3 x*CLI> 3 < [ 00 81 1a 18 08 01 46 05 04 02 88 90 18 01 83 6c 05 80 38 31 30 30 70 05 80 38 32 30 30 f6 ] 3 3 < Informational frame: 3 < SAPI: 00 C/R: 0 EA: 0 3 < TEI: 064 EA: 1 3 < N(S): 013 0: 0 3 < N(R): 012 P: 0 3 < 26 bytes of data 3 Handling message for SAPI/TEI=0/64 3 -- Restarting T203 timer 3 -- ACKing all packets from 11 to (but not including) 12 3 -- Since there was nothing left, stopping T200 counter 3 -- Stopping T203 counter since we got an ACK 3 -- Nothing left, starting T203 counter 3 < Protocol Discriminator: Q.931 (8) len=26 3 < Call Ref: len= 1 (reference 70/0x46) (Originator) 3 < Message Type: SETUP (5) 3 < [04 02 88 90] 3 < Bearer Capability (len= 4) [ Ext: 1 Q.931 Std: 0 Info transfer capability: Unrestricted digital information (8) 3 < Ext: 1 Trans mode/rate: 64kbps, circuit-mode (16) 3 < [18 01 83] 3 < Channel ID (len= 3) [ Ext: 1 IntID: Implicit BRI Spare: 0 Preferred Dchan: 0 3 < ChanSel: Any channel selected 3 ] 3 < [6c 05 80 38 31 30 30] 3 < Calling Number (len= 7) [ Ext: 1 TON: Unknown Number Type (0) NPI: Unknown Number Plan (0) 3 < Presentation: Presentation permitted, user number not screened (0) '8100' ] 3 < [70 05 80 38 32 30 30] 3 < Called Number (len= 7) [ Ext: 1 TON: Unknown Number Type (0) NPI: Unknown Number Plan (0) '8200' ] 3 < [f6] [Oct 29 22:21:45] ERROR[20546]: chan_dahdi.c:13178 dahdi_pri_error: 3 !! < Unknown IE 240 (cs0, len = 1) 3 -- Making new call for cr 70 3 Received message for call 0xb712ea10 on 0x97b1c20 TEI/SAPI 64/0, call->pri is 0x97b1c20 TEI/SAPI 64/0 3 -- Processing Q.931 Call Setup 3 -- Processing IE 4 (cs0, Bearer Capability) 3 -- Processing IE 24 (cs0, Channel Identification) 3 -- Processing IE 108 (cs0, Calling Party Number) 3 -- Processing IE 112 (cs0, Called Party Number) 3 -- Processing IE 246 (cs0, Unknown Information Element) 3 !! Unknown IE 246 (cs0, Unknown Information Element) 3 q931.c:6268 post_handle_q931_message: Call 70 enters state 6 (Call Present). Hold state: Idle 3 Sending Receiver Ready (14) 3 3 > [ 00 81 01 1c ] 3 3 > Supervisory frame: 3 > SAPI: 00 C/R: 0 EA: 0 3 > TEI: 064 EA: 1 3 > Zero: 0 S: 0 01: 1 [ RR (receive ready) ] 3 > N(R): 014 P/F: 0 3 > 0 bytes of data 3 q931.c:4145 q931_call_proceeding: Call 70 enters state 9 (Incoming Call Proceeding). Hold state: Idle 3 Sending message for call 0xb712ea10 on 0x97b1c20 TEI/SAPI 64/0, call->pri is 0x97b1c20, TEI/SAPI 64/0 3 TEI/SAPI: 64/0 state 7 retran 0 busy 0 3 -- Finally transmitting 12, since window opened up (0) 3 3 > [ 02 81 18 1c 08 01 c6 02 18 01 8a ] 3 3 > Informational frame: 3 > SAPI: 00 C/R: 1 EA: 0 3 > TEI: 064 EA: 1 3 > N(S): 012 0: 0 3 > N(R): 014 P: 0 3 > 7 bytes of data 3 Stopping T_203 timer 3 Starting T_200 timer 3 -- Restarting T200 timer 3 > Protocol Discriminator: Q.931 (8) len=7 3 > Call Ref: len= 1 (reference 70/0x46) (Terminator) 3 > Message Type: CALL PROCEEDING (2) 3 > [18 01 8a] 3 > Channel ID (len= 3) [ Ext: 1 IntID: Implicit BRI Spare: 0 Exclusive Dchan: 0 3 > ChanSel: B2 channel 3 ] -- Accepting call from '8100' to '8200' on channel 0/2, span 3 -- Executing [8200@phones:1] Dial("DAHDI/ISDN-3-4", "DAHDI/g4d/8200") in