[Home]

Summary:ASTERISK-13714: Asterisk says: "No DAHDI Transcoders found.", but dahdi_transcode module reports 1 transcoder
Reporter:Walter Klomp (xblurone)Labels:
Date Opened:2009-03-09 01:02:17Date Closed:2009-03-11 09:50:08
Priority:MajorRegression?No
Status:Closed/CompleteComponents:Codecs/General
Versions:Frequency of
Occurrence
Related
Issues:
Environment:Attachments:
Description:Hi,

I have compiled various versions of Dahdi Linux and asterisk (1.4 and 1.6), and even Digium support has compiled the latest Dahdi-SVN & Asterisk-1.4-svn, to no avail. Dmesg shows happily the drivers loaded and the transcoder also ready, however asterisk does not seem to agree.

By the way, asterisk does NOT report that /dev/dahdi/transcoder cannot be opened, so there is no error there.

I can only conclude this is a bug... Anything else I can help to fast-track the resolve of this issue?

****** ADDITIONAL INFORMATION ******

Dmesg shows:

Linux version 2.6.18-92.1.17.el5 (mockbuild@builder16.centos.org) (gcc version 4.1.2 20071124 (Red Hat 4.1.2-42)) #1 SMP Tue Nov 4 13:45:01 EST 2008
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003ffcd540 (usable)
BIOS-e820: 000000003ffcd540 - 000000003ffd0000 (ACPI data)
BIOS-e820: 000000003ffd0000 - 0000000040000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
127MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 0009dd40
Memory for crash kernel (0x0 to 0x0) notwithin permissible range
disabling kdump
Using x86 segment limits to approximate NX protection
On node 0 totalpages: 262093
 DMA zone: 4096 pages, LIFO batch:0
 Normal zone: 225280 pages, LIFO batch:31
 HighMem zone: 32717 pages, LIFO batch:7
DMI 2.3 present.
Using APIC driver default
ACPI: RSDP (v000 IBM                                   ) @ 0x000fdfc0
ACPI: RSDT (v001 IBM    SERONYXP 0x00001000 IBM  0x45444f43) @ 0x3ffcff80
ACPI: FADT (v001 IBM    SERONYXP 0x00001000 IBM  0x45444f43) @ 0x3ffcff00
ACPI: MADT (v001 IBM    SERONYXP 0x00001000 IBM  0x45444f43) @ 0x3ffcfe40
ACPI: MCFG (v001 IBM    SERONYXP 0x00001000 IBM  0x45444f43) @ 0x3ffcfe00
ACPI: SSDT (v001 IBM    YETA0    0x00001000 INTL 0x02002025) @ 0x3ffcfb00
ACPI: DSDT (v001 IBM    SERTURQU 0x00001000 INTL 0x02002025) @ 0x00000000
ACPI: PM-Timer IO Port: 0x588
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:4 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 15:4 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x0e] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 14, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x0d] address[0xfec84000] gsi_base[24])
IOAPIC[1]: apic_id 13, version 32, address 0xfec84000, GSI 24-47
ACPI: IOAPIC (id[0x0c] address[0xfec84400] gsi_base[48])
IOAPIC[2]: apic_id 12, version 32, address 0xfec84400, GSI 48-71
ACPI: IOAPIC (id[0x0b] address[0xfec80000] gsi_base[72])
IOAPIC[3]: apic_id 11, version 32, address 0xfec80000, GSI 72-95
ACPI: IOAPIC (id[0x0a] address[0xfec80400] gsi_base[96])
IOAPIC[4]: apic_id 10, version 32, address 0xfec80400, GSI 96-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode:  Flat.  Using 5 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
Detected 3000.275 MHz processor.
Built 1 zonelists.  Total pages: 262093
Kernel command line: ro root=LABEL=/1
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
mapped IOAPIC to ffffb000 (fec84000)
mapped IOAPIC to ffffa000 (fec84400)
mapped IOAPIC to ffff9000 (fec80000)
mapped IOAPIC to ffff8000 (fec80400)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c074c000 soft=c072c000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1031924k/1048372k available (2096k kernel code, 15620k reserved, 877k data, 228k init, 130868k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 6003.44 BogoMIPS (lpj=3001722)
Security Framework v1.0.0 initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
selinux_register_security:  Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000641d 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 20000000 00000000 00000000 0000641d 00000000 00000000
monitor/mwait feature present.
using mwait in idle threads.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: After all inits, caps: bfebf3ff 20000000 00000000 00000180 0000641d 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (24) available
CPU0: Thermal monitoring enabled
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
ACPI: Core revision 20060707
CPU0: Intel(R) Xeon(TM) CPU 3.00GHz stepping 03
SMP alternatives: switching to SMP code
Booting processor 1/1 eip 3000
CPU 1 irqstacks, hard=c074d000 soft=c072d000
Initializing CPU#1
Calibrating delay using timer specific routine.. 5999.36 BogoMIPS (lpj=2999684)
CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000641d 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 20000000 00000000 00000000 0000641d 00000000 00000000
monitor/mwait feature present.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: After all inits, caps: bfebf3ff 20000000 00000000 00000180 0000641d 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel P4/Xeon Extended MCE MSRs (24) available
CPU1: Thermal monitoring enabled
CPU1: Intel(R) Xeon(TM) CPU 3.00GHz stepping 03
Total of 2 processors activated (12002.81 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking TSC synchronization across 2 CPUs: passed.
Brought up 2 CPUs
sizeof(vma)=84 bytes
sizeof(page)=32 bytes
sizeof(inode)=340 bytes
sizeof(dentry)=136 bytes
sizeof(ext3inode)=492 bytes
sizeof(buffer_head)=52 bytes
sizeof(skbuff)=172 bytes
migration_cost=26
checking if image is initramfs... it is
Freeing initrd memory: 2509k freed
NET: Registered protocol family 16
No dock devices found.
ACPI: bus type pci registered
PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
PCI: Not using MMCONFIG.
PCI: PCI BIOS revision 2.10 entry at 0xfd70e, last bus=9
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI quirk: region 0580-05ff claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region 0400-043f claimed by ICH4 GPIO
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: PXH quirk detected, disabling MSI for SHPC device
PCI: PXH quirk detected, disabling MSI for SHPC device
Boot video device is 0000:01:06.0
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1.PCI8._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1.PCI9._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI5.PCI6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI5.PCI7._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIS._PRT]
ACPI: PCI Interrupt Link [LP00] (IRQs *3)
ACPI: PCI Interrupt Link [LP01] (IRQs *11)
ACPI: PCI Interrupt Link [LP02] (IRQs *7)
ACPI: PCI Interrupt Link [LP03] (IRQs *5)
ACPI: PCI Interrupt Link [LP04] (IRQs *11)
ACPI: Blank IRQ resource
ACPI: Resource is not an IRQ entry
ACPI: PCI Interrupt Link [LP05] (IRQs) *0, disabled.
ACPI: Blank IRQ resource
ACPI: Resource is not an IRQ entry
ACPI: PCI Interrupt Link [LP06] (IRQs) *0, disabled.
ACPI: PCI Interrupt Link [LP07] (IRQs *7)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 16 devices
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
PCI: Cannot allocate resource region 1 of device 0000:00:00.0
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
pnp: 00:01: ioport range 0x520-0x53f has been reserved
pnp: 00:01: ioport range 0x540-0x547 has been reserved
pnp: 00:0d: ioport range 0x400-0x43f has been reserved
PCI: Bridge: 0000:02:00.0
 IO window: disabled.
 MEM window: ce000000-cfffffff
 PREFETCH window: disabled.
PCI: Bridge: 0000:02:00.2
 IO window: disabled.
 MEM window: cc000000-cdffffff
 PREFETCH window: disabled.
PCI: Bridge: 0000:00:02.0
 IO window: disabled.
 MEM window: cc000000-cfffffff
 PREFETCH window: disabled.
PCI: Bridge: 0000:00:04.0
 IO window: disabled.
 MEM window: ca000000-cbffffff
 PREFETCH window: disabled.
PCI: Bridge: 0000:00:05.0
 IO window: disabled.
 MEM window: c8000000-c9ffffff
 PREFETCH window: disabled.
PCI: mem resource ASTERISK-5:100000@c4000000 for 0000:07:00.2 was not allocated.
PCI: Bridge: 0000:07:00.0
 IO window: 4000-4fff
 MEM window: c6000000-c7ffffff
 PREFETCH window: c3000000-c3ffffff
PCI: Bridge: 0000:07:00.2
 IO window: 5000-ffff
 MEM window: c4000000-c5ffffff
 PREFETCH window: disabled.
PCI: Bridge: 0000:00:06.0
 IO window: 4000-ffff
 MEM window: c4000000-c7ffffff
 PREFETCH window: c3000000-c3ffffff
PCI: Bridge: 0000:00:1e.0
 IO window: 3000-3fff
 MEM window: de000000-dfffffff
 PREFETCH window: d0000000-ddffffff
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:02.0 to 64
PCI: Setting latency timer of device 0000:02:00.0 to 64
PCI: Setting latency timer of device 0000:02:00.2 to 64
ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:04.0 to 64
ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:05.0 to 64
ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:06.0 to 64
PCI: Setting latency timer of device 0000:07:00.0 to 64
PCI: Setting latency timer of device 0000:07:00.2 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
IBM machine detected. Enabling interrupts during APM calls.
apm: BIOS not found.
audit: initializing netlink socket (disabled)
audit(1236595981.974:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux:  Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key 3B4CBC4132200C93
- User ID: CentOS (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: Setting latency timer of device 0000:00:02.0 to 64
Allocate Port Service[0000:00:02.0:pcie00]
PCI: Setting latency timer of device 0000:00:04.0 to 64
Allocate Port Service[0000:00:04.0:pcie00]
PCI: Setting latency timer of device 0000:00:05.0 to 64
Allocate Port Service[0000:00:05.0:pcie00]
PCI: Setting latency timer of device 0000:00:06.0 to 64
Allocate Port Service[0000:00:06.0:pcie00]
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH5: IDE controller at PCI slot 0000:00:1f.1
ACPI: Unable to derive IRQ for device 0000:00:1f.1
ACPI: PCI Interrupt 0000:00:1f.1[A]: no GSI
ICH5: chipset revision 2
ICH5: not 100% native mode: will probe irqs later
   ide0: BM-DMA at 0x0480-0x0487, BIOS settings: hda:DMA, hdb:DMA
Probing IDE interface ide0...
hda: MATSHITADVD-ROM SR-8178, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x64,0x60 irq 1,12
PNP: PS/2 controller has invalid data port 0x64; using default 0x60
PNP: PS/2 controller has invalid command port 0x60; using default 0x64
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
ACPI: (supports S0 S4 S5)
Freeing unused kernel memory: 228k freed
Time: tsc clocksource has been installed.
Write protecting the kernel read-only data: 393k
ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 177, io mem 0xf0000000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 169, io base 0x00002200
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 185
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 185, io base 0x00002600
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
SCSI subsystem initialized
ACPI: PCI Interrupt 0000:08:07.0[A] -> GSI 27 (level, low) -> IRQ 193
usb 3-1: new low speed USB device using uhci_hcd and address 2
usb 3-1: configuration #1 chosen from 1 choice
input: Microsoft Comfort Curve Keyboard 2000 as /class/input/input0
input: USB HID v1.11 Keyboard [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:1d.1-1
input: Microsoft Comfort Curve Keyboard 2000 as /class/input/input1
input: USB HID v1.11 Device [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:1d.1-1
scsi0 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 3.0
       <Adaptec AIC7902 Ultra320 SCSI adapter>
       aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 101-133Mhz, 512 SCBs

