> [ 00 01 01 01 ] > Supervisory frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 000 EA: 1 > Zero: 0 S: 0 01: 1 [ RR (receive ready) ] > N(R): 000 P/F: 1 > 0 bytes of data chch1*CLI> < [ 00 01 01 01 ] < Supervisory frame: < SAPI: 00 C/R: 0 EA: 0 < TEI: 000 EA: 1 < Zero: 0 S: 0 01: 1 [ RR (receive ready) ] < N(R): 000 P/F: 1 < 0 bytes of data Handling message for SAPI/TEI=0/0 -- ACKing all packets from 0 to (but not including) 0 -- Since there was nothing left, stopping T200 counter -- Stopping T203 counter since we got an ACK -- Nothing left, starting T203 counter -- Got RR response to our frame -- Restarting T203 timer chch1*CLI> < [ 02 01 00 00 08 02 00 fe 05 04 03 80 90 a3 18 03 a1 83 81 1e 02 a1 90 6c 05 00 80 38 35 35 70 05 80 38 33 39 39 7c 02 90 90 7d 02 91 81 9d 32 01 80 ] < Informational frame: < SAPI: 00 C/R: 1 EA: 0 < TEI: 000 EA: 1 < N(S): 000 0: 0 < N(R): 000 P: 0 < 45 bytes of data Handling message for SAPI/TEI=0/0 -- ACKing all packets from 0 to (but not including) 0 -- Since there was nothing left, stopping T200 counter -- Stopping T203 counter since we got an ACK -- Nothing left, starting T203 counter < Protocol Discriminator: Q.931 (8) len=45 < Call Ref: len= 2 (reference 254/0xFE) (Originator) < Message type: SETUP (5) < [04 03 80 90 a3] < Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer capability: Speech (0) < Ext: 1 Trans mode/rate: 64kbps, circuit-mode (16) < User information layer 1: A-Law (35) < [18 03 a1 83 81] < Channel ID (len= 5) [ Ext: 1 IntID: Implicit PRI Spare: 0 Preferred Dchan: 0 < ChanSel: As indicated in following octets < Ext: 1 Coding: 0 Number Specified Channel Type: 3 < Ext: 1 Channel: 1 ] < [1e 02 a1 90] < Progress Indicator (len= 4) [ Ext: 1 Coding: Non-ITU international standard (1) 0: 0 Location: Private network serving the local user (1) < Ext: 1 Progress Description: Interworking with a public network. (16) ] < [6c 05 00 80 38 35 35] < Calling Number (len= 7) [ Ext: 0 TON: Unknown Number Type (0) NPI: Unknown Number Plan (0) < Presentation: Presentation permitted, user number not screened (0) '855' ] < [70 05 80 38 33 39 39] < Called Number (len= 7) [ Ext: 1 TON: Unknown Number Type (0) NPI: Unknown Number Plan (0) '8399' ] < [7c 02 90 90] < IE: Low-layer Compatibility (len = 4) < [7d 02 91 81] < IE: High-layer Compatibility (len = 4) < [9d] < Non-Locking Shift (len=01): Requested codeset 5 < [32 01 80] [Jul 14 22:00:09] ERROR[3789]: chan_dahdi.c:11086 dahdi_pri_error: !! < Unknown IE 50 (cs5, len = 3) -- Making new call for cr 254 -- Processing Q.931 Call Setup -- Processing IE 4 (cs0, Bearer Capability) -- Processing IE 24 (cs0, Channel Identification) -- Processing IE 30 (cs0, Progress Indicator) -- Processing IE 108 (cs0, Calling Party Number) -- Processing IE 112 (cs0, Called Party Number) -- Processing IE 124 (cs0, Low-layer Compatibility) -- Processing IE 125 (cs0, High-layer Compatibility) -- Processing IE 50 (cs5, Unknown Information Element) !! Unknown IE 50 (cs5, Unknown Information Element) q931.c:3545 q931_receive: call 254 on channel 1 enters state 6 (Call Present) Sending Receiver Ready (1) > [ 02 01 01 02 ] > Supervisory frame: > SAPI: 00 C/R: 1 EA: 0 > TEI: 000 EA: 1 > Zero: 0 S: 0 01: 1 [ RR (receive ready) ] > N(R): 001 P/F: 0 > 0 bytes of data -- Restarting T203 timer q931.c:2810 q931_call_proceeding: call 254 on channel 1 enters state 9 (Incoming Call Proceeding) > [ 00 01 00 02 08 02 80 fe 02 18 03 a9 83 81 ] > Informational frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 000 EA: 1 > N(S): 000 0: 0 > N(R): 001 P: 0 > 10 bytes of data Stopping T_203 timer Starting T_200 timer -- Restarting T200 timer > Protocol Discriminator: Q.931 (8) len=10 > Call Ref: len= 2 (reference 254/0xFE) (Terminator) > Message type: CALL PROCEEDING (2) > [18 03 a9 83 81] > Channel ID (len= 5) [ Ext: 1 IntID: Implicit PRI Spare: 0 Exclusive Dchan: 0 > ChanSel: As indicated in following octets > Ext: 1 Coding: 0 Number Specified Channel Type: 3 > Ext: 1 Channel: 1 ] -- Accepting call from '855' to '8399' on channel 0/1, span 1 -- Executing [8399@incoming:1] NoOp("DAHDI/1-1", "855") in new stack -- Executing [8399@incoming:2] Progress("DAHDI/1-1", "") in new stack chch1*CLI> > [ 00 01 02 02 08 02 80 fe 03 1e 02 81 88 ] > Informational frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 000 EA: 1 > N(S): 001 0: 0 > N(R): 001 P: 0 > 9 bytes of data Starting T_200 timer -- Restarting T200 timer > Protocol Discriminator: Q.931 (8) len=9 > Call Ref: len= 2 (reference 254/0xFE) (Terminator) > Message type: PROGRESS (3) > [1e 02 81 88] > Progress Indicator (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location: Private network serving the local user (1) > Ext: 1 Progress Description: Inband information or appropriate pattern now available. (8) ] -- Executing [8399@incoming:3] Answer("DAHDI/1-1", "") in new stack q931.c:2943 q931_connect: call 254 on channel 1 enters state 10 (Active) > [ 00 01 04 02 08 02 80 fe 07 18 03 a9 83 81 1e 02 81 82 ] > Informational frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 000 EA: 1 > N(S): 002 0: 0 > N(R): 001 P: 0 > 14 bytes of data Starting T_200 timer -- Restarting T200 timer > Protocol Discriminator: Q.931 (8) len=14 > Call Ref: len= 2 (reference 254/0xFE) (Terminator) > Message type: CONNECT (7) > [18 03 a9 83 81] > Channel ID (len= 5) [ Ext: 1 IntID: Implicit PRI Spare: 0 Exclusive Dchan: 0 > ChanSel: As indicated in following octets > Ext: 1 Coding: 0 Number Specified Channel Type: 3 > Ext: 1 Channel: 1 ] > [1e 02 81 82] > Progress Indicator (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location: Private network serving the local user (1) > Ext: 1 Progress Description: Called equipment is non-ISDN. (2) ] -- Executing [8399@incoming:4] Wait("DAHDI/1-1", "2") in new stack chch1*CLI> < [ 00 01 01 02 ] < Supervisory frame: < SAPI: 00 C/R: 0 EA: 0 < TEI: 000 EA: 1 < Zero: 0 S: 0 01: 1 [ RR (receive ready) ] < N(R): 001 P/F: 0 < 0 bytes of data Handling message for SAPI/TEI=0/0 -- ACKing all packets from 0 to (but not including) 1 -- ACKing packet 0, new txqueue is 1 (-1 means empty) -- Waiting for acknowledge, restarting T200 counter -- Restarting T200 timer -- Restarting T203 timer chch1*CLI> < [ 00 01 01 04 ] < Supervisory frame: < SAPI: 00 C/R: 0 EA: 0 < TEI: 000 EA: 1 < Zero: 0 S: 0 01: 1 [ RR (receive ready) ] < N(R): 002 P/F: 0 < 0 bytes of data Handling message for SAPI/TEI=0/0 -- ACKing all packets from 0 to (but not including) 2 -- ACKing packet 1, new txqueue is 2 (-1 means empty) -- Stopping T203 counter since we got an ACK -- Waiting for acknowledge, restarting T200 counter -- Restarting T200 timer -- Restarting T203 timer chch1*CLI> < [ 00 01 01 06 ] < Supervisory frame: < SAPI: 00 C/R: 0 EA: 0 < TEI: 000 EA: 1 < Zero: 0 S: 0 01: 1 [ RR (receive ready) ] < N(R): 003 P/F: 0 < 0 bytes of data Handling message for SAPI/TEI=0/0 -- ACKing all packets from 1 to (but not including) 3 -- ACKing packet 2, new txqueue is -1 (-1 means empty) -- Since there was nothing left, stopping T200 counter -- Stopping T203 counter since we got an ACK -- Nothing left, starting T203 counter -- Restarting T203 timer chch1*CLI> < [ 02 01 02 06 08 02 00 fe 0f ] < Informational frame: < SAPI: 00 C/R: 1 EA: 0 < TEI: 000 EA: 1 < N(S): 001 0: 0 < N(R): 003 P: 0 < 5 bytes of data Handling message for SAPI/TEI=0/0 -- ACKing all packets from 2 to (but not including) 3 -- Since there was nothing left, stopping T200 counter -- Stopping T203 counter since we got an ACK -- Nothing left, starting T203 counter < Protocol Discriminator: Q.931 (8) len=5 < Call Ref: len= 2 (reference 254/0xFE) (Originator) < Message type: CONNECT ACKNOWLEDGE (15) Sending Receiver Ready (2) > [ 02 01 01 04 ] > Supervisory frame: > SAPI: 00 C/R: 1 EA: 0 > TEI: 000 EA: 1 > Zero: 0 S: 0 01: 1 [ RR (receive ready) ] > N(R): 002 P/F: 0 > 0 bytes of data -- Restarting T203 timer T203 counter expired, sending RR and scheduling T203 again Sending Receiver Ready (2) > [ 00 01 01 05 ] > Supervisory frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 000 EA: 1 > Zero: 0 S: 0 01: 1 [ RR (receive ready) ] > N(R): 002 P/F: 1 > 0 bytes of data chch1*CLI> < [ 00 01 01 07 ] < Supervisory frame: < SAPI: 00 C/R: 0 EA: 0 < TEI: 000 EA: 1 < Zero: 0 S: 0 01: 1 [ RR (receive ready) ] < N(R): 003 P/F: 1 < 0 bytes of data Handling message for SAPI/TEI=0/0 -- ACKing all packets from 2 to (but not including) 3 -- Since there was nothing left, stopping T200 counter -- Stopping T203 counter since we got an ACK -- Nothing left, starting T203 counter -- Got RR response to our frame -- Restarting T203 timer -- Executing [8399@incoming:5] NoOp("DAHDI/1-1", "") in new stack -- Executing [8399@incoming:6] GotoIf("DAHDI/1-1", "0?unavail") in new stack -- Executing [8399@incoming:7] VoiceMailMain("DAHDI/1-1", "") in new stack -- Playing 'vm-login.gsm' (language 'en') chch1*CLI> < [ 02 01 04 06 08 02 00 fe 45 08 02 81 90 ] < Informational frame: < SAPI: 00 C/R: 1 EA: 0 < TEI: 000 EA: 1 < N(S): 002 0: 0 < N(R): 003 P: 0 < 9 bytes of data Handling message for SAPI/TEI=0/0 -- ACKing all packets from 2 to (but not including) 3 -- Since there was nothing left, stopping T200 counter -- Stopping T203 counter since we got an ACK -- Nothing left, starting T203 counter < Protocol Discriminator: Q.931 (8) len=9 < Call Ref: len= 2 (reference 254/0xFE) (Originator) < Message type: DISCONNECT (69) < [08 02 81 90] < Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0 Location: Private network serving the local user (1) < Ext: 1 Cause: Normal Clearing (16), class = Normal Event (1) ] -- Processing IE 8 (cs0, Cause) q931.c:3820 q931_receive: call 254 on channel 1 enters state 12 (Disconnect Indication) Sending Receiver Ready (3) > [ 02 01 01 06 ] > Supervisory frame: > SAPI: 00 C/R: 1 EA: 0 > TEI: 000 EA: 1 > Zero: 0 S: 0 01: 1 [ RR (receive ready) ] > N(R): 