new stack 4 -- Making new call for cr 32773 -- Requested transfer capability: 0x08 - DIGITAL 4 Sending message for call 0x97beb60 on 0x97a0940 TEI/SAPI 127/63, call->pri is 0x97a0940, TEI/SAPI 127/63 4 4 > [ 02 ff 03 08 01 05 05 04 02 88 90 18 01 89 6c 06 00 80 38 31 30 30 70 05 80 38 32 30 30 a1 ] 4 4 > Unnumbered frame: 4 > SAPI: 00 C/R: 1 EA: 0 4 > TEI: 127 EA: 1 4 > M3: 0 P/F: 0 M2: 0 11: 3 [ UI (unnumbered information) ] 4 > 27 bytes of data 4 > Protocol Discriminator: Q.931 (8) len=27 4 > Call Ref: len= 1 (reference 5/0x5) (Originator) 4 > Message Type: SETUP (5) 4 > [04 02 88 90] 4 > Bearer Capability (len= 4) [ Ext: 1 Q.931 Std: 0 Info transfer capability: Unrestricted digital information (8) 4 > Ext: 1 Trans mode/rate: 64kbps, circuit-mode (16) 4 > [18 01 89] 4 > Channel ID (len= 3) [ Ext: 1 IntID: Implicit BRI Spare: 0 Exclusive Dchan: 0 4 > ChanSel: B1 channel 4 ] 4 > [6c 06 00 80 38 31 30 30] 4 > Calling Number (len= 8) [ Ext: 0 TON: Unknown Number Type (0) NPI: Unknown Number Plan (0) 4 > Presentation: Presentation permitted, user number not screened (0) '8100' ] 4 > [70 05 80 38 32 30 30] 4 > Called Number (len= 7) [ Ext: 1 TON: Unknown Number Type (0) NPI: Unknown Number Plan (0) '8200' ] 4 > [a1] 4 > Sending Complete (len= 1) 4 q931.c:4577 q931_setup: Call 32773 enters state 1 (Call Initiated). Hold state: Idle -- Called g4d/8200 3 x*CLI> 3 < [ 02 81 01 1a ] 3 3 < Supervisory frame: 3 < SAPI: 00 C/R: 1 EA: 0 3 < TEI: 064 EA: 1 3 < Zero: 0 S: 0 01: 1 [ RR (receive ready) ] 3 < N(R): 013 P/F: 0 3 < 0 bytes of data 3 Handling message for SAPI/TEI=0/64 3 -- Restarting T203 timer 3 -- ACKing all packets from 11 to (but not including) 13 3 -- ACKing packet 12, new txqueue is -1 (-1 means empty) 3 -- Since there was nothing left, stopping T200 counter 3 -- Stopping T203 counter since we got an ACK 3 -- Nothing left, starting T203 counter 4 x*CLI> 4 < [ 00 81 18 12 08 01 85 01 18 01 89 ] 4 4 < Informational frame: 4 < SAPI: 00 C/R: 0 EA: 0 4 < TEI: 064 EA: 1 4 < N(S): 012 0: 0 4 < N(R): 009 P: 0 4 < 7 bytes of data 4 Handling message for SAPI/TEI=0/64 4 -- Restarting T203 timer 4 -- ACKing all packets from 8 to (but not including) 9 4 -- Since there was nothing left, stopping T200 counter 4 -- Stopping T203 counter since we got an ACK 4 -- Nothing left, starting T203 counter 4 < Protocol Discriminator: Q.931 (8) len=7 4 < Call Ref: len= 1 (reference 5/0x5) (Terminator) 4 < Message Type: ALERTING (1) 4 < [18 01 89] 4 < Channel ID (len= 3) [ Ext: 1 IntID: Implicit BRI Spare: 0 Exclusive Dchan: 0 4 < ChanSel: B1 channel 4 ] 4 Adding subcall 0x97bf440 for TEI 64 to call 0x97beb60 at position 0 4 Received message for call 0x97bf440 on 0x97b4ab0 TEI/SAPI 64/0, call->pri is 0x97b4ab0 TEI/SAPI 64/0 4 -- Processing IE 24 (cs0, Channel Identification) 4 q931.c:6017 nt_ptmp_handle_q931_message: Call 32773 enters state 4 (Call Delivered). Hold state: Idle 4 q931.c:6386 post_handle_q931_message: Subcall 32773 enters state 4 (Call Delivered). Hold state: Idle 4 Sending Receiver Ready (13) 4 4 > [ 00 81 01 1a ] 4 4 > Supervisory frame: 4 > SAPI: 00 C/R: 0 EA: 0 