ACPI: PCI Interrupt 0000:08:07.1[B] -> GSI 24 (level, low) -> IRQ 201
scsi1 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 3.0
       <Adaptec AIC7902 Ultra320 SCSI adapter>
       aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI-X 101-133Mhz, 512 SCBs

 Vendor: IBM-ESXS  Model: VPR073C3-ETS10FN  Rev: S370
 Type:   Direct-Access                      ANSI SCSI revision: 04
target1:0:0: asynchronous
scsi1:A:0:0: Tagged Queuing enabled.  Depth 4
target1:0:0: Beginning Domain Validation
target1:0:0: wide asynchronous
target1:0:0: FAST-160 WIDE SCSI 320.0 MB/s DT IU RDSTRM RTI WRFLOW PCOMP (6.25 ns, offset 127)
target1:0:0: Ending Domain Validation
SCSI device sda: 143374000 512-byte hdwr sectors (73407 MB)
sda: Write Protect is off
sda: Mode Sense: cb 00 10 08
SCSI device sda: drive cache: write through w/ FUA
SCSI device sda: 143374000 512-byte hdwr sectors (73407 MB)
sda: Write Protect is off
sda: Mode Sense: cb 00 10 08
SCSI device sda: drive cache: write through w/ FUA
sda: sda1 sda2 sda3
sd 1:0:0:0: Attached scsi disk sda
 Vendor: IBM-ESXS  Model: VPR073C3-ETS10FN  Rev: S370
 Type:   Direct-Access                      ANSI SCSI revision: 04
target1:0:1: asynchronous
scsi1:A:1:0: Tagged Queuing enabled.  Depth 4
target1:0:1: Beginning Domain Validation
target1:0:1: wide asynchronous
target1:0:1: FAST-160 WIDE SCSI 320.0 MB/s DT IU RDSTRM RTI WRFLOW PCOMP (6.25 ns, offset 127)
target1:0:1: Ending Domain Validation
SCSI device sdb: 143374000 512-byte hdwr sectors (73407 MB)
sdb: Write Protect is off
sdb: Mode Sense: cb 00 10 08
SCSI device sdb: drive cache: write through w/ FUA
SCSI device sdb: 143374000 512-byte hdwr sectors (73407 MB)
sdb: Write Protect is off
sdb: Mode Sense: cb 00 10 08
SCSI device sdb: drive cache: write through w/ FUA
sdb: sdb1 sdb2 sdb3
sd 1:0:1:0: Attached scsi disk sdb
 Vendor: IBM       Model: 25R5170a S320  0  Rev: 1  
 Type:   Processor                          ANSI SCSI revision: 02
target1:0:8: asynchronous
target1:0:8: Beginning Domain Validation
target1:0:8: Ending Domain Validation
libata version 3.00 loaded.
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.11.5-ioctl (2007-12-12) initialised: dm-devel@redhat.com
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: sdb2: orphan cleanup on readonly fs
ext3_orphan_cleanup: deleting unreferenced inode 11043206
ext3_orphan_cleanup: deleting unreferenced inode 8956652
EXT3-fs: sdb2: 2 orphan inodes deleted
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
SELinux:  Disabled at runtime.
SELinux:  Unregistering netfilter hooks
audit(1236596027.652:2): selinux=0 auid=4294967295 ses=4294967295
hda: ATAPI 24X DVD-ROM drive, 256kB Cache, UDMA(66)
Uniform CD-ROM driver Revision: 3.20
tg3.c:v3.86 (November 9, 2007)
ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:05:00.0 to 64
eth0: Tigon3 [partno(BCM95721) rev 4101 PHY(5750)] (PCI Express) 10/100/1000Base-T Ethernet 00:11:25:8e:16:8e
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] WireSpeed[1] TSOcap[1]
eth0: dma_rwctrl[76180000] dma_mask[64-bit]
ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:06:00.0 to 64
eth1: Tigon3 [partno(BCM95721) rev 4101 PHY(5750)] (PCI Express) 10/100/1000Base-T Ethernet 00:11:25:8e:16:8f
eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] WireSpeed[1] TSOcap[1]
eth1: dma_rwctrl[76180000] dma_mask[64-bit]
sd 1:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:1:0: Attached scsi generic sg1 type 0
scsi 1:0:8:0: Attached scsi generic sg2 type 3
input: PC Speaker as /class/input/input2
EDAC MC: Ver: 2.0.1 Nov  4 2008
intel_rng: FWH not detected
ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 209
PCI: Device 0000:00:00.0 not available because of resource collisions
e752x_edac: probe of 0000:00:00.0 failed with error -5
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
lp: driver loaded but no devices found
ACPI: Power Button (FF) [PWRF]
ibm_acpi: ec object not found
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
device-mapper: multipath: version 1.0.5 loaded
EXT3 FS on sdb2, internal journal
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sdb1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 2040244k swap on /dev/sdb3.  Priority:-1 extents:1 across:2040244k
IA-32 Microcode Update Driver: v1.14a <tigran@veritas.com>
microcode: CPU1 updated from revision 0x3 to 0x5, date = 04212005
microcode: CPU0 updated from revision 0x3 to 0x5, date = 04212005
tg3: eth0: Link is up at 1000 Mbps, full duplex.
tg3: eth0: Flow control is on for TX and on for RX.
Bluetooth: Core ver 2.10
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: HIDP (Human Interface Emulation) ver 1.1
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
ip_conntrack version 2.4 (8190 buckets, 65520 max) - 228 bytes per conntrack
Open Source Line Echo Canceller Installed
WANPIPE(tm) Hardware Support Module Beta 3.3.15.0 (c) 1994-2008 Sangoma Technologies Inc
dahdi: Telephony Interface Registered on major 196
dahdi: Version: SVN-trunk-r6079
WANPIPE(tm) Interface Support Module Beta 3.3.15.0 (c) 1994-2008 Sangoma Technologies Inc
wanpipe: no version for "dahdi_alarm_notify" found: kernel tainted.
WANPIPE(tm) Multi-Protocol WAN Driver Module Beta 3.3.15.0 (c) 1994-2008 Sangoma Technologies Inc
wanpipe: Probing for WANPIPE hardware.
ACPI: PCI Interrupt 0000:03:03.0[A] -> GSI 72 (level, low) -> IRQ 217
wanpipe: AFT-A104u PCI T1/E1 card found (HDLC rev.14), cpu(s) 1, line(s) 4, bus #3, slot #3, irq #3
ACPI: PCI Interrupt 0000:04:04.0[A] -> GSI 96 (level, low) -> IRQ 225
wanpipe: AFT-A104u PCI T1/E1 card found (HDLC rev.14), cpu(s) 1, line(s) 4, bus #4, slot #4, irq #3
wanpipe: Allocating maximum 8 devices: wanpipe1 - wanpipe8.
WANPIPE: TDM Codecs Initialized
WANPIPE(tm) Socket API Module Beta 3.3.15.0 (c) 1994-2008 Sangoma Technologies Inc
NET: Registered protocol family 25
WANPIPE(tm) WANEC Layer Beta 3.3.15.0 (c) 1995-2006 Sangoma Technologies Inc.
wanec_create_dev: Registering Wanpipe ECDEV Device!
wanpipe1: Starting WAN Setup

