[Home]

Summary:ASTERISK-07906: No Dialtone
Reporter:Ed Johnson (iloadmin)Labels:
Date Opened:2006-10-09 16:54:33Date Closed:2006-10-09 18:58:09
Priority:MajorRegression?No
Status:Closed/CompleteComponents:Core/General
Versions:Frequency of
Occurrence
Related
Issues:
Environment:Attachments:
Description:Where do I begin:

1. Ubuntu Server 6.06 Dapper
2. Asterisk 1.2.11
3. Lipbri 1.2.3
4. Zaptel 1.28

TDM400P/TDM22

Asterisk installed correctly.  

Zaptel.conf

loadzone=us
defaultzone=us
fxoks=1-2
fxsks=3-4

Zapata.conf

[General options]
;
language=en
immediate=no
context=default
usecallerid=yes
hidecallerid=no
callwaiting=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes
echocancelwhenbridged=yes
echocancel=yes
rxgain=0.0
txgain=0.0
;
;FXS Modules
Group=1
signalling=fxo_ks
context=Internal
channel=>1-2
;
;FXO Modules
Group=2
echocancel=yes
signalling=fxs_ks
context=Incoming
channel=>3-4


Oct  9 15:06:18 iloasterisk kernel: [   89.775170] Zapata Telephony Interface Registered on major 196
Oct  9 15:06:18 iloasterisk kernel: [   89.775187] Zaptel Version: 1.2.8 Echo Canceller: KB1
Oct  9 15:06:18 iloasterisk kernel: [   89.823764] PCI: Found IRQ 5 for device 0000:00:09.0
Oct  9 15:06:18 iloasterisk kernel: [   89.824144] Freshmaker version: 73
Oct  9 15:06:18 iloasterisk kernel: [   89.824429] Freshmaker passed register test
Oct  9 15:06:18 iloasterisk kernel: [   91.206245] Module 0: Installed -- AUTO FXS/DPO
Oct  9 15:06:18 iloasterisk kernel: [   91.206329] Module 1: Not installed
Oct  9 15:06:18 iloasterisk kernel: [   91.206408] Module 2: Not installed
Oct  9 15:06:18 iloasterisk kernel: [   91.403438] Module 3: Installed -- AUTO FXO (FCC mode)
Oct  9 15:06:18 iloasterisk kernel: [   91.413360] Found a Wildcard TDM: Wildcard TDM400P REV I (2 modules)

Oct  9 15:13:00 iloasterisk kernel: [  505.706451] Registered tone zone 0 (United States / North America)
Oct  9 15:13:08 iloasterisk kernel: [  514.052301] Registered tone zone 0 (United States / North America)
Oct  9 15:26:17 iloasterisk -- MARK --
Oct  9 15:39:01 iloasterisk kernel: [ 2066.525420] Registered tone zone 0 (United States / North America)

root@iloasterisk:~# cat /proc/zaptel/1
Span 1: WCTDM/0 "Wildcard TDM400P REV I Board 1"

          1 WCTDM/0/0 FXOKS
          2 WCTDM/0/1 FXOKS
          3 WCTDM/0/2 FXSKS
          4 WCTDM/0/3 FXSKS

after loading ztcfg I get the following:

OK              Wildcard TDM400P REV I Board 1                

Current Alarms:     No alarms.                          
        ?    Sync Source:        Internally clocked                  
        ?    IRQ Misses:               0                            
        ?    Bipolar Viol:             0                            
        ?    Tx/Rx Levels:         0/  0                            
        ?    Total/Conf/Act:       4/  4/  0                        

It appears to be configured but not activated.  Second, only two of the modules are on as oppose to all four.

I do a re-installation and all ends well.  I plug in a new analog phone in port 1 and I get no dial tone.  I plug the same phone into another rj11 jack and I get a dial tone. I plug in the phone that another phone from another room into the tdm400p and no dial tone.

I go into asterisk remote and run zap show status:

iloasterisk*CLI> zap show status
Description                              Alarms     IRQ        bpviol     CRC4
Wildcard TDM400P REV I Board 1           OK         0          0          0

Initally the tdm400p was sharing an irq with video but I changed it location and it is now on irq 5 as oppose to irq 9 but it does not show here.

cat /proc/interrupts
          CPU0
 0:     306885          XT-PIC  timer
 1:        625          XT-PIC  i8042
 2:          0          XT-PIC  cascade
 5:    3048994          XT-PIC  wctdm
 7:          1          XT-PIC  parport0
 8:          3          XT-PIC  rtc
 9:       5588          XT-PIC  eth0
10:          0          XT-PIC  uhci_hcd:usb1
12:         93          XT-PIC  i8042
14:       2141          XT-PIC  ide0
15:         80          XT-PIC  ide1
NMI:          0
LOC:          0
ERR:          0
MIS:          0

I desparetly need help?  Any insight to why this is happening will be more than appreciated.

Regards,

Ed
Comments:By: Joshua C. Colp (jcolp) 2006-10-09 18:58:09

The bug tracker is not a support forum. Please contact Digium technical support for assisstance with your Digium card.