4 > TEI: 064 EA: 1 4 > Zero: 0 S: 0 01: 1 [ RR (receive ready) ] 4 > N(R): 013 P/F: 0 4 > 0 bytes of data -- DAHDI/ISDN-4-4 is ringing 3 q931.c:4173 q931_alerting: Call 70 enters state 7 (Call Received). Hold state: Idle 3 Sending message for call 0xb712ea10 on 0x97b1c20 TEI/SAPI 64/0, call->pri is 0x97b1c20, TEI/SAPI 64/0 3 TEI/SAPI: 64/0 state 7 retran 0 busy 0 3 -- Finally transmitting 13, since window opened up (0) 3 3 > [ 02 81 1a 1c 08 01 c6 01 1e 02 81 88 ] 3 3 > Informational frame: 3 > SAPI: 00 C/R: 1 EA: 0 3 > TEI: 064 EA: 1 3 > N(S): 013 0: 0 3 > N(R): 014 P: 0 3 > 8 bytes of data 3 Stopping T_203 timer 3 Starting T_200 timer 3 -- Restarting T200 timer 3 > Protocol Discriminator: Q.931 (8) len=8 3 > Call Ref: len= 1 (reference 70/0x46) (Terminator) 3 > Message Type: ALERTING (1) 3 > [1e 02 81 88] 3 > Progress Indicator (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location: Private network serving the local user (1) 3 > Ext: 1 Progress Description: Inband information or appropriate pattern now available. (8) ] 3 x*CLI> 3 < [ 02 81 01 1c ] 3 3 < Supervisory frame: 3 < SAPI: 00 C/R: 1 EA: 0 3 < TEI: 064 EA: 1 3 < Zero: 0 S: 0 01: 1 [ RR (receive ready) ] 3 < N(R): 014 P/F: 0 3 < 0 bytes of data 3 Handling message for SAPI/TEI=0/64 3 -- Restarting T203 timer 3 -- ACKing all packets from 12 to (but not including) 14 3 -- ACKing packet 13, new txqueue is -1 (-1 means empty) 3 -- Since there was nothing left, stopping T200 counter 3 -- Stopping T203 counter since we got an ACK 3 -- Nothing left, starting T203 counter 4 x*CLI> 4 < [ 00 81 1a 12 08 01 85 07 ] 4 4 < Informational frame: 4 < SAPI: 00 C/R: 0 EA: 0 4 < TEI: 064 EA: 1 4 < N(S): 013 0: 0 4 < N(R): 009 P: 0 4 < 4 bytes of data 4 Handling message for SAPI/TEI=0/64 4 -- Restarting T203 timer 4 -- ACKing all packets from 8 to (but not including) 9 4 -- Since there was nothing left, stopping T200 counter 4 -- Stopping T203 counter since we got an ACK 4 -- Nothing left, starting T203 counter 4 < Protocol Discriminator: Q.931 (8) len=4 4 < Call Ref: len= 1 (reference 5/0x5) (Terminator) 4 < Message Type: CONNECT (7) 4 Received message for call 0x97bf440 on 0x97b4ab0 TEI/SAPI 64/0, call->pri is 0x97b4ab0 TEI/SAPI 64/0 4 q931.c:6022 nt_ptmp_handle_q931_message: Call 32773 enters state 10 (Active). Hold state: Idle 4 q931.c:6419 post_handle_q931_message: Subcall 32773 enters state 10 (Active). Hold state: Idle 4 Sending message for call 0x97bf440 on 0x97b4ab0 TEI/SAPI 64/0, call->pri is 0x97b4ab0, TEI/SAPI 64/0 4 TEI/SAPI: 64/0 state 7 retran 0 busy 0 4 -- Finally transmitting 9, since window opened up (0) 4 4 > [ 02 81 12 1c 08 01 05 0f ] 4 x*CLI> 4 > Informational frame: 4 > SAPI: 00 C/R: 1 EA: 0 4 > TEI: 064 EA: 1 4 > N(S): 009 0: 0 4 > N(R): 014 P: 0 4 > 4 bytes of data 4 Stopping T_203 timer 4 Starting T_200 timer 4 -- Restarting T200 timer 4 > Protocol Discriminator: Q.931 (8) len=4 4 > Call Ref: len= 1 (reference 5/0x5) (Originator) 4 > Message Type: CONNECT ACKNOWLEDGE (15) -- DAHDI/ISDN-4-4 answered DAHDI/ISDN-3-4 3 q931.c:4302 q931_connect: Call 70 enters state 10 (Active). Hold state: Idle 3 