Processing WAN device wanpipe1...
wanpipe1: Locating: A101/1D/A102/2D/4/4D/8 card, CPU A, PciSlot=3, PciBus=3
wanpipe1: Found: A101/1D/A102/2D/4/4D/8 card, CPU A, PciSlot=3, PciBus=3, Port=0
wanpipe1: AFT PCI memory at 0xCFFF0000
wanpipe1: IRQ 217 allocated to the AFT PCI card
wanpipe1: Starting AFT 2/4/8 Hardware Init.
wanpipe1: Enabling front end link monitor
wanpipe1: Global Chip Configuration: used=1
wanpipe1: AFT Data Mux Bit Map: 0x01234567
wanpipe1: AFT Security: UnChannelised
wanpipe1: Configuring PMC COMET-QUAD E1 FE
wanpipe1:    Port 1,HDB3,CRC4,120OH
wanpipe1:    Clk Normal:0, Ch FFFFFFFF
wanpipe1:    Sig Mode CCS
wanpipe1: Front end successful
wanpipe1: Front End Interface Ready 0x80000000
wanpipe1: AFT Security: UnChannelised
wanpipe1: Configuring Device   :wanpipe1  FrmVr=14
wanpipe1:    Global MTU     = 1500
wanpipe1:    Global MRU     = 1500
wanpipe1:    Data Mux Map   = 0x01234567
wanpipe1:    Rx CRC Bytes   = 0
wanpipe1:    Global TDM Int = Disabled
wanpipe1:    Global TDM Ring= Disabled
wanpipe1:    TDM HW DTMF    = Disabled
wanpipe1:    TDMV Span      = 1 : Enabled
wanpipe1:    TDMV Dummy     = Disabled
wanpipe1:    RTP TAP        = Disabled
wanpipe1: Configuring Interface: w1g1
wanpipe1:w1g1: Running in TDM Voice Zaptel Mode.
wanpipe1:    Fifo Level Map:0x01041040
wanpipe1:    MRU           :8
wanpipe1:    MTU           :8
wanpipe1:    HDLC Eng      :Off (Transparent) | N/A
wanpipe1:    Data Mux Ctrl :On
wanpipe1:    Active Ch Map :0x00000002
wanpipe1:    First TSlot   :1
wanpipe1:    DMA/Len/Chain/EC :4/1024/Off/Off

wanpipe1: Configuring Interface: w1g1 (log supress)
wanpipe1:    Active Ch Map :0x00000004
wanpipe1:    First TSlot   :2

wanpipe1: Configuring Interface: w1g1 (log supress)
wanpipe1:    Active Ch Map :0x00000008
wanpipe1:    First TSlot   :3

wanpipe1: Configuring Interface: w1g1 (log supress)
wanpipe1:    Active Ch Map :0x00000010
wanpipe1:    First TSlot   :4

wanpipe1: Configuring Interface: w1g1 (log supress)
wanpipe1:    Active Ch Map :0x00000020
wanpipe1:    First TSlot   :5

wanpipe1: Configuring Interface: w1g1 (log supress)
wanpipe1:    Active Ch Map :0x00000040
wanpipe1:    First TSlot   :6

wanpipe1: Configuring Interface: w1g1 (log supress)
wanpipe1:    Active Ch Map :0x00000080
wanpipe1:    First TSlot   :7

wanpipe1: Configuring Interface: w1g1 (log supress)
wanpipe1:    Active Ch Map :0x00000100
wanpipe1:    First TSlot   :8

wanpipe1: Configuring Interface: w1g1 (log supress)
wanpipe1:    Active Ch Map :0x00000200
wanpipe1:    First TSlot   :9

wanpipe1: Configuring Interface: w1g1 (log supress)
wanpipe1:    Active Ch Map :0x00000400
wanpipe1:    First TSlot   :10

wanpipe1: Configuring Interface: w1g1 (log supress)
wanpipe1:    Active Ch Map :0x00000800
wanpipe1:    First TSlot   :11

wanpipe1: Configuring Interface: w1g1 (log supress)
wanpipe1:    Active Ch Map :0x00001000
wanpipe1:    First TSlot   :12

wanpipe1: Configuring Interface: w1g1 (log supress)
wanpipe1:    Active Ch Map :0x00002000
wanpipe1:    First TSlot   :13

wanpipe1: Configuring Interface: w1g1 (log supress)
wanpipe1:    Active Ch Map :0x00004000
wanpipe1:    First TSlot   :14

wanpipe1: Configuring Interface: w1g1 (log supress)
wanpipe1:    Active Ch Map :0x00008000
wanpipe1:    First TSlot   :15

wanpipe1: Configuring Interface: w1g1
wanpipe1:w1g1: Running in TDM DCHAN Voice Zaptel Mode.
wanpipe1:    MRU           :1500
wanpipe1:    MTU           :1500
wanpipe1:    HDLC Eng      :On | N/A
wanpipe1:    Data Mux Ctrl :Off
wanpipe1:    Active Ch Map :0x00010000
wanpipe1:    First TSlot   :16
wanpipe1:    DMA/Len/Chain/EC :65/4096/On/Off

wanpipe1: Configuring Interface: w1g1 (log supress)
wanpipe1:    Active Ch Map :0x00020000
wanpipe1:    First TSlot   :17

wanpipe1: Configuring Interface: w1g1 (log supress)
wanpipe1:    Active Ch Map :0x00040000
wanpipe1:    First TSlot   :18

wanpipe1: Configuring Interface: w1g1 (log supress)
wanpipe1:    Active Ch Map :0x00080000
wanpipe1:    First TSlot   :19

wanpipe1: Configuring Interface: w1g1 (log supress)
wanpipe1:    Active Ch Map :0x00100000
wanpipe1:    First TSlot   :20

wanpipe1: Configuring Interface: w1g1 (log supress)
wanpipe1:    Active Ch Map :0x00200000
wanpipe1:    First TSlot   :21

wanpipe1: Configuring Interface: w1g1 (log supress)
wanpipe1:    Active Ch Map :0x00400000
wanpipe1:    First TSlot   :22

wanpipe1: Configuring Interface: w1g1 (log supress)
wanpipe1:    Active Ch Map :0x00800000
wanpipe1:    First TSlot   :23

wanpipe1: Configuring Interface: w1g1 (log supress)
wanpipe1:    Active Ch Map :0x01000000
wanpipe1:    First TSlot   :24

wanpipe1: Configuring Interface: w1g1 (log supress)
wanpipe1:    Active Ch Map :0x02000000
wanpipe1:    First TSlot   :25

wanpipe1: Configuring Interface: w1g1 (log supress)
wanpipe1:    Active Ch Map :0x04000000
wanpipe1:    First TSlot   :26

wanpipe1: Configuring Interface: w1g1 (log supress)
wanpipe1:    Active Ch Map :0x08000000
wanpipe1:    First TSlot   :27

wanpipe1: Configuring Interface: w1g1 (log supress)
wanpipe1:    Active Ch Map :0x10000000
wanpipe1:    First TSlot   :28

wanpipe1: Configuring Interface: w1g1 (log supress)
wanpipe1:    Active Ch Map :0x20000000
wanpipe1:    First TSlot   :29

wanpipe1: Configuring Interface: w1g1 (log supress)
wanpipe1:    Active Ch Map :0x40000000
wanpipe1:    First TSlot   :30

wanpipe1: Configuring Interface: w1g1 (log supress)
wanpipe1: Configuring TDMV Master dev w1g1
wanpipe1:    Active Ch Map :0x80000000
wanpipe1:    First TSlot   :31

wanpipe1: Enable Zaptel HW DCHAN interface
wanpipe1: Wanpipe device is registered to Zaptel span # 1!
wanpipe2: Starting WAN Setup

Processing WAN device wanpipe2...
wanpipe2: Locating: A101/1D/A102/2D/4/4D/8 card, CPU A, PciSlot=3, PciBus=3
wanpipe2: Found: A101/1D/A102/2D/4/4D/8 card, CPU A, PciSlot=3, PciBus=3, Port=1
wanpipe2: Starting AFT 2/4/8 Hardware Init.
wanpipe2: Enabling front end link monitor
wanpipe2: Global Chip Configuration skiped: used=2
wanpipe2: AFT Security: UnChannelised
wanpipe2: Configuring PMC COMET-QUAD E1 FE
wanpipe2:    Port 2,HDB3,CRC4,120OH
wanpipe2:    Clk Master:1, Ch FFFFFFFF
wanpipe2:    Sig Mode CCS
wanpipe2: Front end successful
wanpipe2: Configuring FE Line=2 Clock Source: Line=1
wanpipe2: Front End Interface Ready 0x88000000
wanpipe2: AFT Security: UnChannelised
wanpipe2: Configuring Device   :wanpipe2  FrmVr=14
wanpipe2:    Global MTU     = 1500
wanpipe2:    Global MRU     = 1500
wanpipe2:    Data Mux Map   = 0x01234567
wanpipe2:    Rx CRC Bytes   = 0
wanpipe2:    Global TDM Int = Disabled
wanpipe2:    Global TDM Ring= Disabled
wanpipe2:    TDM HW DTMF    = Disabled
wanpipe2:    TDMV Span      = 2 : Enabled
wanpipe2:    TDMV Dummy     = Disabled
wanpipe2:    RTP TAP        = Disabled
wanpipe2: Configuring Interface: w2g1
wanpipe2:w2g1: Running in TDM Voice Zaptel Mode.
wanpipe2:    MRU           :8
wanpipe2:    MTU           :8
wanpipe2:    HDLC Eng      :Off (Transparent) | N/A
wanpipe2:    Data Mux Ctrl :On
wanpipe2:    Active Ch Map :0x00000002
wanpipe2:    First TSlot   :1
wanpipe2:    DMA/Len/Chain/EC :4/1024/Off/Off

wanpipe2: Configuring Interface: w2g1 (log supress)
wanpipe2:    Active Ch Map :0x00000004
wanpipe2:    First TSlot   :2

wanpipe2: Configuring Interface: w2g1 (log supress)
wanpipe2:    Active Ch Map :0x00000008
wanpipe2:    First TSlot   :3

wanpipe2: Configuring Interface: w2g1 (log supress)
wanpipe2:    Active Ch Map :0x00000010
wanpipe2:    First TSlot   :4

wanpipe2: Configuring Interface: w2g1 (log supress)
wanpipe2:    Active Ch Map :0x00000020
wanpipe2:    First TSlot   :5

wanpipe2: Configuring Interface: w2g1 (log supress)
wanpipe2:    Active Ch Map :0x00000040
wanpipe2:    First TSlot   :6

wanpipe2: Configuring Interface: w2g1 (log supress)
wanpipe2:    Active Ch Map :0x00000080
wanpipe2:    First TSlot   :7

