|Summary:||ASTERISK-05776: Enable DTMF proxying via MeetMe|
|Date Opened:||2005-12-04 18:05:18.000-0600||Date Closed:||2011-06-07 14:02:53|
|Description:||In order to explain what I mean, I need to explain what I'm trying to achieve.|
I have an Asterisk box connected on one side to a SIP trunk, on the other side to a ZAP E1 trunk.
A call is generated into Asterisk via SIP, and is then put into a MeetMe pre-configured room. Afterwards, a call is generated on the PRI line to a remote phone, which is then also connected into the MeetMe room. At this point, another call is generated to a remote PBX and is put into the MeetMe room.
If the the user that was called via the PRI presses DTMF signals, the signals are picked up by the remotely connected PBX and are executed. DTMF's originating from the incoming call via SIP are not picked up, and not being sent to the remote PBX.
I believe that the ability to operate DTMF signals within a MeetMe room may prove highly usable, especially is call center situations where a call center attendent may need to render services to a remotely connected service (eg. international operator services).
|Comments:||By: Kevin P. Fleming (kpfleming) 2005-12-12 22:28:27.000-0600|
Feature requests should be posted to the asterisk-users list or the wiki. In addition to that, what you are asking for would be incompatible with the existing MeetMe DTMF-controlled menus, so the implementation would certainly be non-trivial.