Summary:ASTERISK-10966: Configuration setting when i am behind nat
Reporter:Naveen (naveenpalani)Labels:
Date Opened:2007-12-04 03:56:48.000-0600Date Closed:2011-06-07 14:03:15
Status:Closed/CompleteComponents:. I did not set the category correctly.
Versions:Frequency of
Environment:Attachments:( 0) sip.conf
( 1) sipdebug.txt
Description:Below are my details:

1. The IP addresses of SIP provider -  proxy1.bandtel.com and
proxy2.bandtel.com / DNS server details - /
2. The Asterisk system - (public IP)/ (internal
IP) subnet mask -
3. The SIP phone?  - We dont use SIP phone to establish the calls, We use
the RUBY AGI for making the automated calls.

4. The bindaddr in my mgcp.conf file is

I could connect the call but once i pick the call the dialstatus still gives me as "NOANSWER".

The message i get in Asterisk prompt is

-- No one is available to answer at this time (1:0/0/0)

My sip provider is clear that he is sending the 200 ok, but its some configuration which has to be done in sip.conf i guess to receive this signal.

Thanks in advance and appreciate your response.
Comments:By: Naveen (naveenpalani) 2007-12-04 04:14:14.000-0600

Attached is my sip.conf file for my sip settings.

Attached is also my sip debug.

I dont know how do understand from where does the asterisk take the local ip address of the system.

Extract from sip debug:

From: "asterisk" <sip:asterisk@>;tag=as7d7f766d

By: Olle Johansson (oej) 2007-12-06 05:11:02.000-0600

This is not a bug report, this is a support request. Please use the asterisk-users mailing list to get help. If you locate a bug, don't hesitate to open another bug, but please check on the asterisk mailing list first or on the IRC channel. Thanks.