epair1b: changing name to 'eth0'
lo0: link state changed to UP
em0: link state changed to DOWN
em1: link state changed to DOWN
lagg0: link state changed to DOWN
em1: link state changed to UP
lagg0: link state changed to UP
em0: link state changed to UP
ugen4.2: <Chicony USB Keyboard> at usbus4 (disconnected)
ukbd0: at uhub3, port 1, addr 2 (disconnected)
ukbd0: detached
uhid0: at uhub3, port 1, addr 2 (disconnected)
uhid0: detached