wanpipe2: Configuring Interface: w2g1 (log supress)
wanpipe2:    Active Ch Map :0x00000100
wanpipe2:    First TSlot   :8

wanpipe2: Configuring Interface: w2g1 (log supress)
wanpipe2:    Active Ch Map :0x00000200
wanpipe2:    First TSlot   :9

wanpipe2: Configuring Interface: w2g1 (log supress)
wanpipe2:    Active Ch Map :0x00000400
wanpipe2:    First TSlot   :10

wanpipe2: Configuring Interface: w2g1 (log supress)
wanpipe2:    Active Ch Map :0x00000800
wanpipe2:    First TSlot   :11

wanpipe2: Configuring Interface: w2g1 (log supress)
wanpipe2:    Active Ch Map :0x00001000
wanpipe2:    First TSlot   :12

wanpipe2: Configuring Interface: w2g1 (log supress)
wanpipe2:    Active Ch Map :0x00002000
wanpipe2:    First TSlot   :13

wanpipe2: Configuring Interface: w2g1 (log supress)
wanpipe2:    Active Ch Map :0x00004000
wanpipe2:    First TSlot   :14

wanpipe2: Configuring Interface: w2g1 (log supress)
wanpipe2:    Active Ch Map :0x00008000
wanpipe2:    First TSlot   :15

wanpipe2: Configuring Interface: w2g1
wanpipe2:w2g1: Running in TDM DCHAN Voice Zaptel Mode.
wanpipe2:    MRU           :1500
wanpipe2:    MTU           :1500
wanpipe2:    HDLC Eng      :On | N/A
wanpipe2:    Data Mux Ctrl :Off
wanpipe2:    Active Ch Map :0x00010000
wanpipe2:    First TSlot   :16
wanpipe2:    DMA/Len/Chain/EC :65/4096/On/Off

wanpipe2: Configuring Interface: w2g1 (log supress)
wanpipe2:    Active Ch Map :0x00020000
wanpipe2:    First TSlot   :17

wanpipe2: Configuring Interface: w2g1 (log supress)
wanpipe2:    Active Ch Map :0x00040000
wanpipe2:    First TSlot   :18

wanpipe2: Configuring Interface: w2g1 (log supress)
wanpipe2:    Active Ch Map :0x00080000
wanpipe2:    First TSlot   :19

wanpipe2: Configuring Interface: w2g1 (log supress)
wanpipe2:    Active Ch Map :0x00100000
wanpipe2:    First TSlot   :20

wanpipe2: Configuring Interface: w2g1 (log supress)
wanpipe2:    Active Ch Map :0x00200000
wanpipe2:    First TSlot   :21

wanpipe2: Configuring Interface: w2g1 (log supress)
wanpipe2:    Active Ch Map :0x00400000
wanpipe2:    First TSlot   :22

wanpipe2: Configuring Interface: w2g1 (log supress)
wanpipe2:    Active Ch Map :0x00800000
wanpipe2:    First TSlot   :23

wanpipe2: Configuring Interface: w2g1 (log supress)
wanpipe2:    Active Ch Map :0x01000000
wanpipe2:    First TSlot   :24

wanpipe2: Configuring Interface: w2g1 (log supress)
wanpipe2:    Active Ch Map :0x02000000
wanpipe2:    First TSlot   :25

wanpipe2: Configuring Interface: w2g1 (log supress)
wanpipe2:    Active Ch Map :0x04000000
wanpipe2:    First TSlot   :26

wanpipe2: Configuring Interface: w2g1 (log supress)
wanpipe2:    Active Ch Map :0x08000000
wanpipe2:    First TSlot   :27

wanpipe2: Configuring Interface: w2g1 (log supress)
wanpipe2:    Active Ch Map :0x10000000
wanpipe2:    First TSlot   :28

wanpipe2: Configuring Interface: w2g1 (log supress)
wanpipe2:    Active Ch Map :0x20000000
wanpipe2:    First TSlot   :29

wanpipe2: Configuring Interface: w2g1 (log supress)
wanpipe2:    Active Ch Map :0x40000000
wanpipe2:    First TSlot   :30

wanpipe2: Configuring Interface: w2g1 (log supress)
wanpipe2: Configuring TDMV Master dev w2g1
wanpipe2:    Active Ch Map :0x80000000
wanpipe2:    First TSlot   :31

wanpipe2: Enable Zaptel HW DCHAN interface
wanpipe2: Wanpipe device is registered to Zaptel span # 2!
wanpipe3: Starting WAN Setup

Processing WAN device wanpipe3...
wanpipe3: Locating: A101/1D/A102/2D/4/4D/8 card, CPU A, PciSlot=3, PciBus=3
wanpipe3: Found: A101/1D/A102/2D/4/4D/8 card, CPU A, PciSlot=3, PciBus=3, Port=2
wanpipe3: Starting AFT 2/4/8 Hardware Init.
wanpipe3: Enabling front end link monitor
wanpipe3: Global Chip Configuration skiped: used=3
wanpipe3: AFT Security: UnChannelised
wanpipe3: Configuring PMC COMET-QUAD E1 FE
wanpipe3:    Port 3,HDB3,CRC4,120OH
wanpipe3:    Clk Master:1, Ch FFFFFFFF
wanpipe3:    Sig Mode CCS
wanpipe3: Front end successful
wanpipe3: Configuring FE Line=3 Clock Source: Line=1
wanpipe3: Front End Interface Ready 0x88000000
wanpipe3: AFT Security: UnChannelised
wanpipe3: Configuring Device   :wanpipe3  FrmVr=14
wanpipe3:    Global MTU     = 1500
wanpipe3:    Global MRU     = 1500
wanpipe3:    Data Mux Map   = 0x01234567
wanpipe3:    Rx CRC Bytes   = 0
wanpipe3:    Global TDM Int = Disabled
wanpipe3:    Global TDM Ring= Disabled
wanpipe3:    TDM HW DTMF    = Disabled
wanpipe3:    TDMV Span      = 3 : Enabled
wanpipe3:    TDMV Dummy     = Disabled
wanpipe3:    RTP TAP        = Disabled
wanpipe3: Configuring Interface: w3g1
wanpipe3:w3g1: Running in TDM Voice Zaptel Mode.
wanpipe3:    MRU           :8
wanpipe3:    MTU           :8
wanpipe3:    HDLC Eng      :Off (Transparent) | N/A
wanpipe3:    Data Mux Ctrl :On
wanpipe3:    Active Ch Map :0x00000002
wanpipe3:    First TSlot   :1
wanpipe3:    DMA/Len/Chain/EC :4/1024/Off/Off

wanpipe3: Configuring Interface: w3g1 (log supress)
wanpipe3:    Active Ch Map :0x00000004
wanpipe3:    First TSlot   :2

wanpipe3: Configuring Interface: w3g1 (log supress)
wanpipe3:    Active Ch Map :0x00000008
wanpipe3:    First TSlot   :3

wanpipe3: Configuring Interface: w3g1 (log supress)
wanpipe3:    Active Ch Map :0x00000010
wanpipe3:    First TSlot   :4

wanpipe3: Configuring Interface: w3g1 (log supress)
wanpipe3:    Active Ch Map :0x00000020
wanpipe3:    First TSlot   :5

wanpipe3: Configuring Interface: w3g1 (log supress)
wanpipe3:    Active Ch Map :0x00000040
wanpipe3:    First TSlot   :6

wanpipe3: Configuring Interface: w3g1 (log supress)
wanpipe3:    Active Ch Map :0x00000080
wanpipe3:    First TSlot   :7

wanpipe3: Configuring Interface: w3g1 (log supress)
wanpipe3:    Active Ch Map :0x00000100
wanpipe3:    First TSlot   :8

wanpipe3: Configuring Interface: w3g1 (log supress)
wanpipe3:    Active Ch Map :0x00000200
wanpipe3:    First TSlot   :9

wanpipe3: Configuring Interface: w3g1 (log supress)
wanpipe3:    Active Ch Map :0x00000400
wanpipe3:    First TSlot   :10

wanpipe3: Configuring Interface: w3g1 (log supress)
wanpipe3:    Active Ch Map :0x00000800
wanpipe3:    First TSlot   :11

wanpipe3: Configuring Interface: w3g1 (log supress)
wanpipe3:    Active Ch Map :0x00001000
wanpipe3:    First TSlot   :12

wanpipe3: Configuring Interface: w3g1 (log supress)
wanpipe3:    Active Ch Map :0x00002000
wanpipe3:    First TSlot   :13

wanpipe3: Configuring Interface: w3g1 (log supress)
wanpipe3:    Active Ch Map :0x00004000
wanpipe3:    First TSlot   :14

wanpipe3: Configuring Interface: w3g1 (log supress)
wanpipe3:    Active Ch Map :0x00008000
wanpipe3:    First TSlot   :15

wanpipe3: Configuring Interface: w3g1
wanpipe3:w3g1: Running in TDM DCHAN Voice Zaptel Mode.
wanpipe3:    MRU           :1500
wanpipe3:    MTU           :1500
wanpipe3:    HDLC Eng      :On | N/A
wanpipe3:    Data Mux Ctrl :Off
wanpipe3:    Active Ch Map :0x00010000
wanpipe3:    First TSlot   :16
wanpipe3:    DMA/Len/Chain/EC :65/4096/On/Off

wanpipe3: Configuring Interface: w3g1 (log supress)
wanpipe3:    Active Ch Map :0x00020000
wanpipe3:    First TSlot   :17

wanpipe3: Configuring Interface: w3g1 (log supress)
wanpipe3:    Active Ch Map :0x00040000
wanpipe3:    First TSlot   :18

wanpipe3: Configuring Interface: w3g1 (log supress)
wanpipe3:    Active Ch Map :0x00080000
wanpipe3:    First TSlot   :19

