Summary:ASTERISK-00743: Lose all audio on TE410P
Reporter:cbanta (cbanta)Labels:
Date Opened:2004-01-05 08:49:39.000-0600Date Closed:2011-06-07 14:00:42
Versions:Frequency of
Description:I seem to be having a problem with the audio on my TE410P. I'm using a Compaq/HP ML310 server, and using E&M signalling on a single T1 span on the card.


When I lose the audio, I also lose the inband DTMF signalling. After finding a post about rpm -qa, I found that if I stop asterisk, and unload the driver modules, then run rpm -qa, and restart everything, it almost always works after that. But with some time the audio will disapear again. When I resart the box, it comes up with no audio. When I first saw the problem, the audio was one way, but now I don't even get that. I've changed my IRQ settings, so the TE410P is by itself, because once in a while I'll see a message double/missed interupt.
Comments:By: bdolljr (bdolljr) 2004-01-07 11:24:36.000-0600

This is the same as 0000680.  I've had this problem for some time.  As a workaround you can set one span on the te410 for e1.  Place a loopback connector in that span and the other three spans will work correctly.  I hope this will be fixed soon.

By: Brian West (bkw918) 2004-01-29 23:32:12.000-0600

Contact digium about firmware updates for this card.