|Summary:||ASTERISK-10716: IAX truncking works on one side only|
|Date Opened:||2007-11-08 10:19:05.000-0600||Date Closed:||2011-06-07 14:08:05|
|Environment:||Attachments:||( 0) iax2-trunks.txt|
|Description:||I have two asterisk servers configured for IAX trunking between each other. All calls a re oringinated from server 1 going to server 2. What is happening is the packets going from server 1 (originating server) are not put in a trunk but are sent individually. However, the same calls on the return (packets from server 2 to server 1) are arriving in a trunk. I have changed various configuration such as trunk frequency and jitter buffer etc, but it didn't effect this behavior. I am attaching a tcpdump of the packets going in either direction for a few seconds. The configuration of IAX peers is as follow:|
|Comments:||By: Joshua C. Colp (jcolp) 2007-11-12 08:01:33.000-0600|
Please attach a complete console output with core debug set to level 9, iax2 debug enabled, and iax2 trunk debug enabled. Please also confirm that you have a Zaptel timing device on both sides.
By: Joshua C. Colp (jcolp) 2007-12-17 12:17:17.000-0600
Suspended due to lack of a reply in a month.