wanpipe3: Configuring Interface: w3g1 (log supress)
wanpipe3:    Active Ch Map :0x00100000
wanpipe3:    First TSlot   :20

wanpipe3: Configuring Interface: w3g1 (log supress)
wanpipe3:    Active Ch Map :0x00200000
wanpipe3:    First TSlot   :21

wanpipe3: Configuring Interface: w3g1 (log supress)
wanpipe3:    Active Ch Map :0x00400000
wanpipe3:    First TSlot   :22

wanpipe3: Configuring Interface: w3g1 (log supress)
wanpipe3:    Active Ch Map :0x00800000
wanpipe3:    First TSlot   :23

wanpipe3: Configuring Interface: w3g1 (log supress)
wanpipe3:    Active Ch Map :0x01000000
wanpipe3:    First TSlot   :24

wanpipe3: Configuring Interface: w3g1 (log supress)
wanpipe3:    Active Ch Map :0x02000000
wanpipe3:    First TSlot   :25

wanpipe3: Configuring Interface: w3g1 (log supress)
wanpipe3:    Active Ch Map :0x04000000
wanpipe3:    First TSlot   :26

wanpipe3: Configuring Interface: w3g1 (log supress)
wanpipe3:    Active Ch Map :0x08000000
wanpipe3:    First TSlot   :27

wanpipe3: Configuring Interface: w3g1 (log supress)
wanpipe3:    Active Ch Map :0x10000000
wanpipe3:    First TSlot   :28

wanpipe3: Configuring Interface: w3g1 (log supress)
wanpipe3:    Active Ch Map :0x20000000
wanpipe3:    First TSlot   :29

wanpipe3: Configuring Interface: w3g1 (log supress)
wanpipe3:    Active Ch Map :0x40000000
wanpipe3:    First TSlot   :30

wanpipe3: Configuring Interface: w3g1 (log supress)
wanpipe3: Configuring TDMV Master dev w3g1
wanpipe3:    Active Ch Map :0x80000000
wanpipe3:    First TSlot   :31

wanpipe3: Enable Zaptel HW DCHAN interface
wanpipe3: Wanpipe device is registered to Zaptel span # 3!
wanpipe4: Starting WAN Setup

Processing WAN device wanpipe4...
wanpipe4: Locating: A101/1D/A102/2D/4/4D/8 card, CPU A, PciSlot=3, PciBus=3
wanpipe4: Found: A101/1D/A102/2D/4/4D/8 card, CPU A, PciSlot=3, PciBus=3, Port=3
wanpipe4: Starting AFT 2/4/8 Hardware Init.
wanpipe4: Enabling front end link monitor
wanpipe4: Global Chip Configuration skiped: used=4
wanpipe4: AFT Security: UnChannelised
wanpipe4: Configuring PMC COMET-QUAD E1 FE
wanpipe4:    Port 4,HDB3,CRC4,120OH
wanpipe4:    Clk Master:1, Ch FFFFFFFF
wanpipe4:    Sig Mode CCS
wanpipe4: Front end successful
wanpipe4: Configuring FE Line=4 Clock Source: Line=1
wanpipe4: Front End Interface Ready 0x88000000
wanpipe4: AFT Security: UnChannelised
wanpipe4: Configuring Device   :wanpipe4  FrmVr=14
wanpipe4:    Global MTU     = 1500
wanpipe4:    Global MRU     = 1500
wanpipe4:    Data Mux Map   = 0x01234567
wanpipe4:    Rx CRC Bytes   = 0
wanpipe4:    Global TDM Int = Disabled
wanpipe4:    Global TDM Ring= Disabled
wanpipe4:    TDM HW DTMF    = Disabled
wanpipe4:    TDMV Span      = 4 : Enabled
wanpipe4:    TDMV Dummy     = Disabled
wanpipe4:    RTP TAP        = Disabled
wanpipe4: Configuring Interface: w4g1
wanpipe4:w4g1: Running in TDM Voice Zaptel Mode.
wanpipe4:    MRU           :8
wanpipe4:    MTU           :8
wanpipe4:    HDLC Eng      :Off (Transparent) | N/A
wanpipe4:    Data Mux Ctrl :On
wanpipe4:    Active Ch Map :0x00000002
wanpipe4:    First TSlot   :1
wanpipe4:    DMA/Len/Chain/EC :4/1024/Off/Off

wanpipe4: Configuring Interface: w4g1 (log supress)
wanpipe4:    Active Ch Map :0x00000004
wanpipe4:    First TSlot   :2

wanpipe4: Configuring Interface: w4g1 (log supress)
wanpipe4:    Active Ch Map :0x00000008
wanpipe4:    First TSlot   :3

wanpipe4: Configuring Interface: w4g1 (log supress)
wanpipe4:    Active Ch Map :0x00000010
wanpipe4:    First TSlot   :4

wanpipe4: Configuring Interface: w4g1 (log supress)
wanpipe4:    Active Ch Map :0x00000020
wanpipe4:    First TSlot   :5

wanpipe4: Configuring Interface: w4g1 (log supress)
wanpipe4:    Active Ch Map :0x00000040
wanpipe4:    First TSlot   :6

wanpipe4: Configuring Interface: w4g1 (log supress)
wanpipe4:    Active Ch Map :0x00000080
wanpipe4:    First TSlot   :7

wanpipe4: Configuring Interface: w4g1 (log supress)
wanpipe4:    Active Ch Map :0x00000100
wanpipe4:    First TSlot   :8

wanpipe4: Configuring Interface: w4g1 (log supress)
wanpipe4:    Active Ch Map :0x00000200
wanpipe4:    First TSlot   :9

wanpipe4: Configuring Interface: w4g1 (log supress)
wanpipe4:    Active Ch Map :0x00000400
wanpipe4:    First TSlot   :10

wanpipe4: Configuring Interface: w4g1 (log supress)
wanpipe4:    Active Ch Map :0x00000800
wanpipe4:    First TSlot   :11

wanpipe4: Configuring Interface: w4g1 (log supress)
wanpipe4:    Active Ch Map :0x00001000
wanpipe4:    First TSlot   :12

wanpipe4: Configuring Interface: w4g1 (log supress)
wanpipe4:    Active Ch Map :0x00002000
wanpipe4:    First TSlot   :13

wanpipe4: Configuring Interface: w4g1 (log supress)
wanpipe4:    Active Ch Map :0x00004000
wanpipe4:    First TSlot   :14

wanpipe4: Configuring Interface: w4g1 (log supress)
wanpipe4:    Active Ch Map :0x00008000
wanpipe4:    First TSlot   :15

wanpipe4: Configuring Interface: w4g1
wanpipe4:w4g1: Running in TDM DCHAN Voice Zaptel Mode.
wanpipe4:    MRU           :1500
wanpipe4:    MTU           :1500
wanpipe4:    HDLC Eng      :On | N/A
wanpipe4:    Data Mux Ctrl :Off
wanpipe4:    Active Ch Map :0x00010000
wanpipe4:    First TSlot   :16
wanpipe4:    DMA/Len/Chain/EC :65/4096/On/Off

wanpipe4: Configuring Interface: w4g1 (log supress)
wanpipe4:    Active Ch Map :0x00020000
wanpipe4:    First TSlot   :17

wanpipe4: Configuring Interface: w4g1 (log supress)
wanpipe4:    Active Ch Map :0x00040000
wanpipe4:    First TSlot   :18

wanpipe4: Configuring Interface: w4g1 (log supress)
wanpipe4:    Active Ch Map :0x00080000
wanpipe4:    First TSlot   :19

wanpipe4: Configuring Interface: w4g1 (log supress)
wanpipe4:    Active Ch Map :0x00100000
wanpipe4:    First TSlot   :20

wanpipe4: Configuring Interface: w4g1 (log supress)
wanpipe4:    Active Ch Map :0x00200000
wanpipe4:    First TSlot   :21

wanpipe4: Configuring Interface: w4g1 (log supress)
wanpipe4:    Active Ch Map :0x00400000
wanpipe4:    First TSlot   :22

wanpipe4: Configuring Interface: w4g1 (log supress)
wanpipe4:    Active Ch Map :0x00800000
wanpipe4:    First TSlot   :23

wanpipe4: Configuring Interface: w4g1 (log supress)
wanpipe4:    Active Ch Map :0x01000000
wanpipe4:    First TSlot   :24

wanpipe4: Configuring Interface: w4g1 (log supress)
wanpipe4:    Active Ch Map :0x02000000
wanpipe4:    First TSlot   :25

wanpipe4: Configuring Interface: w4g1 (log supress)
wanpipe4:    Active Ch Map :0x04000000
wanpipe4:    First TSlot   :26

wanpipe4: Configuring Interface: w4g1 (log supress)
wanpipe4:    Active Ch Map :0x08000000
wanpipe4:    First TSlot   :27

wanpipe4: Configuring Interface: w4g1 (log supress)
wanpipe4:    Active Ch Map :0x10000000
wanpipe4:    First TSlot   :28

wanpipe4: Configuring Interface: w4g1 (log supress)
wanpipe4:    Active Ch Map :0x20000000
wanpipe4:    First TSlot   :29

wanpipe4: Configuring Interface: w4g1 (log supress)
wanpipe4:    Active Ch Map :0x40000000
wanpipe4:    First TSlot   :30

wanpipe4: Configuring Interface: w4g1 (log supress)
wanpipe4: Configuring TDMV Master dev w4g1
wanpipe4:    Active Ch Map :0x80000000
wanpipe4:    First TSlot   :31

wanpipe4: Enable Zaptel HW DCHAN interface
wanpipe4: Wanpipe device is registered to Zaptel span # 4!
wanpipe5: Starting WAN Setup