Sending message for call 0xb712ea10 on 0x97b1c20 TEI/SAPI 64/0, call->pri is 0x97b1c20, TEI/SAPI 64/0 3 TEI/SAPI: 64/0 state 7 retran 0 busy 0 3 -- Finally transmitting 14, since window opened up (0) 3 3 > [ 02 81 1c 1c 08 01 c6 07 18 01 8a 1e 02 81 82 ] 3 3 > Informational frame: 3 > SAPI: 00 C/R: 1 EA: 0 3 > TEI: 064 EA: 1 3 > N(S): 014 0: 0 3 > N(R): 014 P: 0 3 > 11 bytes of data 3 Stopping T_203 timer 3 Starting T_200 timer 3 -- Restarting T200 timer 3 > Protocol Discriminator: Q.931 (8) len=11 3 > Call Ref: len= 1 (reference 70/0x46) (Terminator) 3 > Message Type: CONNECT (7) 3 > [18 01 8a] 3 > Channel ID (len= 3) [ Ext: 1 IntID: Implicit BRI Spare: 0 Exclusive Dchan: 0 3 > ChanSel: B2 channel 3 ] 3 > [1e 02 81 82] 3 > Progress Indicator (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location: Private network serving the local user (1) 3 > Ext: 1 Progress Description: Called equipment is non-ISDN. (2) ] -- Native bridging DAHDI/ISDN-3-4 and DAHDI/ISDN-4-4 4 x*CLI> 4 < [ 02 81 01 14 ] 4 4 < Supervisory frame: 4 < SAPI: 00 C/R: 1 EA: 0 4 < TEI: 064 EA: 1 4 < Zero: 0 S: 0 01: 1 [ RR (receive ready) ] 4 < N(R): 010 P/F: 0 4 < 0 bytes of data 4 Handling message for SAPI/TEI=0/64 4 -- Restarting T203 timer 4 -- ACKing all packets from 8 to (but not including) 10 4 -- ACKing packet 9, new txqueue is -1 (-1 means empty) 4 -- Since there was nothing left, stopping T200 counter 4 -- Stopping T203 counter since we got an ACK 4 -- Nothing left, starting T203 counter 3 x*CLI> 3 < [ 02 81 01 1e ] 3 3 < Supervisory frame: 3 < SAPI: 00 C/R: 1 EA: 0 3 < TEI: 064 EA: 1 3 < Zero: 0 S: 0 01: 1 [ RR (receive ready) ] 3 < N(R): 015 P/F: 0 3 < 0 bytes of data 3 Handling message for SAPI/TEI=0/64 3 -- Restarting T203 timer 3 -- ACKing all packets from 13 to (but not including) 15 3 -- ACKing packet 14, new txqueue is -1 (-1 means empty) 3 -- Since there was nothing left, stopping T200 counter 3 -- Stopping T203 counter since we got an ACK 3 -- Nothing left, starting T203 counter 3 x*CLI> 3 < [ 00 81 1c 1e 08 01 46 0f ] 3 3 < Informational frame: 3 < SAPI: 00 C/R: 0 EA: 0 3 < TEI: 064 EA: 1 3 < N(S): 014 0: 0 3 < N(R): 015 P: 0 3 < 4 bytes of data 3 Handling message for SAPI/TEI=0/64 3 -- Restarting T203 timer 3 -- ACKing all packets from 14 to (but not including) 15 3 -- Since there was nothing left, stopping T200 counter 3 -- Stopping T203 counter since we got an ACK 3 -- Nothing left, starting T203 counter 3 < Protocol Discriminator: Q.931 (8) len=4 3 < Call Ref: len= 1 (reference 70/0x46) (Originator) 3 < Message Type: CONNECT ACKNOWLEDGE (15) 3 Received message for call 0xb712ea10 on 0x97b1c20 TEI/SAPI 64/0, call->pri is 0x97b1c20 TEI/SAPI 64/0 3 Sending Receiver Ready (15) 3 3 > [ 00 81 01 1e ] 3 3 > Supervisory frame: 3 > SAPI: 00 C/R: 0 EA: 0 3 > TEI: 064 EA: 1 3 > Zero: 0 S: 0 01: 1 [ RR (receive ready) ] 3 > N(R): 015 P/F: 0 3 > 0 bytes of data 4 x*CLI> 4 < [ 00 81 01 15 ] 4 4 < Supervisory frame: 4 < SAPI: 00 C/R: 0 EA: 0 4 < TEI: 064 EA: 1 4 < Zero: 0 S: 0 01: 1 [ RR (receive ready) ] 4 < N(R): 010 P/F: 1 4 < 0 bytes of data 4 Handling message for SAPI/TEI=0/64 4 -- Restarting T203 timer 4 -- ACKing all packets from 9 to (but not including) 10 4 -- Since there was nothing left, stopping T200 counter 4 -- Stopping T203 counter since we got an ACK 4 -- Nothing left, starting T203 counter 4 -- Unsolicited RR with P/F bit, responding 4 Sending Receiver Ready (14) 4 4 > [ 00 81 01 1d ] 4 4 > Supervisory frame: 4 > SAPI: 00 C/R: 0 EA: 0 4 > TEI: 064 EA: 1 4 > Zero: 0 S: 0 01: 1 [ RR (receive ready) ] 4 > N(R): 014 P/F: 1 4 > 0 bytes of data 3 x*CLI> 3 < [ 00 81 01 1f ] 3 3 < Supervisory frame: 3 < SAPI: 00 C/R: 0 EA: 0 3 < TEI: 064 EA: 1 3 < Zero: 0 S: 0 01: 1 [ RR (receive ready) ] 3 < N(R): 015 P/F: 1 3 < 0 bytes of data 3 Handling message for SAPI/TEI=0/64 3 -- Restarting T203 timer 3 -- ACKing all packets from 14 to (but not including) 15 3 -- Since there was nothing left, stopping T200 counter 3 -- Stopping T203 counter since we got an ACK 3 -- Nothing left, starting T203 counter 3 -- Unsolicited RR with P/F bit, responding 3 Sending Receiver Ready (15) 3 3 > [ 00 81 01 1f ] 3 3 > Supervisory frame: 3 > SAPI: 00 C/R: 0 EA: 0 3 > TEI: 064 EA: 1 3 > Zero: 0 S: 0 01: 1 [ RR (receive ready) ] 3 > N(R): 015 P/F: 1 3 > 0 bytes of data 4 x*CLI> 4 < [ 00 81 01 15 ] 4 4 < Supervisory frame: 4 < SAPI: 00 C/R: 0 EA: 0 4 < TEI: 064 EA: 1 4 < Zero: 0 S: 0 01: 1 [ RR (receive ready) ] 4 < N(R): 010 P/F: 1 4 < 0 bytes of data 4 Handling message for SAPI/TEI=0/64 4 -- Restarting T203 timer 4 -- ACKing all packets from 9 to (but not including) 10 4 -- Since there was nothing left, stopping T200 counter 4 -- Stopping T203 counter since we got an ACK 4 -- Nothing left, starting T203 counter 4 -- Unsolicited RR with P/F bit, responding 4 Sending Receiver Ready (14) 4 4 > [ 00 81 01 1d ] 4 4 > Supervisory frame: 4 > SAPI: 00 C/R: 0 EA: 0 4 > TEI: 064 EA: 1 4 > Zero: 0 S: 0 01: 1 [ RR (receive ready) ] 4 > N(R): 014 P/F: 1 4 > 0 bytes of data 3 x*CLI> 3 < [ 00 81 01 1f ] 3 3 < Supervisory frame: 3 < SAPI: 00 C/R: 0 EA: 0 3 < TEI: 064 EA: 1 3 < Zero: 0 S: 0 01: 1 [ RR (receive ready) ] 3 < N(R): 015 P/F: 1 3 < 0 bytes of data 3 Handling message for SAPI/TEI=0/64 3 -- Restarting T203 timer 3 -- ACKing all packets from 14 to (but not including) 15 3 -- Since there was nothing left, stopping T200 counter 3 -- Stopping T203 counter since we got an ACK 3 -- Nothing left, starting T203 counter 3 -- Unsolicited RR with P/F bit, responding 3 Sending Receiver Ready (15) 3 3 > [ 00 81 01 1f ] 3 3 > Supervisory frame: 3 > SAPI: 00 C/R: 0 EA: 0 3 > TEI: 064 EA: 1 3 > Zero: 0 S: 0 01: 1 [ RR (receive ready) ] 3 > N(R): 015 P/F: 1 3 > 0 bytes of data 3 x*CLI> 3 < [ 00 81 1e 1e 08 01 46 45 08 02 80 90 ] 3 3 < Informational frame: 3 < SAPI: 00 C/R: 0 EA: 0 3 < TEI: 064 EA: 1 3 < N(S): 015 0: 0 3 < N(R): 015 P: 0 3 < 8 bytes of data 3 Handling message for SAPI/TEI=0/64 3 -- Restarting T203 timer 3 -- ACKing all packets from 14 to (but not including) 15 3 -- Since there was nothing left, stopping T200 counter 3 -- Stopping T203 counter since we got an ACK 3 -- Nothing left, starting T203 counter 3 < Protocol Discriminator: Q.931 (8) len=8 3 < Call Ref: len= 1 (reference 