dahdi: Telephony Interface Registered on major 196
dahdi: Version: 2.0.0
ACPI: PCI Interrupt 0000:18:08.0[A] -> GSI 19 (level, low) -> IRQ 19
Found TE4XXP at base address fdff0000, remapped to f88e8000
TE4XXP version c01a016a, burst ON
Octasic optimized!
FALC version: 00000005, Board ID: 00
Reg 0: 0x364a0400
Reg 1: 0x364a0000
Reg 2: 0xffffffff
Reg 3: 0x00000000
Reg 4: 0x0000ff01
Reg 5: 0x00000000
Reg 6: 0xc01a016a
Reg 7: 0x00001f00
Reg 8: 0x00000000
Reg 9: 0x00ff00ff
Reg 10: 0x0000004a
Not prepped yet!
TE4XXP: Launching card: 0
TE4XXP: Setting up global serial parameters
Found a Wildcard: Wildcard TE420 (4th Gen)
About to enter spanconfig!
Done with spanconfig!
About to enter spanconfig!
Done with spanconfig!
About to enter spanconfig!
Done with spanconfig!
About to enter spanconfig!
Done with spanconfig!
dahdi: Registered tone zone 9 (Austria)
About to enter startup!
TE4XXP: Span 1 configured for CCS/HDB3/CRC4
wct4xxp: Setting yellow alarm on span 1
timing source auto card 0!
SPAN 1: Primary Sync Source
timing source auto card 0!
VPM400: Not Present
firmware: requesting dahdi-fw-oct6114-128.bin
VPM450: echo cancellation for 128 channels
VPM450: hardware DTMF disabled.
VPM450: Present and operational servicing 4 span(s)
Completed startup!
About to enter startup!
TE4XXP: Span 2 configured for CCS/HDB3/CRC4
wct4xxp: Setting yellow alarm on span 2
SPAN 2: Secondary Sync Source
Completed startup!
About to enter startup!
TE4XXP: Span 3 configured for CCS/HDB3/CRC4
timing source auto card 0!
wct4xxp: Setting yellow alarm on span 3
SPAN 3: Tertiary Sync Source
Completed startup!
About to enter startup!
TE4XXP: Span 4 configured for CCS/HDB3/CRC4
timing source auto card 0!
wct4xxp: Setting yellow alarm on span 4
SPAN 4: Quaternary Sync Source
Completed startup!
timing source auto card 0!
wct4xxp: Clearing yellow alarm on span 1