Processing WAN device wanpipe5...
wanpipe5: Locating: A101/1D/A102/2D/4/4D/8 card, CPU A, PciSlot=4, PciBus=4
wanpipe5: Found: A101/1D/A102/2D/4/4D/8 card, CPU A, PciSlot=4, PciBus=4, Port=0
wanpipe5: AFT PCI memory at 0xCDFF0000
wanpipe5: IRQ 225 allocated to the AFT PCI card
wanpipe5: Starting AFT 2/4/8 Hardware Init.
wanpipe5: Enabling front end link monitor
wanpipe5: Global Chip Configuration: used=1
wanpipe5: AFT Data Mux Bit Map: 0x01234567
wanpipe5: AFT Security: UnChannelised
wanpipe5: Configuring PMC COMET-QUAD E1 FE
wanpipe5:    Port 1,HDB3,CRC4,120OH
wanpipe5:    Clk Normal:0, Ch FFFFFFFF
wanpipe5:    Sig Mode CCS
wanpipe5: Front end successful
wanpipe5: Front End Interface Ready 0x80000000
wanpipe5: AFT Security: UnChannelised
wanpipe5: Configuring Device   :wanpipe5  FrmVr=14
wanpipe5:    Global MTU     = 1500
wanpipe5:    Global MRU     = 1500
wanpipe5:    Data Mux Map   = 0x01234567
wanpipe5:    Rx CRC Bytes   = 0
wanpipe5:    Global TDM Int = Disabled
wanpipe5:    Global TDM Ring= Disabled
wanpipe5:    TDM HW DTMF    = Disabled
wanpipe5:    TDMV Span      = 5 : Enabled
wanpipe5:    TDMV Dummy     = Disabled
wanpipe5:    RTP TAP        = Disabled
wanpipe5: Configuring Interface: w5g1
wanpipe5:w5g1: Running in TDM Voice Zaptel Mode.
wanpipe5:    Fifo Level Map:0x01041040
wanpipe5:    MRU           :8
wanpipe5:    MTU           :8
wanpipe5:    HDLC Eng      :Off (Transparent) | N/A
wanpipe5:    Data Mux Ctrl :On
wanpipe5:    Active Ch Map :0x00000002
wanpipe5:    First TSlot   :1
wanpipe5:    DMA/Len/Chain/EC :4/1024/Off/Off

wanpipe5: Configuring Interface: w5g1 (log supress)
wanpipe5:    Active Ch Map :0x00000004
wanpipe5:    First TSlot   :2

wanpipe5: Configuring Interface: w5g1 (log supress)
wanpipe5:    Active Ch Map :0x00000008
wanpipe5:    First TSlot   :3

wanpipe5: Configuring Interface: w5g1 (log supress)
wanpipe5:    Active Ch Map :0x00000010
wanpipe5:    First TSlot   :4

wanpipe5: Configuring Interface: w5g1 (log supress)
wanpipe5:    Active Ch Map :0x00000020
wanpipe5:    First TSlot   :5

wanpipe5: Configuring Interface: w5g1 (log supress)
wanpipe5:    Active Ch Map :0x00000040
wanpipe5:    First TSlot   :6

wanpipe5: Configuring Interface: w5g1 (log supress)
wanpipe5:    Active Ch Map :0x00000080
wanpipe5:    First TSlot   :7

wanpipe5: Configuring Interface: w5g1 (log supress)
wanpipe5:    Active Ch Map :0x00000100
wanpipe5:    First TSlot   :8

wanpipe5: Configuring Interface: w5g1 (log supress)
wanpipe5:    Active Ch Map :0x00000200
wanpipe5:    First TSlot   :9

wanpipe5: Configuring Interface: w5g1 (log supress)
wanpipe5:    Active Ch Map :0x00000400
wanpipe5:    First TSlot   :10

wanpipe5: Configuring Interface: w5g1 (log supress)
wanpipe5:    Active Ch Map :0x00000800
wanpipe5:    First TSlot   :11

wanpipe5: Configuring Interface: w5g1 (log supress)
wanpipe5:    Active Ch Map :0x00001000
wanpipe5:    First TSlot   :12

wanpipe5: Configuring Interface: w5g1 (log supress)
wanpipe5:    Active Ch Map :0x00002000
wanpipe5:    First TSlot   :13

wanpipe5: Configuring Interface: w5g1 (log supress)
wanpipe5:    Active Ch Map :0x00004000
wanpipe5:    First TSlot   :14

wanpipe5: Configuring Interface: w5g1 (log supress)
wanpipe5:    Active Ch Map :0x00008000
wanpipe5:    First TSlot   :15

wanpipe5: Configuring Interface: w5g1
wanpipe5:w5g1: Running in TDM DCHAN Voice Zaptel Mode.
wanpipe5:    MRU           :1500
wanpipe5:    MTU           :1500
wanpipe5:    HDLC Eng      :On | N/A
wanpipe5:    Data Mux Ctrl :Off
wanpipe5:    Active Ch Map :0x00010000
wanpipe5:    First TSlot   :16
wanpipe5:    DMA/Len/Chain/EC :65/4096/On/Off

wanpipe5: Configuring Interface: w5g1 (log supress)
wanpipe5:    Active Ch Map :0x00020000
wanpipe5:    First TSlot   :17

wanpipe5: Configuring Interface: w5g1 (log supress)
wanpipe5:    Active Ch Map :0x00040000
wanpipe5:    First TSlot   :18

wanpipe5: Configuring Interface: w5g1 (log supress)
wanpipe5:    Active Ch Map :0x00080000
wanpipe5:    First TSlot   :19

wanpipe5: Configuring Interface: w5g1 (log supress)
wanpipe5:    Active Ch Map :0x00100000
wanpipe5:    First TSlot   :20

wanpipe5: Configuring Interface: w5g1 (log supress)
wanpipe5:    Active Ch Map :0x00200000
wanpipe5:    First TSlot   :21

wanpipe5: Configuring Interface: w5g1 (log supress)
wanpipe5:    Active Ch Map :0x00400000
wanpipe5:    First TSlot   :22

wanpipe5: Configuring Interface: w5g1 (log supress)
wanpipe5:    Active Ch Map :0x00800000
wanpipe5:    First TSlot   :23

wanpipe5: Configuring Interface: w5g1 (log supress)
wanpipe5:    Active Ch Map :0x01000000
wanpipe5:    First TSlot   :24

wanpipe5: Configuring Interface: w5g1 (log supress)
wanpipe5:    Active Ch Map :0x02000000
wanpipe5:    First TSlot   :25

wanpipe5: Configuring Interface: w5g1 (log supress)
wanpipe5:    Active Ch Map :0x04000000
wanpipe5:    First TSlot   :26

wanpipe5: Configuring Interface: w5g1 (log supress)
wanpipe5:    Active Ch Map :0x08000000
wanpipe5:    First TSlot   :27

wanpipe5: Configuring Interface: w5g1 (log supress)
wanpipe5:    Active Ch Map :0x10000000
wanpipe5:    First TSlot   :28

wanpipe5: Configuring Interface: w5g1 (log supress)
wanpipe5:    Active Ch Map :0x20000000
wanpipe5:    First TSlot   :29

wanpipe5: Configuring Interface: w5g1 (log supress)
wanpipe5:    Active Ch Map :0x40000000
wanpipe5:    First TSlot   :30

wanpipe5: Configuring Interface: w5g1 (log supress)
wanpipe5: Configuring TDMV Master dev w5g1
wanpipe5:    Active Ch Map :0x80000000
wanpipe5:    First TSlot   :31

wanpipe5: Enable Zaptel HW DCHAN interface
wanpipe5: Wanpipe device is registered to Zaptel span # 5!
wanpipe1: E1 connected!
wanpipe1: AFT communications enabled!
wanpipe1: AFT Per Port TDM Intr
wanpipe6: Starting WAN Setup

Processing WAN device wanpipe6...
wanpipe6: Locating: A101/1D/A102/2D/4/4D/8 card, CPU A, PciSlot=4, PciBus=4
wanpipe6: Found: A101/1D/A102/2D/4/4D/8 card, CPU A, PciSlot=4, PciBus=4, Port=1
wanpipe6: Starting AFT 2/4/8 Hardware Init.
wanpipe6: Enabling front end link monitor
wanpipe6: Global Chip Configuration skiped: used=2
wanpipe6: AFT Security: UnChannelised
wanpipe6: Configuring PMC COMET-QUAD E1 FE
wanpipe6:    Port 2,HDB3,CRC4,120OH
wanpipe6:    Clk Master:1, Ch FFFFFFFF
wanpipe6:    Sig Mode CCS
wanpipe6: Front end successful
wanpipe6: Configuring FE Line=2 Clock Source: Line=1
wanpipe6: Front End Interface Ready 0x88000000
wanpipe6: AFT Security: UnChannelised
wanpipe6: Configuring Device   :wanpipe6  FrmVr=14
wanpipe6:    Global MTU     = 1500
wanpipe6:    Global MRU     = 1500
wanpipe6:    Data Mux Map   = 0x01234567
wanpipe6:    Rx CRC Bytes   = 0
wanpipe6:    Global TDM Int = Disabled
wanpipe6:    Global TDM Ring= Disabled
wanpipe6:    TDM HW DTMF    = Disabled
wanpipe6:    TDMV Span      = 6 : Enabled
wanpipe6:    TDMV Dummy     = Disabled
wanpipe6:    RTP TAP        = Disabled
wanpipe6: Configuring Interface: w6g1
wanpipe6:w6g1: Running in TDM Voice Zaptel Mode.
wanpipe6:    MRU           :8
wanpipe6:    MTU           :8
wanpipe6:    HDLC Eng      :Off (Transparent) | N/A
wanpipe6:    Data Mux Ctrl :On
wanpipe6:    Active Ch Map :0x00000002
wanpipe6:    First TSlot   :1
wanpipe6:    DMA/Len/Chain/EC :4/1024/Off/Off

wanpipe6: Configuring Interface: w6g1 (log supress)
wanpipe6:    Active Ch Map :0x00000004
wanpipe6:    First TSlot   :2