70/0x46) (Originator) 3 < Message Type: DISCONNECT (69) 3 < [08 02 80 90] 3 < Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0 Location: User (0) 3 < Ext: 1 Cause: Normal Clearing (16), class = Normal Event (1) ] 3 Received message for call 0xb712ea10 on 0x97b1c20 TEI/SAPI 64/0, call->pri is 0x97b1c20 TEI/SAPI 64/0 3 -- Processing IE 8 (cs0, Cause) 3 -- Found active call: 0xb712ea10 cref:70 3 q931.c:6704 post_handle_q931_message: Call 70 enters state 12 (Disconnect Indication). Hold state: Idle 3 Sending Receiver Ready (16) 3 3 > [ 00 81 01 20 ] 3 3 > Supervisory frame: 3 > SAPI: 00 C/R: 0 EA: 0 3 > TEI: 064 EA: 1 3 > Zero: 0 S: 0 01: 1 [ RR (receive ready) ] 3 > N(R): 016 P/F: 0 3 > 0 bytes of data -- Channel 0/2, span 3 got hangup request, cause 16 4 NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Active, peerstate Connect Request, hold-state Idle 4 q931.c:4389 q931_disconnect: Subcall 32773 enters state 11 (Disconnect Request). Hold state: Idle 4 Sending message for call 0x97bf440 on 0x97b4ab0 TEI/SAPI 64/0, call->pri is 0x97b4ab0, TEI/SAPI 64/0 4 TEI/SAPI: 64/0 state 7 retran 0 busy 0 4 -- Finally transmitting 10, since window opened up (0) 4 4 > [ 02 81 14 1c 08 01 05 45 08 02 81 90 ] 4 4 > Informational frame: 4 > SAPI: 00 C/R: 1 EA: 0 4 > TEI: 064 EA: 1 4 > N(S): 010 0: 0 4 > N(R): 014 P: 0 4 > 8 bytes of data 4 Stopping T_203 timer 4 Starting T_200 timer 4 -- Restarting T200 timer 4 > Protocol Discriminator: Q.931 (8) len=8 4 > Call Ref: len= 1 (reference 5/0x5) (Originator) 4 > Message Type: DISCONNECT (69) 4 > [08 02 81 90] 4 > Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0 Location: Private network serving the local user (1) 4 > Ext: 1 Cause: Normal Clearing (16), class = Normal Event (1) ] 4 q931_hangup: Hanging up 0, winner 0 4 q931_hangup: Slaves 1 -- Hungup 'DAHDI/ISDN-4-4' == Spawn extension (phones, 8200, 1) exited non-zero on 'DAHDI/ISDN-3-4' 3 q931_hangup: other hangup 3 NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Disconnect Indication, peerstate Disconnect Request, hold-state Idle 3 q931.c:4342 q931_release: Call 70 enters state 19 (Release Request). Hold state: Idle 3 Sending message for call 0xb712ea10 on 0x97b1c20 TEI/SAPI 64/0, call->pri is 0x97b1c20, TEI/SAPI 64/0 3 TEI/SAPI: 64/0 state 7 retran 0 busy 0 3 -- Finally transmitting 15, since window opened up (0) 3 3 > [ 02 81 1e 20 08 01 c6 4d 08 02 81 90 ] 3 3 > Informational frame: 3 > SAPI: 00 C/R: 1 EA: 0 3 > TEI: 064 EA: 1 3 > N(S): 015 0: 0 3 > N(R): 016 P: 0 3 > 8 bytes of data 3 Stopping T_203 timer 3 Starting T_200 timer 3 -- Restarting T200 timer 3 > Protocol Discriminator: Q.931 (8) len=8 3 > Call Ref: len= 1 (reference 70/0x46) (Terminator) 3 > Message Type: RELEASE (77) 3 > [08 02 81 90] 3 > Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0 Location: Private network serving the local user (1) 3 > Ext: 1 Cause: Normal Clearing (16), class = Normal Event (1) ] -- Hungup 'DAHDI/ISDN-3-4' 4 x*CLI> 4 < [ 00 81 1c 14 08 01 85 45 08 02 80 90 ] 4 4 < Informational frame: 4 < SAPI: 00 C/R: 0 EA: 0 4 < TEI: 064 EA: 1 4 < N(S): 014 0: 0 4 < N(R): 010 P: 0 4 < 