003 P/F: 0 > 0 bytes of data -- Restarting T203 timer -- Channel 0/1, span 1 got hangup request, cause 16 [Jul 14 22:00:17] WARNING[3828]: app_voicemail.c:8741 vm_authenticate: Couldn't read username NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Disconnect Indication, peerstate Disconnect Request q931.c:2961 q931_release: call 254 on channel 1 enters state 19 (Release Request) > [ 00 01 06 06 08 02 80 fe 4d 08 02 81 90 ] > Informational frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 000 EA: 1 > N(S): 003 0: 0 > N(R): 003 P: 0 > 9 bytes of data Stopping T_203 timer Starting T_200 timer -- Restarting T200 timer > Protocol Discriminator: Q.931 (8) len=9 > Call Ref: len= 2 (reference 254/0xFE) (Terminator) > Message type: RELEASE (77) > [08 02 81 90] > Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0 Location: Private network serving the local user (1) > Ext: 1 Cause: Normal Clearing (16), class = Normal Event (1) ] -- Hungup 'DAHDI/1-1' chch1*CLI> < [ 00 01 01 08 ] < Supervisory frame: < SAPI: 00 C/R: 0 EA: 0 < TEI: 000 EA: 1 < Zero: 0 S: 0 01: 1 [ RR (receive ready) ] < N(R): 004 P/F: 0 < 0 bytes of data Handling message for SAPI/TEI=0/0 -- ACKing all packets from 2 to (but not including) 4 -- ACKing packet 3, new txqueue is -1 (-1 means empty) -- Since there was nothing left, stopping T200 counter -- Nothing left, starting T203 counter -- Restarting T203 timer chch1*CLI> < [ 02 01 06 08 08 02 00 fe 5a 08 02 81 90 ] < Informational frame: < SAPI: 00 C/R: 1 EA: 0 < TEI: 000 EA: 1 < N(S): 003 0: 0 < N(R): 004 P: 0 < 9 bytes of data Handling message for SAPI/TEI=0/0 -- ACKing all packets from 3 to (but not including) 4 -- Since there was nothing left, stopping T200 counter -- Stopping T203 counter since we got an ACK -- Nothing left, starting T203 counter < Protocol Discriminator: Q.931 (8) len=9 < Call Ref: len= 2 (reference 254/0xFE) (Originator) < Message type: RELEASE COMPLETE (90) < [08 02 81 90] < Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0 Location: Private network serving the local user (1) < Ext: 1 Cause: Normal Clearing (16), class = Normal Event (1) ] -- Processing IE 8 (cs0, Cause) q931.c:3760 q931_receive: call 254 on channel 1 enters state 0 (Null) NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Null NEW_HANGUP DEBUG: Destroying the call, ourstate Null, peerstate Null Sending Receiver Ready (4) > [ 02 01 01 08 ] > Supervisory frame: > SAPI: 00 C/R: 1 EA: 0 > TEI: 000 EA: 1 > Zero: 0 S: 0 01: 1 [ RR (receive ready) ] > N(R): 004 P/F: 0 > 0 bytes of data -- Restarting T203 timer T203 counter expired, sending RR and scheduling T203 again Sending Receiver Ready (4) > [ 00 01 01 09 ] > Supervisory frame: > SAPI: 00 C/R: 0 EA: 0 > TEI: 000 EA: 1 > Zero: 0 S: 0 01: 1 [ RR (receive ready) ] > N(R): 004 P/F: 1 > 0 bytes of data chch1*CLI> < [ 00 01 01 09 ] < Supervisory frame: < SAPI: 00 C/R: 0 EA: 0 < TEI: 000 EA: 1 < Zero: 0 S: 0 01: 1 [ RR (receive ready) ] < N(R): 004 P/F: 1 < 0 bytes of data Handling message for SAPI/TEI=0/0 -- ACKing all packets from 3 to (but not including) 4 -- Since there was nothing left, stopping T200 counter -- Stopping T203 counter since we got an ACK -- Nothing left, starting T203 counter -- Got RR response to our frame -- Restarting T203 timer chch1*CLI>