wanpipe6: Configuring Interface: w6g1 (log supress)
wanpipe6:    Active Ch Map :0x00000008
wanpipe6:    First TSlot   :3

wanpipe6: Configuring Interface: w6g1 (log supress)
wanpipe6:    Active Ch Map :0x00000010
wanpipe6:    First TSlot   :4

wanpipe6: Configuring Interface: w6g1 (log supress)
wanpipe6:    Active Ch Map :0x00000020
wanpipe6:    First TSlot   :5

wanpipe6: Configuring Interface: w6g1 (log supress)
wanpipe6:    Active Ch Map :0x00000040
wanpipe6:    First TSlot   :6

wanpipe6: Configuring Interface: w6g1 (log supress)
wanpipe6:    Active Ch Map :0x00000080
wanpipe6:    First TSlot   :7

wanpipe6: Configuring Interface: w6g1 (log supress)
wanpipe6:    Active Ch Map :0x00000100
wanpipe6:    First TSlot   :8

wanpipe6: Configuring Interface: w6g1 (log supress)
wanpipe6:    Active Ch Map :0x00000200
wanpipe6:    First TSlot   :9

wanpipe6: Configuring Interface: w6g1 (log supress)
wanpipe6:    Active Ch Map :0x00000400
wanpipe6:    First TSlot   :10

wanpipe6: Configuring Interface: w6g1 (log supress)
wanpipe6:    Active Ch Map :0x00000800
wanpipe6:    First TSlot   :11

wanpipe6: Configuring Interface: w6g1 (log supress)
wanpipe6:    Active Ch Map :0x00001000
wanpipe6:    First TSlot   :12

wanpipe6: Configuring Interface: w6g1 (log supress)
wanpipe6:    Active Ch Map :0x00002000
wanpipe6:    First TSlot   :13

wanpipe6: Configuring Interface: w6g1 (log supress)
wanpipe6:    Active Ch Map :0x00004000
wanpipe6:    First TSlot   :14

wanpipe6: Configuring Interface: w6g1 (log supress)
wanpipe6:    Active Ch Map :0x00008000
wanpipe6:    First TSlot   :15

wanpipe6: Configuring Interface: w6g1
wanpipe6:w6g1: Running in TDM DCHAN Voice Zaptel Mode.
wanpipe6:    MRU           :1500
wanpipe6:    MTU           :1500
wanpipe6:    HDLC Eng      :On | N/A
wanpipe6:    Data Mux Ctrl :Off
wanpipe6:    Active Ch Map :0x00010000
wanpipe6:    First TSlot   :16
wanpipe6:    DMA/Len/Chain/EC :65/4096/On/Off

wanpipe6: Configuring Interface: w6g1 (log supress)
wanpipe6:    Active Ch Map :0x00020000
wanpipe6:    First TSlot   :17

wanpipe6: Configuring Interface: w6g1 (log supress)
wanpipe6:    Active Ch Map :0x00040000
wanpipe6:    First TSlot   :18

wanpipe6: Configuring Interface: w6g1 (log supress)
wanpipe6:    Active Ch Map :0x00080000
wanpipe6:    First TSlot   :19

wanpipe6: Configuring Interface: w6g1 (log supress)
wanpipe6:    Active Ch Map :0x00100000
wanpipe6:    First TSlot   :20

wanpipe6: Configuring Interface: w6g1 (log supress)
wanpipe6:    Active Ch Map :0x00200000
wanpipe6:    First TSlot   :21

wanpipe6: Configuring Interface: w6g1 (log supress)
wanpipe6:    Active Ch Map :0x00400000
wanpipe6:    First TSlot   :22

wanpipe6: Configuring Interface: w6g1 (log supress)
wanpipe6:    Active Ch Map :0x00800000
wanpipe6:    First TSlot   :23

wanpipe6: Configuring Interface: w6g1 (log supress)
wanpipe6:    Active Ch Map :0x01000000
wanpipe6:    First TSlot   :24

wanpipe6: Configuring Interface: w6g1 (log supress)
wanpipe6:    Active Ch Map :0x02000000
wanpipe6:    First TSlot   :25

wanpipe6: Configuring Interface: w6g1 (log supress)
wanpipe6:    Active Ch Map :0x04000000
wanpipe6:    First TSlot   :26

wanpipe6: Configuring Interface: w6g1 (log supress)
wanpipe6:    Active Ch Map :0x08000000
wanpipe6:    First TSlot   :27

wanpipe6: Configuring Interface: w6g1 (log supress)
wanpipe6:    Active Ch Map :0x10000000
wanpipe6:    First TSlot   :28

wanpipe6: Configuring Interface: w6g1 (log supress)
wanpipe6:    Active Ch Map :0x20000000
wanpipe6:    First TSlot   :29

wanpipe6: Configuring Interface: w6g1 (log supress)
wanpipe6:    Active Ch Map :0x40000000
wanpipe6:    First TSlot   :30

wanpipe6: Configuring Interface: w6g1 (log supress)
wanpipe6: Configuring TDMV Master dev w6g1
wanpipe6:    Active Ch Map :0x80000000
wanpipe6:    First TSlot   :31

wanpipe6: Enable Zaptel HW DCHAN interface
wanpipe6: Wanpipe device is registered to Zaptel span # 6!
wanpipe2: E1 connected!
wanpipe2: AFT communications enabled!
wanpipe2: AFT Per Port TDM Intr
eth0: no IPv6 routers present
wanpipe7: Starting WAN Setup

Processing WAN device wanpipe7...
wanpipe7: Locating: A101/1D/A102/2D/4/4D/8 card, CPU A, PciSlot=4, PciBus=4
wanpipe7: Found: A101/1D/A102/2D/4/4D/8 card, CPU A, PciSlot=4, PciBus=4, Port=2
wanpipe7: Starting AFT 2/4/8 Hardware Init.
wanpipe7: Enabling front end link monitor
wanpipe7: Global Chip Configuration skiped: used=3
wanpipe7: AFT Security: UnChannelised
wanpipe7: Configuring PMC COMET-QUAD E1 FE
wanpipe7:    Port 3,HDB3,CRC4,120OH
wanpipe7:    Clk Master:1, Ch FFFFFFFF
wanpipe7:    Sig Mode CCS
wanpipe3: E1 disconnected!
wanpipe7: Front end successful
wanpipe7: Configuring FE Line=3 Clock Source: Line=1
wanpipe7: Front End Interface Ready 0x88000000
wanpipe7: AFT Security: UnChannelised
wanpipe7: Configuring Device   :wanpipe7  FrmVr=14
wanpipe7:    Global MTU     = 1500
wanpipe7:    Global MRU     = 1500
wanpipe7:    Data Mux Map   = 0x01234567
wanpipe7:    Rx CRC Bytes   = 0
wanpipe7:    Global TDM Int = Disabled
wanpipe7:    Global TDM Ring= Disabled
wanpipe7:    TDM HW DTMF    = Disabled
wanpipe7:    TDMV Span      = 7 : Enabled
wanpipe7:    TDMV Dummy     = Disabled
wanpipe7:    RTP TAP        = Disabled
wanpipe4: E1 connected!
wanpipe4: AFT communications enabled!
wanpipe4: AFT Per Port TDM Intr
wanpipe7: Configuring Interface: w7g1
wanpipe7:w7g1: Running in TDM Voice Zaptel Mode.
wanpipe7:    MRU           :8
wanpipe7:    MTU           :8
wanpipe7:    HDLC Eng      :Off (Transparent) | N/A
wanpipe7:    Data Mux Ctrl :On
wanpipe7:    Active Ch Map :0x00000002
wanpipe7:    First TSlot   :1
wanpipe7:    DMA/Len/Chain/EC :4/1024/Off/Off

wanpipe7: Configuring Interface: w7g1 (log supress)
wanpipe7:    Active Ch Map :0x00000004
wanpipe7:    First TSlot   :2

wanpipe7: Configuring Interface: w7g1 (log supress)
wanpipe7:    Active Ch Map :0x00000008
wanpipe7:    First TSlot   :3

wanpipe7: Configuring Interface: w7g1 (log supress)
wanpipe7:    Active Ch Map :0x00000010
wanpipe7:    First TSlot   :4

wanpipe7: Configuring Interface: w7g1 (log supress)
wanpipe7:    Active Ch Map :0x00000020
wanpipe7:    First TSlot   :5

wanpipe7: Configuring Interface: w7g1 (log supress)
wanpipe7:    Active Ch Map :0x00000040
wanpipe7:    First TSlot   :6

wanpipe7: Configuring Interface: w7g1 (log supress)
wanpipe7:    Active Ch Map :0x00000080
wanpipe7:    First TSlot   :7

wanpipe7: Configuring Interface: w7g1 (log supress)
wanpipe7:    Active Ch Map :0x00000100
wanpipe7:    First TSlot   :8

wanpipe7: Configuring Interface: w7g1 (log supress)
wanpipe7:    Active Ch Map :0x00000200
wanpipe7:    First TSlot   :9

wanpipe7: Configuring Interface: w7g1 (log supress)
wanpipe7:    Active Ch Map :0x00000400
wanpipe7:    First TSlot   :10

wanpipe7: Configuring Interface: w7g1 (log supress)
wanpipe7:    Active Ch Map :0x00000800
wanpipe7:    First TSlot   :11

wanpipe7: Configuring Interface: w7g1 (log supress)
wanpipe7:    Active Ch Map :0x00001000
wanpipe7:    First TSlot   :12

wanpipe7: Configuring Interface: w7g1 (log supress)
wanpipe7:    Active Ch Map :0x00002000
wanpipe7:    First TSlot   :13

wanpipe7: Configuring Interface: w7g1 (log supress)
wanpipe7:    Active Ch Map :0x00004000
wanpipe7:    First TSlot   :14

