| Summary: | ASTERISK-08179: Limited number of channels | ||
| Reporter: | Rodrigo R Passos (rodrigopassos) | Labels: | |
| Date Opened: | 2006-11-23 18:22:57.000-0600 | Date Closed: | 2006-11-29 09:53:56.000-0600 |
| Priority: | Critical | Regression? | No |
| Status: | Closed/Complete | Components: | Core/General |
| Versions: | Frequency of Occurrence | ||
| Related Issues: | |||
| Environment: | Attachments: | ||
| Description: | I have one interface zaptel TE110P with 10 channels enabled for my service provider. Alone the first channel is enable to receive call from this service provider and when a make call using other channel, like Zap/2, the channel is enable from the PBX Siemens EWSD version 10 to receive every calls. The support off my service provider, send to me the follow message that receive in their PABX: First DBAC e the last BPRN. ****** ADDITIONAL INFORMATION ****** When I start asterisk in debug mode, the following messages appear: Primary D-Channel on span 1 up -- B-channel 0/1 restarted on span 1 My zaptel.conf is have the following configuration: span=1,1,0,ccs,hdb3,crc4 bchan=1-10 dchan=16 loadzone=br defaultzone=br and zapata.conf has configured with switchtype=qsig e using their channels above described When a put in my zapata.conf resetinterval for every seconds ago, this channels are unblocked, in the reset time, and the calls can enter by the asterisk. | ||
| Comments: | |||