[Home]

Summary:DAHLIN-00193: Dahdi restart boot one port in TE or NT mode randomly with Beronet B8NS0
Reporter:Sergio Serrano (srsergio)Labels:
Date Opened:2010-05-31 11:19:32Date Closed:2010-06-04 10:17:09
Priority:MajorRegression?No
Status:Closed/CompleteComponents:wcb4xxp
Versions:2.3.0 Frequency of
Occurrence
Related
Issues:
Environment:Attachments:
Description:With a 8 Port Beronet BRI Card, Asterisk 1.6.0 and dahdi 2.3.0, when you do /etc/init.d/dahdi restart you obtain one port in NT or TE ramdonly.



****** ADDITIONAL INFORMATION ******

/etc/dahdi/system.conf ->

span=1,1,0,ccs,ami
bchan=1-2
hardhdlc=3
echocanceller=mg2,1-2

span=2,2,0,ccs,ami
bchan=4-5
hardhdlc=6
echocanceller=mg2,4-5

span=3,3,0,ccs,ami
bchan=7-8
hardhdlc=9
echocanceller=mg2,7-8

span=4,4,0,ccs,ami
bchan=10-11
hardhdlc=12
echocanceller=mg2,10-11

span=5,5,0,ccs,ami
bchan=13-14
hardhdlc=15
echocanceller=mg2,13-14

span=6,6,0,ccs,ami
bchan=16-17
hardhdlc=18
echocanceller=mg2,16-17

span=7,7,0,ccs,ami
bchan=19-20
hardhdlc=21
echocanceller=mg2,19-20

span=8,8,0,ccs,ami
bchan=22-23
hardhdlc=24
echocanceller=mg2,22-23

loadzone        = es
defaultzone     = es

dmesg output:

[27125.734463] dahdi: Telephony Interface Unloaded
[27125.778181] dahdi: Telephony Interface Registered on major 196
[27125.778191] dahdi: Version: 2.3.0
[27125.799853] wcb4xxp 0000:00:09.0: probe called for b4xx...
[27125.799889] ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 17 (level, low) -> IRQ 17
[27125.800153] wcb4xxp 0000:00:09.0: Identified BeroNet BN8S0 (controller rev 1) at 0001d000, IRQ 17
[27125.801665] wcb4xxp 0000:00:09.0: NOTE: hardware echo cancellation has been disabled
[27125.801914] wcb4xxp 0000:00:09.0: Port 1: TE mode
[27125.802032] wcb4xxp 0000:00:09.0: Port 2: TE mode
[27125.802148] wcb4xxp 0000:00:09.0: Port 3: TE mode
[27125.802264] wcb4xxp 0000:00:09.0: Port 4: TE mode
[27125.802380] wcb4xxp 0000:00:09.0: Port 5: TE mode
[27125.802496] wcb4xxp 0000:00:09.0: Port 6: TE mode
[27125.802611] wcb4xxp 0000:00:09.0: Port 7: TE mode
[27125.802727] wcb4xxp 0000:00:09.0: Port 8: TE mode
[27125.803584] wcb4xxp 0000:00:09.0: Did not do the highestorder stuff
[27125.903629] wcb4xxp 0000:00:09.0: new card sync source: port 3
[27132.197451] ACPI: PCI interrupt for device 0000:00:09.0 disabled
[27132.197462] wcb4xxp 0000:00:09.0: Driver unloaded.
[27132.205301] dahdi: Telephony Interface Unloaded
[27132.252569] dahdi: Telephony Interface Registered on major 196
[27132.252579] dahdi: Version: 2.3.0
[27132.270768] wcb4xxp 0000:00:09.0: probe called for b4xx...
[27132.270803] ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 17 (level, low) -> IRQ 17
[27132.270996] wcb4xxp 0000:00:09.0: Identified BeroNet BN8S0 (controller rev 1) at 0001d000, IRQ 17
[27132.272471] wcb4xxp 0000:00:09.0: NOTE: hardware echo cancellation has been disabled
[27132.272720] wcb4xxp 0000:00:09.0: Port 1: TE mode
[27132.272838] wcb4xxp 0000:00:09.0: Port 2: NT mode
[27132.272954] wcb4xxp 0000:00:09.0: Port 3: TE mode
[27132.273070] wcb4xxp 0000:00:09.0: Port 4: TE mode
[27132.273186] wcb4xxp 0000:00:09.0: Port 5: TE mode
[27132.273301] wcb4xxp 0000:00:09.0: Port 6: TE mode
[27132.273417] wcb4xxp 0000:00:09.0: Port 7: TE mode
[27132.273533] wcb4xxp 0000:00:09.0: Port 8: TE mode
[27132.274358] wcb4xxp 0000:00:09.0: Did not do the highestorder stuff
[27132.374465] wcb4xxp 0000:00:09.0: new card sync source: port 3
Comments:By: andre valentin (avalentin) 2010-05-31 14:12:13

I can also reproduce this error with my BN8S0. I fixed it by setting port mode on module insert (patched source).
By: Sergio Serrano (srsergio) 2010-06-02 06:19:35

We can reproduce this issue in three installation more.

Dou you need some information more?
By: Sergio Serrano (srsergio) 2010-06-02 08:04:50

We make test with Beronet Cards of 2 and 4 ports and this issue can't be reproduced in this kind of cars. It's seem and issue related with only Beronet 8 ports Cards.
By: Russell Bryant (russell) 2010-06-04 10:17:08

Please contact your hardware vendor for additional assistance with this issue.