wanpipe7: Configuring Interface: w7g1 (log supress)
wanpipe7:    Active Ch Map :0x00008000
wanpipe7:    First TSlot   :15

wanpipe7: Configuring Interface: w7g1
wanpipe7:w7g1: Running in TDM DCHAN Voice Zaptel Mode.
wanpipe7:    MRU           :1500
wanpipe7:    MTU           :1500
wanpipe7:    HDLC Eng      :On | N/A
wanpipe7:    Data Mux Ctrl :Off
wanpipe7:    Active Ch Map :0x00010000
wanpipe7:    First TSlot   :16
wanpipe7:    DMA/Len/Chain/EC :65/4096/On/Off

wanpipe7: Configuring Interface: w7g1 (log supress)
wanpipe7:    Active Ch Map :0x00020000
wanpipe7:    First TSlot   :17

wanpipe7: Configuring Interface: w7g1 (log supress)
wanpipe7:    Active Ch Map :0x00040000
wanpipe7:    First TSlot   :18

wanpipe7: Configuring Interface: w7g1 (log supress)
wanpipe7:    Active Ch Map :0x00080000
wanpipe7:    First TSlot   :19

wanpipe7: Configuring Interface: w7g1 (log supress)
wanpipe7:    Active Ch Map :0x00100000
wanpipe7:    First TSlot   :20

wanpipe7: Configuring Interface: w7g1 (log supress)
wanpipe7:    Active Ch Map :0x00200000
wanpipe7:    First TSlot   :21

wanpipe7: Configuring Interface: w7g1 (log supress)
wanpipe7:    Active Ch Map :0x00400000
wanpipe7:    First TSlot   :22

wanpipe7: Configuring Interface: w7g1 (log supress)
wanpipe7:    Active Ch Map :0x00800000
wanpipe7:    First TSlot   :23

wanpipe7: Configuring Interface: w7g1 (log supress)
wanpipe7:    Active Ch Map :0x01000000
wanpipe7:    First TSlot   :24

wanpipe7: Configuring Interface: w7g1 (log supress)
wanpipe7:    Active Ch Map :0x02000000
wanpipe7:    First TSlot   :25

wanpipe7: Configuring Interface: w7g1 (log supress)
wanpipe7:    Active Ch Map :0x04000000
wanpipe7:    First TSlot   :26

wanpipe7: Configuring Interface: w7g1 (log supress)
wanpipe7:    Active Ch Map :0x08000000
wanpipe7:    First TSlot   :27

wanpipe7: Configuring Interface: w7g1 (log supress)
wanpipe7:    Active Ch Map :0x10000000
wanpipe7:    First TSlot   :28

wanpipe7: Configuring Interface: w7g1 (log supress)
wanpipe7:    Active Ch Map :0x20000000
wanpipe7:    First TSlot   :29

wanpipe7: Configuring Interface: w7g1 (log supress)
wanpipe7:    Active Ch Map :0x40000000
wanpipe7:    First TSlot   :30

wanpipe7: Configuring Interface: w7g1 (log supress)
wanpipe7: Configuring TDMV Master dev w7g1
wanpipe7:    Active Ch Map :0x80000000
wanpipe7:    First TSlot   :31

wanpipe7: Enable Zaptel HW DCHAN interface
wanpipe7: Wanpipe device is registered to Zaptel span # 7!
wanpipe8: Starting WAN Setup

Processing WAN device wanpipe8...
wanpipe8: Locating: A101/1D/A102/2D/4/4D/8 card, CPU A, PciSlot=4, PciBus=4
wanpipe8: Found: A101/1D/A102/2D/4/4D/8 card, CPU A, PciSlot=4, PciBus=4, Port=3
wanpipe8: Starting AFT 2/4/8 Hardware Init.
wanpipe8: Enabling front end link monitor
wanpipe8: Global Chip Configuration skiped: used=4
wanpipe8: AFT Security: UnChannelised
wanpipe8: Configuring PMC COMET-QUAD E1 FE
wanpipe8:    Port 4,HDB3,CRC4,120OH
wanpipe8:    Clk Master:1, Ch FFFFFFFF
wanpipe8:    Sig Mode CCS
wanpipe8: Front end successful
wanpipe8: Configuring FE Line=4 Clock Source: Line=1
wanpipe8: Front End Interface Ready 0x88000000
wanpipe8: AFT Security: UnChannelised
wanpipe8: Configuring Device   :wanpipe8  FrmVr=14
wanpipe8:    Global MTU     = 1500
wanpipe8:    Global MRU     = 1500
wanpipe8:    Data Mux Map   = 0x01234567
wanpipe8:    Rx CRC Bytes   = 0
wanpipe8:    Global TDM Int = Disabled
wanpipe8:    Global TDM Ring= Disabled
wanpipe8:    TDM HW DTMF    = Disabled
wanpipe8:    TDMV Span      = 8 : Enabled
wanpipe8:    TDMV Dummy     = Disabled
wanpipe8:    RTP TAP        = Disabled
wanpipe5: E1 connected!
wanpipe8: Configuring Interface: w8g1
wanpipe8:w8g1: Running in TDM Voice Zaptel Mode.
wanpipe8:    MRU           :8
wanpipe8:    MTU           :8
wanpipe8:    HDLC Eng      :Off (Transparent) | N/A
wanpipe8:    Data Mux Ctrl :On
wanpipe8:    Active Ch Map :0x00000002
wanpipe8:    First TSlot   :1
wanpipe8:    DMA/Len/Chain/EC :4/1024/Off/Off

wanpipe8: Configuring Interface: w8g1 (log supress)
wanpipe8:    Active Ch Map :0x00000004
wanpipe8:    First TSlot   :2

wanpipe8: Configuring Interface: w8g1 (log supress)
wanpipe8:    Active Ch Map :0x00000008
wanpipe8:    First TSlot   :3

wanpipe8: Configuring Interface: w8g1 (log supress)
wanpipe8:    Active Ch Map :0x00000010
wanpipe8:    First TSlot   :4

wanpipe8: Configuring Interface: w8g1 (log supress)
wanpipe8:    Active Ch Map :0x00000020
wanpipe8:    First TSlot   :5

wanpipe8: Configuring Interface: w8g1 (log supress)
wanpipe8:    Active Ch Map :0x00000040
wanpipe8:    First TSlot   :6

wanpipe8: Configuring Interface: w8g1 (log supress)
wanpipe8:    Active Ch Map :0x00000080
wanpipe8:  
Comments:By: Shaun Ruffell (sruffell) 2009-03-09 09:33:11

First, if you've purchased a tc400p card, you are entitled to support from Digium and that is the best place for you to get support for your card since someone will proactively triage and track your issue for you.

That being said, I do not see where the transcoder is loaded in the dmesg output above.  Are you sure the wctc4xxp driver is loaded?
By: Walter Klomp (xblurone) 2009-03-09 11:02:14

Oops, guess I got to the limit of the window... Here is the rest of the dmesg output...  

wanpipe8: Enable Zaptel HW DCHAN interface
wanpipe8: Wanpipe device is registered to Zaptel span # 8!
wanpipe6: E1 connected!
wanpipe6: AFT communications enabled!
wanpipe6: AFT Per Port TDM Intr
wanpipe7: E1 disconnected!
wanpipe4: Enable E1 Interrupts
wanpipe5: Enable E1 Interrupts
ADDRCONF(NETDEV_UP): w3g1: link is not ready
wanpipe8: E1 connected!
wanpipe8: AFT communications enabled!
wanpipe8: AFT Per Port TDM Intr
wanpipe6: Enable E1 Interrupts
ADDRCONF(NETDEV_UP): w7g1: link is not ready
ADDRCONF(NETDEV_CHANGE): w8g1: link becomes ready
wanpipe8: Enable E1 Interrupts
wanpipe1: Enable E1 CCS signalling mode!
wanpipe2: Enable E1 CCS signalling mode!
wanpipe3: Enable E1 CCS signalling mode!
wanpipe4: Enable E1 CCS signalling mode!
wanpipe5: Enable E1 CCS signalling mode!
wanpipe6: Enable E1 CCS signalling mode!
wanpipe7: Enable E1 CCS signalling mode!
wanpipe8: Enable E1 CCS signalling mode!
dahdi_echocan_mg2: Registered echo canceler 'MG2'
wctc4xxp: tc400b0: Attached to device at 0000:09:02.0.
wctc4xxp: tc400b0: (G.729a) Transcoder support LOADED (firm ver = 6.12)
wctc4xxp: tc400b0: Installed a Wildcard TC: Wildcard TC400P+TC400M
dahdi_transcode: Registered codec translator 'DTE Encoder' with 120 transcoders (srcs=0000000c, dsts=00000100)
dahdi_transcode: Registered codec translator 'DTE Decoder' with 120 transcoders (srcs=00000100, dsts=0000000c)


I have indeed talked to Digium on several occasions, but all they do is reinstall the Dahdi driver, which is a bit redundant... I am hoping this way I get faster results, which will also benefit all other TC400B users.
By: Digium Subversion (svnbot) 2009-03-11 09:50:07

Repository: dahdi
Revision: 6114

U   linux/trunk/drivers/dahdi/dahdi_transcode.c
U   linux/trunk/include/dahdi/kernel.h

------------------------------------------------------------------------
r6114 | sruffell | 2009-03-11 09:50:06 -0500 (Wed, 11 Mar 2009) | 9 lines

Keep transcoders on a list in registration order.

This fixes a bug where it was possible for there to be a transcoder in position
"1" but not in position "0" if a transcoder hardware driver was loaded,
unloaded, and reloaded again without also reloading dahdi_transcode.  The result
is that codec_dahdi fails to enumerate all the transcoders in the system.

(closes issue ASTERISK-13714)
Reported by: xblurone
------------------------------------------------------------------------

http://svn.digium.com/view/dahdi?view=rev&revision=6114