8 bytes of data 4 Handling message for SAPI/TEI=0/64 4 -- Restarting T203 timer 4 -- ACKing all packets from 9 to (but not including) 10 4 -- Stopping T203 counter since we got an ACK 4 -- Waiting for acknowledge, restarting T200 counter 4 -- Restarting T200 timer 4 < Protocol Discriminator: Q.931 (8) len=8 4 < Call Ref: len= 1 (reference 5/0x5) (Terminator) 4 < Message Type: DISCONNECT (69) 4 < [08 02 80 90] 4 < Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0 Location: User (0) 4 < Ext: 1 Cause: Normal Clearing (16), class = Normal Event (1) ] 4 Received message for call 0x97bf440 on 0x97b4ab0 TEI/SAPI 64/0, call->pri is 0x97b4ab0 TEI/SAPI 64/0 4 -- Processing IE 8 (cs0, Cause) 4 q931.c:6048 nt_ptmp_handle_q931_message: Call 32773 enters state 12 (Disconnect Indication). Hold state: Idle 4 q931.c:6704 post_handle_q931_message: Subcall 32773 enters state 12 (Disconnect Indication). Hold state: Idle 4 q931_hangup: Slave hangup 4 NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Disconnect Indication, peerstate Disconnect Request, hold-state Idle 4 q931.c:4342 q931_release: Subcall 32773 enters state 19 (Release Request). Hold state: Idle 4 Sending message for call 0x97bf440 on 0x97b4ab0 TEI/SAPI 64/0, call->pri is 0x97b4ab0, TEI/SAPI 64/0 4 TEI/SAPI: 64/0 state 7 retran 0 busy 0 4 -- Finally transmitting 11, since window opened up (1) 4 4 > [ 02 81 16 1e 08 01 05 4d 08 02 81 90 ] 4 4 > Informational frame: 4 > SAPI: 00 C/R: 1 EA: 0 4 > TEI: 064 EA: 1 4 > N(S): 011 0: 0 4 > N(R): 015 P: 0 4 > 8 bytes of data 4 Starting T_200 timer 4 -- Restarting T200 timer 4 > Protocol Discriminator: Q.931 (8) len=8 4 > Call Ref: len= 1 (reference 5/0x5) (Originator) 4 > Message Type: RELEASE (77) 4 > [08 02 81 90] 4 > Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0 Location: Private network serving the local user (1) 4 > Ext: 1 Cause: Normal Clearing (16), class = Normal Event (1) ] 4 x*CLI> 4 < [ 02 81 01 16 ] 4 4 < Supervisory frame: 4 < SAPI: 00 C/R: 1 EA: 0 4 < TEI: 064 EA: 1 4 < Zero: 0 S: 0 01: 1 [ RR (receive ready) ] 4 < N(R): 011 P/F: 0 4 < 0 bytes of data 4 Handling message for SAPI/TEI=0/64 4 -- Restarting T203 timer 4 -- ACKing all packets from 9 to (but not including) 11 4 -- ACKing packet 10, new txqueue is 11 (-1 means empty) 4 -- Stopping T203 counter since we got an ACK 4 -- Waiting for acknowledge, restarting T200 counter 4 -- Restarting T200 timer 3 x*CLI> 3 < [ 02 81 01 20 ] 3 3 < Supervisory frame: 3 < SAPI: 00 C/R: 1 EA: 0 3 < TEI: 064 EA: 1 3 < Zero: 0 S: 0 01: 1 [ RR (receive ready) ] 3 < N(R): 016 P/F: 0 3 < 0 bytes of data 3 Handling message for SAPI/TEI=0/64 3 -- Restarting T203 timer 3 -- ACKing all packets from 14 to (but not including) 16 3 -- ACKing packet 15, new txqueue is -1 (-1 means empty) 3 -- Since there was nothing left, stopping T200 counter 3 -- Stopping T203 counter since we got an ACK 3 -- Nothing left, starting T203 counter 3 x*CLI> 3 < [ 00 81 20 20 08 01 46 5a ] 3 3 < Informational frame: 3 < SAPI: 00 C/R: 0 EA: 0 3 < TEI: 064 EA: 1 3 < N(S): 016 0: 0 3 < N(R): 016 P: 0 3 < 4 bytes of data 3 Handling message for SAPI/TEI=0/64 3 -- Restarting T203 timer 3 -- ACKing all packets from 15 to (but not including) 16 3 -- Since there was nothing left, stopping T200 counter 3 -- Stopping T203 counter since we got an ACK 3 -- Nothing left, starting T203 counter 3 < Protocol Discriminator: Q.931 (8) len=4 3 < Call Ref: len= 1 (reference 70/0x46) (Originator) 3 < Message Type: RELEASE COMPLETE (90) 3 Received message for call 0xb712ea10 on 0x97b1c20 TEI/SAPI 64/0, call->pri is 0x97b1c20 TEI/SAPI 64/0 3 q931.c:6586 post_handle_q931_message: Call 70 enters state 0 (Null). Hold state: Idle 3 q931_hangup: other hangup 3 NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Null, hold-state Idle 3 NEW_HANGUP DEBUG: Destroying the call, ourstate Null, peerstate Null, hold-state Idle 3 Sending Receiver Ready (17) 3 3 > [ 00 81 01 22 ] 3 3 > Supervisory frame: 3 > SAPI: 00 C/R: 0 EA: 0 3 > TEI: 064 EA: 1 3 > Zero: 0 S: 0 01: 1 [ RR (receive ready) ] 3 > N(R): 017 P/F: 0 3 > 0 bytes of data 4 x*CLI> 4 < [ 02 81 01 18 ] 4 4 < Supervisory frame: 4 < SAPI: 00 C/R: 1 EA: 0 4 < TEI: 064 EA: 1 4 < Zero: 0 S: 0 01: 1 [ RR (receive ready) ] 4 < N(R): 012 P/F: 0 4 < 0 bytes of data 4 Handling message for SAPI/TEI=0/64 4 -- Restarting T203 timer 4 -- ACKing all packets from 10 to (but not including) 12 4 -- ACKing packet 11, new txqueue is -1 (-1 means empty) 4 -- Since there was nothing left, stopping T200 counter 4 -- Stopping T203 counter since we got an ACK 4 -- Nothing left, starting T203 counter 4 x*CLI> 4 < [ 00 81 1e 18 08 01 85 4d 08 02 80 90 ] 4 4 < Informational frame: 4 < SAPI: 00 C/R: 0 EA: 0 4 < TEI: 064 EA: 1 4 < N(S): 015 0: 0 4 < N(R): 012 P: 0 4 < 8 bytes of data 4 Handling message for SAPI/TEI=0/64 4 -- Restarting T203 timer 4 -- ACKing all packets from 11 to (but not including) 12 4 -- Since there was nothing left, stopping T200 counter 4 -- Stopping T203 counter since we got an ACK 4 -- Nothing left, starting T203 counter 4 < Protocol Discriminator: Q.931 (8) len=8 4 < Call Ref: len= 1 (reference 5/0x5) (Terminator) 4 < Message Type: RELEASE (77) 4 < [08 02 80 90] 4 < Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0 Location: User (0) 4 < Ext: 1 Cause: Normal Clearing (16), class = Normal Event (1) ] 4 Received message for call 0x97bf440 on 0x97b4ab0 TEI/SAPI 64/0, call->pri is 0x97b4ab0 TEI/SAPI 64/0 4 -- Processing IE 8 (cs0, Cause) 4 q931.c:6048 nt_ptmp_handle_q931_message: Call 32773 enters state 0 (Null). Hold state: Idle 4 q931.c:6626 post_handle_q931_message: Subcall 32773 enters state 0 (Null). Hold state: Idle 4 Sending Receiver Ready (16) 4 4 > [ 00 81 01 20 ] 4 4 > Supervisory frame: 4 > SAPI: 00 C/R: 0 EA: 0 4 > TEI: 064 EA: 1 4 > Zero: 0 S: 0 01: 1 [ RR (receive ready) ] 4 > N(R): 016 P/F: 0 4 > 0 bytes of data 4 NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Null, hold-state Idle 4 Destroying subcall 0x97bf440 of call 0x97beb60 at 0 4 Since we already had a winner, we should just be able to kill the call anyways 4 NEW_HANGUP DEBUG: Destroying the call, ourstate Null, peerstate Call Present, hold-state Idle 4 q931_hangup: Hanging up 0, winner 0 4 q931_hangup: Slaves 1